Characterization of Fatigue Damage in Asphalt Mixtures Using Pseudostrain Energy
Publication: Journal of Materials in Civil Engineering
Volume 25, Issue 2
Abstract
Fatigue cracking and permanent deformation develop simultaneously in asphalt mixtures under repeated destructive loading regardless of temperature. Because these two distinctively different damage mechanisms always occur together, it is not possible to obtain pure cracking damage or pure permanent deformation damage in any asphalt mixture by varying the temperature or loading level. This paper develops an energy-based method to separate fatigue cracking from permanent deformation in terms of energy consumption. Specifically, the dissipated pseudostrain energy (DPSE) expended on cracking is separated from that expended on permanent deformation. Controlled-strain repeated direct tension (RDT) tests are performed on asphalt mixture specimens to determine their nondestructive properties, critical nonlinear viscoelastic properties, and destructive properties. The total DPSE, which is the amount of energy dissipated for the fatigue damage, including both fatigue cracking and permanent deformation, is calculated based on the critical nonlinear viscoelastic properties in order to separate both linear and nonlinear viscoelastic effects from the strain energy that is available to cause damage. The energy distribution in an asphalt mixture under destructive loading is investigated at the microscopic level. Balance equations are established between the true stress/strain/energy of the intact material and the apparent stress/strain/energy of the bulk specimen. These balance equations are utilized to completely formulate the DPSE for cracking and the DPSE for permanent deformation, respectively. As a result, the DPSE for cracking is separated from the DPSE for permanent deformation. The formulations of the two types of DPSE and the RDT data will be used to calculate the amount of each type of DPSE. The DPSE for cracking will be used to predict the crack growth, average crack size, and number of cracks in the asphalt mixture under repeated destructive loading. The DPSE for permanent deformation will also be used to predict the growth of permanent deformation. This will be introduced in following papers. This paper is one of a series of companion papers that characterize nondestructive and destructive behaviors of an asphalt mixture under tensile loading.
Get full access to this article
View all available purchase options and get full access to this article.
References
Arambula, E., Masad, E., and Epps Martin, A. (2007). “Moisture susceptibility of asphalt mixtures with known field performance—Evaluated with dynamic analysis and crack growth model.”, Transportation Research Board, Washington, DC.
ASTM. (2010). “Standard test method for determining fatigue failure of compacted asphalt concrete subjected to repeated flexural bending.” ASTM D7460, West Conshohocken, PA.
Bahia, H., Zhai, H., Bonnetti, K., and Kose, S. (1999) “Nonlinear viscoelastic and fatigue properties of asphalt binders.” J. Assoc. Asphalt Paving Technol., 68, 1–34.
Barksdale, R. D. (1972). “Laboratory evaluation of rutting in base course materials.” Proc., 3rd Int. Conf. on the Structural Design of Asphalt Pavements, Vol. 1, International Society for Asphalt Pavements, Lino Lakes, MN, 161–174.
Carpenter, S. H., Ghuzlan, K. A., and Shen, S. (2003). “A fatigue endurance limit for highway and airport pavements.” Annual Meeting of the Transportation Research Board, Transportation Research Board, Washington, DC.
Elber, W. (1971). “Damage tolerance in aircraft structures.” STP 486, ASTM, Philadelphia, 230–242.
Gibson, N. H., Schwartz, C. W., Schapery, R. A., and Witczak, M. W. (2003). “Viscoelastic, viscoplastic, and damage modeling of asphalt concrete in unconfined compression.”, Transportation Research Board, Washington, DC.
Jones, D. R. (1993). “SHRP materials reference library: Asphalt cements: A concise data compilation.”, National Research Council, Washington, DC.
Kenis, W. J. (1977). “Predictive design procedures, VESYS users manual.”, Federal Highway Administration, McLean, VA.
Kim, Y. R. (2008). Modeling of asphalt concrete, 1st Ed., McGraw-Hill, New York.
Kim, Y. R., Daniel, J. S., and Wen, H. (2002). “Fatigue performance evaluation of west track asphalt mixtures using viscoelastic continuum damage approach.”, Federal Highway Administration, Washington, DC.
Kose, S., Guler, M., Bahia, H., and Masad, E. (2000) “Distribution of strains within hot-mix asphalt binders applying imaging and finite-element techniques.”, Transportation Research Board, Washington, DC.
Little, D. N., Lytton, R. L., Williams, D., and Chen, J. W. (1998). “Fundamental properties of asphalts and modified asphalts.” Final Research Rep., Texas Transportation Institute, Texas A&M Univ., College Station, TX.
Luo, X., Luo, R., and Lytton, R. L. (2012). “An energy-based mechanistic approach to characterize crack growth of asphalt mixtures.” J. Mater. Civ. Eng., (Aug. 30, 2012).
Luo, X., Luo, R., and Lytton, R. L. (2013). “Characterization of asphalt mixtures using controlled-strain repeated direct tension test.” J. Mater. Civ. Eng., 25(2), 194–207.
Lytton, R. L. (2000). “Characterizing asphalt pavement for performance.”, Transportation Research Board, National Research Council, Washington, DC.
Lytton, R. L. (2004). “Adhesive fracture in asphalt concrete mixtures.” Course Notes.
Masad, E., Castelo Branco, V., Little, D., and Lytton, R. L. (2007). “A unified method for the analysis of controlled-strain and controlled-stress fatigue testing.” Int. J. Pavement Eng., 9(4), 233–246.
Masad, E., and Somadevan, N. (2002). “Microstructural finite-element analysis of influence of localized strain distribution of asphalt mix properties.” J. Eng. Mech., 128(10), 1105–1114.
Monismith, C. L., Ogawa, N., and Freeme, C. R. (1975). “Permanent deformation characterization of subgrade soils due to repeated loading.”, Transportation Research Board, Washington, DC.
National Cooperative Highway Research Program (NCHRP). (2002). “2002 design guide, design of new and rehabilitated pavement structure.” Draft Final Report prepared for National Cooperative Highway Research Program, NCHRP 1-37A, Transportation Research Board, Washington, DC.
Roberts, F. L., Kandhal, P. S., Brown, E. R., Lee, D.-Y., and Kennedy, T. W. (1996). Hot mix asphalt materials, mixture design, and construction, 2nd Ed., NAPA Education Foundation, Lanham, MD.
Roque, R., Buttlar, W. G., Ruth, B. E., Tia, M., Dickison, S. W., and Reid, B. (1997). “Evaluation of SHRP indirect tension tester to mitigate cracking in asphalt pavements and overlays.” Final Report, FDOT B-9885, Univ. of Florida, Gainesville, FL.
Roylance, D. (2001). “Introduction to fracture mechanics.” Dept. of Materials Science and Engineering, Massachusetts Institute of Technology, Cambridage, MA.
Schapery, R. A. (1984). “Correspondence principles and a generalized J-integral for large deformation and fracture analysis of viscoelastic media.” Int. J. Fract., 25(3), 195–223.
Si, Z., Little, D. N., and Lytton, R. L. (2002). “Characterization of microdamage and healing of asphalt concrete mixtures.” J. Mater. Civ. Eng., 14(6), 461–470.
Sousa, J. B., et al.,. (1994). “Permanent deformation response of asphalt aggregate mixes.”, Strategic Highway Research Program, National Research Council, Washington DC.
Superpave Models Team. (1999). “Task F—Advanced mixture characterization.”, Dept. of Civil and Environmental Engineering, Arizona State Univ., Tempe, AZ.
Texas Dept. of Transportation (TxDOT). (2004). “Standard specifications for construction and maintenance of highways, streets, and bridges.” 〈ftp://ftp.dot.state.tx.us/pub/txdot-info/des/specs/specbook.pdf〉 (Oct. 26, 2012).
Texas Dept. of Transportation (TxDOT). (2005). “Design of bituminous mixtures.” 〈ftp://ftp.dot.state.tx.us/pub/txdot-info/cst/TMS/200-F_series/pdfs/bit204.pdf〉 (Nov. 7, 2012).
Walubita, L. F., Epps Martin, A., Cleveland, G. S., and Lytton, R. L. (2006). “Computation of pseudo strain energy and Paris law fracture coefficients from surface energy and uniaxial strain-controlled tension test data.” Int. J. Pavement Eng., 7(3), 167–178.
Wineman, A. S., and Rajagopal, K. R. (2000). Mechanical response of polymers: Introduction, Cambridge University Press, Cambridge, UK.
Information & Authors
Information
Published In
Copyright
© 2013 American Society of Civil Engineers.
History
Received: Dec 7, 2011
Accepted: Jun 28, 2012
Published online: Aug 27, 2012
Published in print: Feb 1, 2013
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.