Durability of Underwater-Made Butt Steel Adhesive Joints under Laboratory Conditions: Theoretical Model
Publication: Journal of Materials in Civil Engineering
Volume 25, Issue 10
Abstract
Epoxide resins are widely employed as adhesives and are being increasingly used in engineering industries. However, adhesively bonded components may suffer significant loss in strength when exposed to environmental attack. The most severe threat is water, and adhesive joint strength decay can be accelerated if externally applied stresses are present. In this work an attempt has been made to develop a model to predict the theoretical durability of butt mild steel joints made underwater. The model was based on experimentally obtained data using double-torsion underwater-made joints and ambient air-made double-torsion and butt joints. All joints were subjected to similar conditions, i.e., static stresses in the presence of water. The first step in developing a test method and model for predicting the environmental fracture data of butt joints made underwater has been proposed that was independent of the detailed butt joint geometry. The model appeared to be successful and accounted for the phenomenon of crack tip blunting that occurs in the adhesives. This is the first time such a model is reported in the literature that may be useful when all variables are included.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The author would like to thank the UK Ministry of Defense for their financial support.
References
Adams, R. D. (2005). Adhesive bonding: science, technology and applications, Woodhead Publishing, Abirgton, Cambridge, UK.
Adams, R. D., and Comyn, J. (2000). “Joining using adhesives.” Assembly Autom., 20(2), 109–117.
Adams, R. D., Comyn, J., and Wake, W. C. (1997). Structural adhesive joints in engineering, Chapman & Hall, London.
Adams, R. D., Hinton, R. J., and Kii, C. Y. (2003). “The durability of adhesive joints and why they still break.” Proc., 17th Int. Symp. Swissbonding, Rapperswil, Switzerland, 319–327.
Blackman, B. R. K., and Kinloch, A. J. (2004). “The durability of adhesive joints in hostile environments.” The application of fracture mechanics to polymers, adhesives and composites, D. R. Moore, ed., Elsevier, Oxford, UK, 143–148.
Broughton, W. (1999). Durability performance of adhesive joints, NPL Publications, Teddington, Middlesex, UK.
Broughton, W., and Gower, M. (2001). Preparation and testing of adhesive joints, NPL Publications, Teddington, Middlesex, UK.
Comyn, J. (1997). Adhesion science, Royal Society of Chemistry, London.
Davies, R. J., and Kinloch, A. J. (1989). “The surface characterization and adhesive bonding of aluminium.” J. Adhesion, 13, 8–22.
Duncan, B., Abbott, S., and Roberts, R. (1999). Adhesive tack, NPL Publications, Teddington, Middlesex, UK.
Duncan, B., and Crocker, L. (2001). Characterisation of flexible adhesives for design, NPL Publications, Teddington, Middlesex, UK.
Dunn, D. J. (2003). “Adhesives and sealants–technology, applications and markets.”, FLD Enterprises, Rapra, Shropshire, UK.
Dunn, D. J. (2004). “Engineering and structural adhesives.”, FLD Enterprises, Rapra, Shropshire, UK.
Florio, J., and Miller, D. (2004). Handbook of coating additives, 2nd Ed., Marcel Dekker, New York.
Forsdyke, K. L., and Starr, T. F. (2002). “Thermoset resin.”, Rapra, Shropshire, UK.
Frantzis, P. (2008). “Durability of adhesive joints made underwater.” J. Mater. Civ. Eng., 20(10), 635–639.
Frantzis, P. (2009). “Predicting the environmental lifetime of adhesive joints under laboratory conditions.” J. Mater. Civ. Eng., 21(11), 637–642.
Gledhill, R. A., Kinloch, A. J., and Shaw, S. J. (1979). “A self-toughening mechanism in epoxide resins.” J. Mater. Sci., 14(7), 1769–1772.
Gledhill, R. A., Kinloch, A. J., and Shaw, S. J. (1980). “A model for predicting joint durability.” J. Adhesion, 11(1), 3–15.
Kinloch, A. J. (1987). Adhesion and adhesives: science and technology, Chapman and Hall, London.
Kinloch, A. J. (2002). “The durability of adhesive joints.” The mechanics of adhesion, D. A. Dillard and A. V. Pocius, eds., Elsevier, London, 661–698.
Kinloch, A. J., Maxwell, D. L., and Young, R. J. (1985a). “Micro-mechanisms of crack propagation in hybrid-particulate composites.” J. Mater. Sci., 4, 1276–1279.
Kinloch, A. J., Maxwell, D. L., and Young, R. J. (1985b). “The fracture of hybrid-particulate composites.” J. Mater. Sci., 20(11), 4169–4184.
Kinloch, A. J., and Riew, C. K. (1996). Toughened plastics II: Novel approaches in science and engineering, American Chemical Society, Washington, DC.
Kinloch, A. J., and Taylor, A. C. (2004). “The use of fracture mechanics techniques to predict the service life of adhesive joints.” The application of fracture mechanics to polymers, adhesives and composites, D. R. Moore, ed., Elsevier, Oxford, UK, 187–192.
Lee, L. H. (1991). Adhesive bonding, Plenum Press, New York.
Packham, D. E. (2005). Handbook of adhesion, 2nd Ed., Plenum Press, Shropshire, UK.
Polaski, G., et al. (2005). “Bonding elastomers: a review of adhesives and processes.”, Rapra, Shropshire, UK.
Stewart, R. J., Ransom, T. C., and Hlady, V. (2011). “Natural underwater adhesives.” Inc. J. Polym. Sci. Part B: Polym. Phys., 49(11), 757–771.
Information & Authors
Information
Published In
Copyright
© 2013 American Society of Civil Engineers.
History
Received: May 16, 2011
Accepted: Sep 10, 2012
Published online: Sep 16, 2013
Published in print: Oct 1, 2013
Discussion open until: Feb 16, 2014
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.