Microstructural Association Model for Upscaling Prediction of Asphalt Concrete Dynamic Modulus
Publication: Journal of Materials in Civil Engineering
Volume 25, Issue 9
Abstract
Multiscale modeling is becoming an increasingly useful method of evaluating the behaviors of asphalt concrete. Reasons for this increased interest include the fact that many of the critical behaviors of this material are affected by localized behaviors that cannot be completely captured using more traditional continuum approaches. Computational methods are popular for this type of evaluation because in principle they can directly account for many of the localized mechanisms. However, computational expense can be excessive, particularly if all of these localized mechanisms are accounted for rigorously. An alternative method of multiscale modeling relying on analytical models is developed and presented in this paper. The model is referred to as the microstructure association model because it accounts for the ways that the multiple scales within asphalt concrete associate together to yield the gross behaviors of the finished composite, asphalt concrete. This model is formed from the hypothesis that asphaltic composites at different length scales evolve along a continuum, which is related to the degree of internal structuralization that exists within the composite. In this way asphalt mixture may behave in a quantitatively similar way as asphalt mastic if the concentration of particles within the mastic produces the same degree of internal structuralization as that which exists in the asphalt mixture. Through this modeling effort two separate, but possibly related, mechanisms are identified: (1) interaction of particles separated by some distance, but still influenced by an adsorbed and nonadsorbed asphalt binding medium; and (2) close-proximity contacts of aggregate particles that lead to a significant increase in stiffness with relatively small changes in volumetric concentration. Each of these mechanisms is modeled separately within the microstructural association model and combined using a rational mechanical analog approach. The model is characterized using only experiments on asphalt mastic at different concentrations, but is verified with its ability to upscale to the modulus of asphalt concrete. In the final section of this paper the ability of the model to perform useful engineering tasks is shown when it is used to assess the impact of asphalt content and air void content changes on the modulus of two different materials.
Get full access to this article
View all available purchase options and get full access to this article.
References
AASHTO. (2009a). “Bulk density (“unit weight”) and voids in aggregate.”, Washington, DC.
AASHTO. (2009b). “Uncompacted void content of fine aggregate.”, Washington, DC.
AASHTO. (2009c). “Standard method of test for uncompacted void content of coarse aggregate (as influenced by particle shape, surface texture and grading).”, Washington, DC.
Abbas, A., Masad, E., Papagiannakis, T., and Shenoy, A. (2005). “Modeling asphalt mastic stiffness using discrete element analysis and micromechanics-based models.” Int. J. Pavement Eng., 6(2), 137–146.
Bollobás, B., and Riordan, O. (2006). Percolation, Cambridge University Press, Cambridge, MA.
Christensen, R. M., and Lo, K. H. (1979). “Solutions for effective shear properties in three phase sphere and cylinders models.” J. Mech. Phys. Solids, 27(4), 315–329.
Dai, Q., and You, Z. (2007). “Prediction of creep stiffness of asphalt mixture with micromechanical finite-element and discrete-element models.” J. Eng. Mech., 133(2), 163–173.
Delaporte, B., DiBenedetto, H., Chaverot, P., and Gauthier, G. (2007). “Linear viscoelastic properties of bituminous materials: From binders to mastics.” J. Assoc. Asphalt Paving Technol., 76(1), 445–494.
Ferry, J. D. (1961). Viscoelastic properties of polymers, Wiley, New York.
Guddati, M. N., Feng, Z., and Kim, Y. R. (2002). “Towards a micromechanics-based procedure to characterize fatigue performance of asphalt concrete.”, Transportation Research Board, Washington, DC.
Herve, E., and Zaoui, A. (1993). “n-layered inclusion-based micromechanical modeling.” Int. J. Eng. Sci., 31(1), 1–10.
Heukelom, W. (1965). “The role of filler in bituminous mixes.” J. Assoc. Asphalt Paving Technol., 34, 396–429.
Kim, H., Wagoner, M. P., and Buttlar, W. G. (2008). “Simulation of fracture behavior in asphalt concrete using a heterogeneous cohesive zone discrete element model.” J. Mater. Civ. Eng., 20(8), 552–563.
Kim, M., and Buttlar, W. G. (2011). “Differential scheme effective medium theory for hot-mix asphalt prediction.” J. Mater. Civ. Eng., 23(1), 69–78.
Kim, Y. R. (2003). “Mechanistic fatigue characterization and damage modeling of asphalt mixtures.” Ph.D. dissertation, Texas A&M Univ., College Station, TX.
Kim, Y. R., Lee, S., Seo, Y., and El-Haggan, O. (2005). “Impact of price reductions on the long-term pavement performance of HMA mixes in North Carolina.”, North Carolina Dept. of Transportation, Raleigh, NC.
Luo, R., and Lytton, R. L. (2011). “Self-consistent micromechanics models of an asphalt mixture.” J. Mater. Civ. Eng., 23(1), 49–55.
Mortazavi, M., and Moulthrop, J. S. (1993). “The SHRP materials reference library.” Rep. SHRP-A-646, Strategic Highway Research Program, National Research Council, Washington, DC.
Rigden, P. J. (1947). “The use of fillers in bituminous road surfacings: A study of filler-binder systems in relation to filler characteristics.” J. Soc. Chem. Ind. London, 66(9), 299–309.
Sahimi, M. (1994). Applications of percolation theory, Taylor and Francis, Bristol, PA.
Shu, X., and Huang, B. (2008a). “Dynamic modulus prediction of HMA mixtures based on the viscoelastic micromechanical model.” J. Mater. Civ. Eng., 20(8), 530–538.
Shu, X., and Huang, B. (2008b). “Micromechanics-based dynamic modulus prediction of polymeric asphalt concrete mixtures.” Composite Part B, 39(4), 704–713.
To, L. T., and Stachurski, Z. H. (2004). “Random close packing of spheres in a round cell.” J. Non-Cryst. Solids, 333(2), 161–171.
Traxler, R. N. (1937). “The evaluation of mineral powders as fillers for asphalts.” J. Assoc. Asphalt Paving Technol., 8(1), 60–77.
Underwood, B. S. (2011). “Multiscale constitutive modeling of asphalt concrete.” Ph.D. dissertation, North Carolina State Univ., Raleigh, NC.
Underwood, B. S., and Kim, Y. R. (2011). “Experimental investigation into the multiscale behavior of asphalt concrete.” Int. J. Pavement Eng., 12(4), 357–370.
Underwood, B. S., and Kim, Y. R. (2012a). “Comprehensive evaluation of small strain viscoelastic behavior of asphalt concrete.” ASTM J. Test. Eval., 40(4), 99–110.
Underwood, B. S., and Kim, Y. R. (2012b). “Investigation of asphalt concrete microstructure for developing a multiscale experimental program.” Int. J. Pavement Eng., 14(5), 498–516.
Yin, H. M., Buttlar, W. G., Paulino, G. H., and DiBenedetto, H. (2008). “Assessment of existing micro-mechanical models for asphalt mastics considering viscoelastic effects.” Road Mater. Pavement Des., 9(1), 31–57.
Yoshioka, D. (2007). Statistical physics: An introduction, Springer, New York.
Zhu, H., Chang, S. C., and Lou, A. K. (2000). “2-D normal compliances for elastic and visco-elastic binder contact with finite particle size effect.” Int. J. Solids Struct., 37(52), 4477–4488.
Information & Authors
Information
Published In
Copyright
© 2013 American Society of Civil Engineers.
History
Received: Mar 5, 2012
Accepted: Aug 14, 2012
Published online: Aug 24, 2012
Discussion open until: Jan 24, 2013
Published in print: Sep 1, 2013
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.