Laboratory Investigation of Different Standards of Phase Separation in Crumb Rubber Modified Asphalt Binders
Publication: Journal of Materials in Civil Engineering
Volume 25, Issue 12
Abstract
The phase separation between polymer additives and virgin asphalt binders during hot storage is an important issue in the asphalt industry. Traditionally, it has been customary to evaluate the degree of phase separations in polymerized asphalts by laboratory testing, such as the cigar tube test (CTB). However, the test circumstances, temperature, and storage time vary depending on different standards used in many countries. Based on a comprehensive literature review, the range of temperatures and oven storage times were selected to be 140–180°C and 2–7 days, respectively. The phase separation of 11 storage stability conditions selected from 12 different places using crumb rubber modified asphalts (CRMAs) were compared and evaluated in this study. The CRMAs produced in the laboratory were made with PG 64-22 virgin binder and ambient crumb rubber with various concentrations (10, 15, and 20% by weight of virgin binder). The CTB was used as the storage stability test method, and percent separation was obtained from the relationship between the top and bottom portion of the tube. The storage stability tests indicated that the viscosity of the CRMAs had a significant influence in the phase separation of the binders; the higher the viscosity of the binder, the less the degree of the separation.
Get full access to this article
View all available purchase options and get full access to this article.
References
ASTM. (2013). “Standard test methods for rubber products—Chemical analysis.” D297, West Conshohocken, PA.
Bahia, H. U., and Davis, R. (1994). “Effect of crumb rubber modifiers (CRM) on performance related properties of asphalt binders.” J. Assoc. Asphalt Paving Technologists, 63, 414–449.
Bahia, H. U., Zhai, H., and Rangel, A. (1998). “Evaluation of stability, nature of modifier, and short-term aging of modified binders using new tests: LAST, PAT, and modified RTFO.” Transportation Research Record, 1638, 64–71.
Becker, M. Y., Muller, A. J., and Rodriguez, Y. (2002). “Use of rheological compatibility criteria to study SBS modified asphalts.” J. Appl. Polym. Sci., 90(7), 1772–1782.
Biro, S., Bartha, L., Deak, G., and Fanto, E. (2001). “The production and use of rubber-bitumen compositions.” Scientific Publication of MOL PLC, 97–103.
Chen, J. S., and Huang, C. C. (2007). “Fundamental characterization of SBS-modified asphalt mixed with sulfur.” J. Appl. Polym. Sci., 103(5), 2817–2825.
Cooper, S. B., Jr., Mohammad, L. N., and Abadie, C. (2007). “Evaluation of field projects using crumb rubber modified asphaltic concrete.” FHWA, 393, 1–8.
DuPont. (2005). 〈http://www.dupont.com/asphalt/link2.html〉 (Aug. 1, 2012).
Emery, S., and O’Connell, J. (1999). “Development of a high performance SBS modified binder for production.” 7th Conf. Asphalt Pavements Southern Africa.
Fu, H., Xie, L., Dou, D., Li, L., Yu, M., and Yao, S. (2007). “Storage stability and compatibility of asphalt binder modified by SBS graft copolymer.” Constr. Build. Mater., 21(7), 1528–1533.
Garcia-Morales, M., Partal, P., Navarro, F. J., and Gallegos, C. (2006). “Effect of waste polymer addition on the rheology of modified bitumen.” Fuel, 85(7–8), 936–945.
Geiger, A., Biro, S., Bartha, L., Deak, G., and Miskolczi, N. (2005). “Performance of waste polymer modified bitumens.” WasteTech-2005 Congress, Moscow.
Giavarini, C., Filippis, P., Santarelli, M. L., and Scarsella, M. (1996). “Production of stable polypropylene modified bitumens.” Fuel, 75(6), 682–683.
Gonzalez, O., Munoz, M. E., Santamaria, A., Garcia-Morales, M., Navarro, F. J., and Partal, P. (2004). “Rheology and stability of bitumen/EVA blends.” European Polymer J., 40(10), 2365–2372.
Ho, S., Church, R., Klassen, K., Law, B., Macleod, D., and Zanzotto, L. (2006). “Study of recycled polyethylene materials as asphalt modifiers.” Can. J. Civ. Eng., 33(8), 968–981.
Hofsink, W., Kong, N. Y., and Dickinson, M. N. (2004). “The performance of seals and asphalt using SBS modified binder on the N3 toll road.” Proc. 8th Conf. on Asphalt Pavements for Southern Africa, 12–16.
Iqbal, M. H., Hussein, I. A., Al-Abdul, H. I., and Amin, M. B. (2006). “Rheological investigation of the influence of acrylate polymers on the modification of asphalt.” J. Appl. Polym. Sci., 102(4), 3446–3456.
Isacsson, U., and Lu, X. (1999). “Characterization of bitumens modified with SEBS, EVA and EBA polymers.” J. Mater. Sci., 34(15), 3737–3745.
Jin, H., Gao, G., Zhang, Y., Sun, K., and Fan, Y. (2002). “Improved properties of polystyrene-modified asphalt through dynamic vulcanization.” Polymer Testing, 21(6), 633–640.
Morgan, P., and Mulder, A. (1995). The shell bitumen industrial handbook, Shell Bitumen, 143–196.
Navarro, F. J., Partal, P., Garcıá-Morales, M., Martinez-Boza, F. J., and Gallegos, C. (2007). “Bitumen modification with a low-molecular-weight reactive isocyanate-terminated polymer.” Fuel, 86(15), 2291–2299.
Navarro, F. J., Partal, P., Martınez-Boza, F., and Gallegos, C. (2004). “Thermo-rheological behaviour and storage stability of ground tire rubber-modified bitumens.” Fuel, 83(14–15), 2041–2049.
Palit, S. K., Sudhakar, K., and Pandey, B. B. (2004). “Laboratory evaluation of crumb rubber modified asphalt mixes.” J. Mater. Civ. Eng., 16(1), 45–53.
Polacco, G., Stastna, J., Biondi, D., and Zanzotto, L. (2006). “Relation between polymer architecture and nonlinear viscoelastic behavior of modified asphalts.” Curr. Opin. Colloid Interface Sci., 11(4), 230–245.
Putman, P. J. (2005). “Quantification of the effects of crumb rubber in CRM binders.” Ph.D. Dissertation, Dept. of Civil Eng., Clemson Univ, Clemson, SC.
Shen, J., and Amirkhanian, S. N. (2005). “The influence of crumb rubber modifier (CRM) microstructures on the high temperature properties of CRM binders.” Int. J. Pavement Eng., 6(4), 265–271.
Sun, D., and Lu, W. (2003). “Investigation and improvement of storage stability of SBS modified asphalt.” Petrol. Sci. Tech., 21(5–6), 901–910.
Sun, D., Ye, F., Shi, F., and Lu, W. (2006). “Storage stability of SBS-modified road asphalt.” Petrol. Sci. Tech., 24(9), 1067–1077.
Way, G. B. (1998). “OGFC meets CRM-where the rubber meets the rubber-12 years of the durable success.” The Asphalt Conf.
Yildirim, Y. (2007). “Polymer modified asphalt binders.” Constr. Build. Mater., 21(1), 66–72.
Yu, J., Zeng, X., Wu, S., Wang, L., and Liu, G. (2007). “Preparation and properties of montmorillonite modified asphalts.” Mater. Sci. Eng., 444(1–2), 233–238.
Zanzotto, L., and Kennepohl, G. J. (1996). “Development of rubber and asphalt binders by depolymerization and devulcanization of scrap tires in asphalt.”, Transportation Research Board, Washington, DC, 51–58.
Information & Authors
Information
Published In
Copyright
© 2013 American Society of Civil Engineers.
History
Received: Aug 23, 2012
Accepted: Nov 30, 2012
Published online: Dec 3, 2012
Discussion open until: May 3, 2013
Published in print: Dec 1, 2013
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.