Influence of Cyclic Humidity on Carbonation of Concrete
Publication: Journal of Materials in Civil Engineering
Volume 25, Issue 12
Abstract
Carbonation of concrete under various humidity conditions was examined in this study. Cylindrical specimens were subjected to accelerated carbonation using 50% carbon dioxide by volume at 25°C. Two relative humidities (RHs) (70 and 90% RH) and two humidity cycles (70–90% and 50–90% RH) were applied during the process. The results showed that carbonation of concrete was affected by the ambient humidity, humidity cycles, and surface geometry. The extent of carbonation was quantified using the coefficient of carbonation, which is the ratio of the carbonation depth to the square root of time. The maximum coefficient of carbonation occurred at 70% RH, and humidity cycles induced coefficients of carbonation between those induced at 70 and 90% RH. Specimens with curved surfaces had higher coefficients of carbonation than specimens with plane surfaces. The carbonation coefficients measured in the accelerated tests were also related to the carbonation of on-site concrete, which indicates that taking humidity cycling into account results in better prediction of accelerated carbonation than assuming a single humidity.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors acknowledge the financial support of the Taiwan Building Technology Center at the National Taiwan University of Science and Technology, Taipei, Taiwan.
References
ASTM Standard C39. (2010). “Standard test method for compressive strength of cylindrical concrete specimens.” ASTM International, West Conshohocken, PA.
ASTM Standard C496. (2004). “Standard test method for splitting tensile strength of cylindrical concrete specimens.” ASTM International, West Conshohocken, PA.
Broomfield, J. P. (2007). Corrosion of steel in concrete, Taylor & Francis, New York, 6–7.
Castellote, M., and Andrade, C. (2008). “Modelling the carbonation of cementitious matrixes by means of the unreacted-core model, UR-CORE.” Cem. Concr. Res., 38(12), 1374–1384.
Central Weather Bureau of Taiwan. (2009). 1897–2008 Statistics of climate changes in Taiwan, Central Weather Bureau, Ministry of Transportation and Communication, Taipei, Taiwan.
Central Weather Bureau of Taiwan. (2011). “Air quality information—Songshan Air Monitoring Station.” 〈http://edw.epa.gov.tw/ResultAirSite.aspx?siteid=290〉 (Aug. 1, 2011).
Chang, J. J., Yeih, W., Huang, R., and Chen, C. T. (2004). “Suitability of several current used concrete durability indices on evaluating the corrosion hazard for carbonated concrete.” Mater. Chem. Phys., 84(1), 71–78.
CPC-18. (1988). “CPC-18 measurement of hardened concrete carbonation depth.” Mater. Struct., 21(6), 453–455.
Darwin, D., Mindess, S., and Young, J. F. (2003). Concrete, Prentice-Hall, Upper Saddle River, NJ, 495–496.
Da Silva, F. G., Helene, P., Castro-Borges, P., and Liborio, J. B. L. (2009). “Sources of variations when comparing concrete carbonation results.” J. Mater. Civ. Eng., 21(7), 333–342.
Fernandez Bertos, M., Simons, S. J. R., Hills, C. D., and Carey, P. J. (2004). “A review of accelerated carbonation technology in the treatment of cement-based materials and sequestration of CO(2).” J. Hazard. Mater., 112(3), 193–205.
Hunkeler, H. (2005). “Corrosion in reinforced concrete: Processes and mechanism.” Corrosion in reinforced concrete structures, H. Böhni, ed., CRC, Roca Raton, FL, 1–2.
Hyvert, N., Sellier, A., Duprat, F., Rougeau, P., and Francisco, P. (2010). “Dependency of C-S-H carbonation rate on pressure to explain transition from accelerated tests to natural carbonation.” Cem. Concr. Res., 40(11), 1582–1589.
Johannesson, B., and Utgenannt, P. (2001). “Microstructural changes caused by carbonation of cement mortar.” Cem. Concr. Res., 31(6), 925–931.
Loo, Y., Chin, M., Tam, C., and Ong, K. (1994). “A carbonation prediction model for accelerated carbonation testing of concrete.” Mag. Concr. Res., 46(168), 191–200.
Neville, A. M. (1996). Properties of concrete, Wiley, New York, 498–499.
Papadakis, V. G., Vayenas, C. G., and Fardis, M. N. (1989). “A reaction engineering approach to the problem of concrete carbonation.” Am. Inst. Chem. Eng. J., 35(10), 1639–1650.
Papadakis, V. G., Vayenas, C. G., and Fardis, M. N. (1991a). “Fundamental modeling and experimental investigation of concrete carbonation.” ACI Mater. J., 88(4), 363–373.
Papadakis, V. G., Vayenas, C. G., and Fardis, M. N. (1991b). “Physical and chemical characteristics affecting the durability of concrete.” ACI Mater. J., 88(2), 186–196.
Roy, S. K., Poh, K. B., and Northwood, D. O. (1999). “Durability of concrete-accelerated carbonation and weathering studies.” Build. Environ., 34(5), 597–606.
Sisomphon, K., and Franke, L. (2007). “Carbonation rates of concretes containing high volume of pozzolanic materials.” Cem. Concr. Res., 37(12), 1647–1653.
Thiery, M., Villain, G., Dangla, P., and Platret, G. (2007). “Investigation of the carbonation front shape on cementitious materials: Effects of the chemical kinetics.” Cem. Concr. Res., 37(7), 1047–1058.
Information & Authors
Information
Published In
Copyright
© 2012 American Society of Civil Engineers.
History
Received: Sep 4, 2012
Accepted: Nov 30, 2012
Published online: Dec 3, 2012
Discussion open until: May 3, 2013
Published in print: Dec 1, 2013
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.