Behavior of PVA Fiber-Reinforced Cementitious Composites under Static and Impact Flexural Effects
Publication: Journal of Materials in Civil Engineering
Volume 25, Issue 10
Abstract
The effects of fiber volume fraction and matrix properties on the mechanical performance of 15-mm thick short cut PVA (polyvinyl alcohol) fiber-reinforced cementitious composites were investigated experimentally. Fiber volume ratios of mixtures varied between 0.5 and 2.0% by volume. Two different water to cement ratios () have been used (0.25 and 0.35) for matrix production. Test results have shown that both fiber content and matrix strength have significant effects on flexural behavior and impact resistance of these composites. The combined effect of and fiber volume fraction on impact resistance was more drastic compared with specific fracture energies of composites determined under static loads. Especially under the effects of impact loads, higher values of and increased PVA fiber content significantly improved the energy absorption capacity of these composites.
Get full access to this article
View all available purchase options and get full access to this article.
References
Bindiganavile, V., and Banthia, N. (2005). “Impact response of the fiber-matrix bond in concrete.” Can. J. Civ. Eng., 32(5), 924–933.
Bogazkesen, K. K. (2011). “Investigation on the mechanical properties of PVA fiber reinforced cement based composites.” M.S. thesis, Istanbul Technical Univ., Institute of Science and Technology, Istanbul, Turkey.
Brookes, A. J., and Meijs, M. (2008). Cladding of buildings, Taylor and Francis, London.
Enfedaque, A., Cendón, D., Gálvez, F., and Sánchez-Gálvez, V. (2011). “Failure and impact behavior of facade panels made of glass fiber reinforced cement (GRC).” Eng. Failure Anal., 18(7), 1652–1663.
Habel, K., and Gauvreau, P. (2009). “Behavior of reinforced and posttensioned concrete members with a UHPFRC overlay under impact loading.” J. Struct. Eng., 135(3), 292–300.
Li, V., and Kanda, T. (1998). “Innovations Forum: Engineered cementitious composites for structural applications.” J. Mater. Civ. Eng., 10(2), 66–69.
Li, V., and Leung, C. K. Y. (1992). “Steady-state and multiple cracking of short random fiber composites.” J. Eng. Mech., 118(11), 2246–2264.
Li, V. C. (2003). “On engineered cementitious composites (ECC): A review of the material and its applications.” J. Adv. Concr. Technol., 1(3), 215–230.
Mohammadi, Y., Carkon-Azad, R., Singh, S. P., and Kaushik, S. K. (2009). “Impact resistance of steel fibrous concrete containing fibres of mixed aspect ratio.” Constr. Build. Mater., 23(1), 183–189.
Nataraja, M. C., Nagaraj, T. S., and Basavaraja, S. B. (2005). “Reproportioning of steel fibre reinforced concrete mixes and their impact resistance.” Cem. Concr. Res., 35(12), 2350–2359.
Nili, M., and Afroughsabet, V. (2010a). “The effects of silica fume and polypropylene fibers on the impact resistance and mechanical properties of concrete.” Constr. Build. Mater., 24(6), 927–933.
Nili, M., and Afroughsabet, V. (2010b). “Combined effect of silica fume and steel fibers on the impact resistance and mechanical properties of concrete.” Int. J. Impact Eng., 37(8), 879–886.
Pan, Y. G., Watson, A. J., and Hobbs, B. (2001). “Transfer of impulsive loading on cladding panels to the fixing assemblies.” Int. J. Impact Eng., 25(10), 949–964.
RILEM TC FMC-50, Hillerborg, A.(1985). “The theoretical basis of a method to determine the fracture energy GF of concrete.” J. Mater. Struct., 18(4), 291–296.
Sahmaran, M., Lachemi, M., and Li, V. C. (2009). “Assessing the durability of engineered cementitious composites under freezing and thawing cycles.” J. ASTM Int., 6(7).
Shimizu, K., Kanakubo, T., Kanda, T., and Nagai, S. (2004). “Shear behavior of steel reinforced PVA-ECC beams.” 13th World Conf. on Earthquake Engineering, PN 704, International Association for Earthquake Engineering.
Starr, C. M., and Krauthammer, T. (2005). “Cladding-structure interaction under impact loads.” J. Struct. Eng., 131(8), 1178–1185.
Toutanji, H., McNeil, S., and Bayasi, Z. (1998). “Chloride permeability and impact resistance of polypropylene-fiber-reinforced silica fume concrete.” Cem. Concr. Res., 28(7), 961–968.
Yu, J. H., Chen, W., Yu, M. X., and Hua, Y. E. (2010). “The microstructure of self-healed PVA ECC under wet and dry cycles.” Mater. Res., 13(2), 225–231.
Yunsheng, Z., Wei, S., Zongjin, L., Xiangming, Z., Eddie,., and Chungkong, C. (2008). “Impact properties of geopolymer based extrudates incorporated with fly ash and PVA short fiber.” Constr. Build. Mater., 22(3), 370–383.
Information & Authors
Information
Published In
Copyright
© 2013 American Society of Civil Engineers.
History
Received: Jan 31, 2012
Accepted: Sep 18, 2012
Published online: Sep 22, 2012
Discussion open until: Feb 22, 2013
Published in print: Oct 1, 2013
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.