Commonly Used Porous Building Materials: Geomorphic Pore Structure and Fluid Transport
Publication: Journal of Materials in Civil Engineering
Volume 25, Issue 12
Abstract
Knowledge of microscopic geomorphic structures is critical to understanding transport processes in porous building materials. X-ray scans were obtained of a variety of commonly used porous building materials to both qualitatively and quantitatively evaluate their pore structures. The specimens included natural materials (two sandstones and a limestone) and engineered materials (three types of concretes and a brick). Scanned images were processed to reconstruct the geomorphic structures of these materials. Random walk analyses were performed on the reconstructed pore structures to estimate macroscopic transport properties (including tortuosity, specific surface, and permeability). The effective porosity and permeability of these materials were also experimentally determined and compared to computed values. Calibration of the threshold pixel value used in the postprocessing of X-ray images against measured effective porosity appears to be a more appropriate method of selecting this value than the typical approach, which employs selection based solely on observed histograms. The resulting permeabilities computed by using a calibrated threshold pixel value compare better with the measured permeabilities. This study also demonstrates that the relatively homogeneous and heterogeneous pore structures associated with the natural and engineered building materials under investigation can be captured by X-ray tomography.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
Support for this work was provided by Defense Threat Reduction Agency, HDTRA1- 08-C-0021. We thank Ms. Lindsay Meador for help in the laboratory.
References
Anta, J. A., Mora-Sero, I., Dittrichc, T., and Bisquert, J. (2008). “Interpretation of diffusion coefficients in nanostructured materials from random walk numerical simulation.” Phys. Chem. Chem. Phys., 10(30), 4478–4485.
ASTM. (2002). “Soil and rock; building stones.” D5084-00, West Conshohocken, PA.
Brooks, R. H., and Corey, A. T. (1964). “Hydraulic properties of porous media.” Hydrology papers, Colorado State University, Fort Collins, CO.
Cnudde, V., and Jacobs, P. J. S. (2004). “Monitoring of weathering and conservation of building materials through non-destructive x-ray computed microtomography.” Environ. Geol., 46(3–4), 477–485.
Coker, D. A., Torquato, S., and Dunsmuir, J. H. (1996). “Morphology and physical properties of Fontainebleau sandstone via a tomographic analysis.” J. Geophys. Res., 101(B8), 17497–17506.
Derucher, K., Korfiatis, G., and Ezeldin, A. (1994). Materials for civil and highway engineers, 3rd Ed., Prentice Hall, NJ.
El Abd, A. E. G., Czachor, A., Milczarek, J. J., and Pogorzelski, J. (2005). “Neutron radiography studies of water migration in construction porous materials.” IEEE Trans. Nucl. Sci., 52(1), 299–304.
Feller, W. (1968). An introduction to probability theory and its applications, Wiley, New York.
Fredrich, J. D., DiGiovanni, A. A., and Noble, D. R. (2006). “Predicting macroscopic transport properties using microscopic image data.” J. Geophys. Res., 111(B3), B03201.
Hall, C., and Hoff, W. W. (2002). Water transport in bricks, stones and concrete, Spon Press, New York.
Lockington, D. A., and Parlange, J. Y. (2003). “Anomalous water absorption in porous materials.” J. Phys. D, 36(6), 760–767.
Lu, S., Landis, E. N., and Keane, D. T. (2006). “X-ray microtomographic studies of pore structure and permeability in portland cement concrete.” Mater. Struct., 39(6), 611–620.
Maier, R. S., Kroll, D. M., Kutsovsky, Y. E., Davis, H. T., and Bernard, R. S. (1998). “Simulation of flow through bead packs using the lattice boltzmann method.” Phys. Fluids, 10(1), 60–74.
Manwart, C., Aaltosalmi, U., Koponen, A., Hilfer, R., and Timoten, J. (2002). “Lattice-boltzmann and finite-difference simulations for the permeability for three-dimensional porous media.” Phys. Rev. E, 66(1), 016702.1–016702.11.
MATLAB, V7.7 [Computer software]. MathWorks, Inc., Natick, MA.
Nakashima, Y., and Kamiya, S. (2007). “Mathematica programs for the analysis of three-dimensional pore connectivity and anisotropic tortuosity of porous rocks using x-ray computed tomography image data.” J. Nucl. Sci. Technol., 44(9), 1233–1247.
Nakashima, Y., and Watanabe, Y. (2002). “Estimate of transport properties of porous media by microfocus x-ray computed tomography and random walk simulation.” Water Resour. Res., 38(12), 1272.
O’Connor, R. M., and Fredrich, J. T. (1999). “Microscale flow modelling in geologic materials.” Phys. Chem. Earth A, 24(7), 611–616.
Pham, D. L., Xu, C., and Prince, J. L. (2000). “Current methods in medical image segmentation.” Ann. Rev. Biomed. Eng., 2, 315–337.
Piller, M., Schena, G., Nolich, M., Favretto, S., Radaelli, F., and Rossi, E. (2009). “Analysis of hydraulic permeability in porous pedia: From high resolution x-ray tomography to direct numerical simulation.” Transp. Porous Media, 80(1), 57–78.
Promentilla, M., Sugiyama, T., Hitomi, T., and Takeda, N. (2009). “Quantification of tortuosity in hardened cement pastes using synchrotron-based x-ray computed microtomography.” Cem. Concr. Res., 39(6), 548–557.
Richards, L. A. (1931). “Capillary conduction of liquids through porous mediums.” Phys., 1(5), 318–333.
Roels, S., and Carmeliet, J. (2006). “Analysis of moisture flow in porous materials using microfocus x-ray radiography.” Int. J. Heat Mass Tran., 49(25–26), 4762–4772.
Savidge, C. (2010). “Characterization of porous building materials for agent transport predictions using artificial neural networks.” M.S. thesis, University of Vermont, Burlington, VT.
White, J. A., Borja, R. I., and Fredrich, J. T. (2006). “Calculating the effective permeability of sandstone with multiscale lattice boltzmann/finite element simulations.” Acta Geotech., 1(4), 195–209.
Willson, C. S., Stacey, R. W., Ham, K., and Thompson, K. E. (2004). “Investigating the correlation between residual nonwetting phase liquids and pore-scale geometry and topology using synchrotron x-ray tomography.” Proc. SPIE, U. Bonse, ed., Vol. 5535, The International Society for Optics and Photonics (SPIE), Bellingham, WA, 101–111.
Zhao, W. S., and Ioannidis, M. A. (2007). “Effect of napl film stability on the dissolution of residual wetting napl in porous media: A pore-scale modeling study.” Adv. Water Resour., 30(2), 171–181.
Information & Authors
Information
Published In
Journal of Materials in Civil Engineering
Volume 25 • Issue 12 • December 2013
Pages: 1803 - 1812
Copyright
© 2013 American Society of Civil Engineers.
History
Received: Dec 30, 2011
Accepted: Oct 2, 2012
Published online: Oct 4, 2012
Discussion open until: Mar 4, 2013
Published in print: Dec 1, 2013
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.