Dicyclopentadiene and Sodium Silicate Microencapsulation for Self-Healing of Concrete
Publication: Journal of Materials in Civil Engineering
Volume 26, Issue 5
Abstract
Considerable interest has been directed in recent years toward the use of self-healing materials in concrete. The concept of microcapsule healing is based on a healing agent being encapsulated and embedded in the concrete. The objective of this study was to evaluate the effects of preparation parameters, namely, temperature, agitation rate, and pH on the shell thickness and size (diameter) of the microcapsules as well as to evaluate the self-healing mechanism in concrete through experimental testing performed in laboratory. Two healing agents were evaluated in this study, i.e., dicyclopentadiene (DCPD) and sodium silicate. Based on the results of the experimental program, it was determined that, as the pH was increased from 3.0 to 3.7, the shell thickness increased for sodium silicate, while the shell thickness reached a minimum at a pH value of 3.4 for DCPD. Sodium silicate shell thickness was almost twice the shell thickness for DCPD. The most uniform and coherent microcapsules were produced at a temperature of 55°C for both sodium silicate and DCPD. For the DCPD microcapsules and up to 49°C, the solution remained an emulsion and no encapsulation took place. An increase in agitation rate resulted in a decrease in the average diameter of the microcapsules for DCPD. On the other hand, the diameter of the microcapsules remained constant for sodium silicate microencapsulation as the agitation rate was increased from 250 to 550 rpm. Testing of concrete specimens modified with the two healing agents (DCPD and sodium silicate microcapsules) was conducted. For sodium silicate, an improvement of 11% in the modulus of elasticity of the concrete was observed after healing for the microcapsules prepared at a pH value of 3.1 and at a content of 5.0%. At other pH values, the effect of the sodium silicate microcapsules on the concrete performance was negligible. For DCPD microcapsules, the healing agent was effective in increasing the modulus of elasticity of concrete after cracking by as much as 30% for the microcapsules prepared at a pH value of 3.1 and at a content of 0.25%.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This work was funded through a grant from the Gulf Coast Research Center for Evacuation and Transportation Resiliency. The authors would like to acknowledge the support of Louisiana Transportation Research Center (LTRC) for granting access to their laboratory.
References
Boh, B., and Sumiga, B. (2008). “Microencapsulation technology and its applications in building construction materials, materials and geoenvironment.” Mater. Geoenviron., 55(3), 329–344.
Brown, E. N., Kessler, M. R., Sottos, N. R., and White, S. R. (2003). “In situ poly(urea-formaldehyde) microencapsulation of dicyclopentadiene.” J. Microencapsulation, 20(6), 719–730.
Brown, E. N., White, S. R., and Sottos, N. R. (2005a). “Retardation and repair of fatigue cracks in a microcapsule toughened epoxy composite. Part I: Manual infiltration.” Compos. Sci. Technol., 65(15–16) 2466–2473.
Brown, E. N., White, S. R., and Sottos, N. R. (2005b). “Retardation and repair of fatigue cracks in a microcapsule toughened epoxy composite. Part II: In situ self-healing.” Compos. Sci. Technol., 65(15–16), 2474–2480.
Dietrich, K., Herma, H., Nastke, R., Bonatz, E., and Teige, W. (1989). “Amino resin microcapsules.” Acta Polymerica, 40(4), 243–251.
Greenwood, N. N., and Earnshaw, A. (1997). Chemistry of the elements, 2nd Ed., Elsevier, Oxford, U.K.
Jonkers, H. M. (2011). “Bacteria-based self-healing concrete.” Heron, 56(1).
Kessler, M. R., Sottos, N. R., and White, S. R. (2003). “Self-healing structural composite materials.” Compos. Appl. Sci. Manuf., 34(8), 743–753.
Li, X., and Hou, Z. (2005). “Scandium-catalyzed copolymerization of ethylene with dicyclopentadiene and terpolymerization of ethylene, dicyclopentadiene, and styrene.” Macromolecules, 38(16), 6767–6769.
Nonat, A. (2004). “Structure and stoichiometry of C-S-H.” Cem. Concr. Res., 34(9) 1521–1528.
Pelletier, M. M., Brown, R., Shukla, A., and Bose, A. (2011). “Self-healing concrete with a microencapsulated healing agent.” Cem. Concr. Res.
Sharp, S. R., and Clemena, G. G. (2004). “State-of-the-art survey of advanced materials and their potential application in highway infrastructure. Final Report.”, Virginia Transportation Research Council, Charlottesville, VA.
Tseng, Y. H., Fang, M. H., Tsai, P. S., and Yang, Y. M. (2005). “Preparation of microencapsulated phase-change materials (MCPCMS) by means of interfacial polycondensation.” J. Microencapsulation, 22(1), 37–46.
White, S. R., et al. (2001). “Autonomic healing of polymer composites.” Nature, 409, 794–797.
Information & Authors
Information
Published In
Copyright
© 2013 American Society of Civil Engineers.
History
Received: Dec 5, 2012
Accepted: Jul 9, 2013
Published online: Jul 12, 2013
Discussion open until: Dec 12, 2013
Published in print: May 1, 2014
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.