Technical Notes
Apr 11, 2013

Viscoelastic Behavior of Silica Particle Compacts under Dynamic Compression

Publication: Journal of Materials in Civil Engineering
Volume 26, Issue 3

Abstract

The viscoelastic behavior of model sandy soils in the form of silica particle compacts under dynamic compression (0.2–10.0 Hz) is reported. The solid content ranges from 24 to 28% by volume, as controlled by compaction. Both viscous and elastic characters are largely governed by the solid part of the compact. The elastic character stems from the stiffness of the silica, while the viscous character stems from the interparticle movement. The elastic character of the solid part (the storage modulus and solid content) is essentially independent of the degree of compaction, indicating validity of the rule of mixtures. The viscous character of the solid part (the loss tangent and solid content) decreases with increasing degree of compaction, indicating decreasing ease of interparticle movement as the degree of compaction increases. The loss modulus and solid content is essentially independent of the degree of compaction. All quantities decrease with increasing frequency. A low degree of compaction is recommended for fast decay of the vibration amplitude; no particular degree of compaction is recommended for mechanical energy dissipation.

Get full access to this article

View all available purchase options and get full access to this article.

References

Ahn, J., Biscontinb, G., and Roësset, J. M. (2011). “Natural frequency and damping ratio of a vertically vibrated surface foundation.” Soil Dyn. Earthquake Eng., 31(4), 674–681.
Ali, F. (2012). “Stabilization of residual soils using liquid chemical.” Electron. J. Geotech. Eng., 17, 115–126.
Ambrosini, R. D. (2006). “Material damping vs. radiation damping in soil-structure interaction analysis.” Comput. Geotech., 33(2), 86–92.
Anastasiadis, A., Senetakis, K., Pitilakis, K., Gargala, C., and Karakasi, I. (2012). “Dynamic behavior of sand/rubber mixtures. Part I: Effect of rubber content and duration of confinement on small-strain shear modulus and damping ratio.” J. ASTM Int., 9(2), JAI103680.
ASTM. (2012). “Standard practice for plastics: Dynamic mechanical properties: Determination and report of procedures.” D4065-12, West Conshohocken, PA.
Bragov, A. M., Lomunov, A. K., Sergeichev, I. V., and Filippov, A. R. (2006). “Dynamic compressibility of clay and loam.” J. Phys. IV, 134(EURODYMAT), 275–280.
Chen, P., and Chung, D. D. L. (2012). “Dynamic mechanical properties of flexible graphite made from exfoliated graphite.” Carbon, 50(1), 283–289.
Chen, P., and Chung, D. D. L. (2013). “Mechanical energy dissipation using cement-based materials with admixtures.” ACI Mater. J., 110(3), 279–290.
Chonkaew, W., Minghvanish, W., Kungliean, U., Rochanawipart, N., and Brostow, W. (2011). “Vulcanization characteristics and dynamic mechanical behavior of natural rubber reinforced with silane modified silica.” J. Nanosci. Nanotechnol., 11(3), 2018–2024.
Chung, D. D. L. (2001). “Materials for vibration damping.” J. Mater. Sci., 36(24), 5733–5737.
Chung, D. D. L. (2002). “Improving cement-based materials by using silica fume.” J. Mater. Sci., 37(4), 673–682.
Cui, Z., Wu, J. H., Chen, H., and Li, D. (2011). “A quantitative analysis on the energy dissipation mechanism of the non-obstructive particle damping technology.” J. Sound Vib., 330(11), 2401–2692.
Ladouce-Stelandre, L., Bomal, Y., Flandin, L., and Labarre, D. (2003). “Dynamic mechanical properties of precipitated silica filled rubber: influence of morphology and coupling agent.” Rubber Chem. Technol., Vol. 76, ASCE, Reston, VA, 145–159.
Lukas, R. G. (1997). “Delayed soil improvement after dynamic compaction.” Geotechnical Special Publication, Vol. 69, American Society of Civil Engineers, Reston, VA, 409–420.
Omar, M. N., Abbiss, C. P., Taha, M. R., and Nayan, K. A. M. (2011). “Prediction of long-term settlement on soft clay using shear wave velocity and damping characteristics.” Eng. Geol., 123(4), 259–270.
Reddy, C. S., and Das, C. K. (2006a). “Polypropylene-nanosilica-filled composites: Effects of epoxy-resin-grafted nanosilica on the structural, thermal, and dynamic mechanical properties.” J. Appl. Polym. Sci., 102(3), 2117–2124.
Reddy, C. S., and Das, C. K. (2006b). “Thermal and dynamic mechanical properties of low density polyethylene-silica nanocomposites: Effect of zinc-ion coating on nanosilica.” Polym. Compos., 14(3), 281–290.
Ward, A. A. M., Stoll, B., von Soden, W., Herminghaus, S., and Mansour, A. A. (2003). “Effect of cyclic deformations on the dynami- mechanical properties of silica-filled butyl rubber.” Macromol. Mater. Eng., 288(12), 971–979.
Yanagida, T., Matchett, A., Asmar, B., Langston, P., Walters, K., and Coulthard, M. (2003a). “Damping characterization of particulate materials using low intensity vibrations: Effect of experimental variables and their interpretation.” J. Chem. Eng. Jpn., 36(11), 1339–1346.
Yanagida, T., Matchett, A., Asmar, B., Langston, P., Walters, K., and Coulthard, M. (2003b). “Damping characterization of particulate materials using low intensity vibrations: Methodology for determining damping properties from acceleration transmissivity data and comparison with existing direct experimental techniques.” J. Chem. Eng. Jpn., 36(11), 1327–1338.
Yanagida, T., Matchett, A. J., and Coulthard, J. M. (2002). “Damping and elastic properties of binary powder mixtures.” Powder Technol., 127(2), 107–115.
Zhao, Z., et al. (2012). “Influence of particle type amd silane coupling agent on properties of particle-reinforced styrene-butadiene rubber.” Polym.-Plastics Tech. Eng., 51(3), 268–272.

Information & Authors

Information

Published In

Go to Journal of Materials in Civil Engineering
Journal of Materials in Civil Engineering
Volume 26Issue 3March 2014
Pages: 551 - 553

History

Received: Sep 6, 2012
Accepted: Apr 9, 2013
Published online: Apr 11, 2013
Discussion open until: Sep 11, 2013
Published in print: Mar 1, 2014

Permissions

Request permissions for this article.

Authors

Affiliations

Composite Materials Research Laboratory, Univ. at Buffalo, State Univ. of New York, Buffalo, NY 14260-4400; formerly, Box 1430, School of Civil Engineering, Harbin Institute of Technology, 66 West Dazhi St., Nangang District, Harbin 150006, P.R. China. E-mail: [email protected]
D. D. L. Chung [email protected]
Composite Materials Research Laboratory, Univ. at Buffalo, State Univ. of New York, Buffalo, NY 14260-4400 (corresponding author). E-mail: [email protected]

Metrics & Citations

Metrics

Citations

Download citation

If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.

Cited by

View Options

Get Access

Access content

Please select your options to get access

Log in/Register Log in via your institution (Shibboleth)
ASCE Members: Please log in to see member pricing

Purchase

Save for later Information on ASCE Library Cards
ASCE Library Cards let you download journal articles, proceedings papers, and available book chapters across the entire ASCE Library platform. ASCE Library Cards remain active for 24 months or until all downloads are used. Note: This content will be debited as one download at time of checkout.

Terms of Use: ASCE Library Cards are for individual, personal use only. Reselling, republishing, or forwarding the materials to libraries or reading rooms is prohibited.
ASCE Library Card (5 downloads)
$105.00
Add to cart
ASCE Library Card (20 downloads)
$280.00
Add to cart
Buy Single Article
$35.00
Add to cart

Get Access

Access content

Please select your options to get access

Log in/Register Log in via your institution (Shibboleth)
ASCE Members: Please log in to see member pricing

Purchase

Save for later Information on ASCE Library Cards
ASCE Library Cards let you download journal articles, proceedings papers, and available book chapters across the entire ASCE Library platform. ASCE Library Cards remain active for 24 months or until all downloads are used. Note: This content will be debited as one download at time of checkout.

Terms of Use: ASCE Library Cards are for individual, personal use only. Reselling, republishing, or forwarding the materials to libraries or reading rooms is prohibited.
ASCE Library Card (5 downloads)
$105.00
Add to cart
ASCE Library Card (20 downloads)
$280.00
Add to cart
Buy Single Article
$35.00
Add to cart

Media

Figures

Other

Tables

Share

Share

Copy the content Link

Share with email

Email a colleague

Share