Physical and Marshall Properties of Borogypsum Used as Filler Aggregate in Asphalt Concrete
Publication: Journal of Materials in Civil Engineering
Volume 25, Issue 2
Abstract
For construction of roads and highways, a large amount of aggregate usage is needed. Because the natural aggregate resources are limited, the demand for the use of alternative aggregates has increased. For this reason, borogypsum in Turkey was used as a mineral filler aggregate in hot-mix asphalt concrete. When this is directly released to nature as boron waste, it may cause various environmental problems. In order to prevent this waste’s harmful effects to the environment, the use of borogypsum as an alternative aggregate in highway engineering may be effective. For this purpose, the physical properties of borogypsum were investigated by thermogravimetry differential thermal analysis (TG-DTA), x-ray diffraction (XRD), and scanning electron microscope energy dispersion analysis of x-ray (SEM-EDAX). Also, the surface properties of borogypsum were identified by polarized optical microscope (POM). In this study, two groups of hot-mix asphalt concrete were obtained. For the first group, asphalt concrete was produced with limestone aggregate, and for the second one, borogypsum was used as mineral filler in asphalt concrete. In both groups, limestone was used as fine and coarse aggregate. Marshall stability and other mechanical properties were determined. It is believed that the evaluated borogypsum has a similar crystal structure with tincalconite and its usage for hot-mix climate regions may be effective to reduce problems. Also, another crucial finding is that using borogypsum as a mineral filler aggregate in asphalt concrete can be convenient for the binder course of pavements exposed to heavy traffic potential.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This study was carried out in Karadeniz Tech. University Geotechnical-Transportation and Solid State Physics Laboratories. So thanks to them for all. The authors also thank Prof. Dr. M. Muhtar Kocakerim for his support in providing material and Prof. Dr. Ekrem Yanmaz for his help in using the laboratory.
References
Ahmedzade, P., and Sengoz, B. (2009). “Evaluation of steel slag coarse aggregate in hot mix asphalt concrete.” J. Hazard. Mater., 165(1–3), 300–305.
Ahmedzade, P., Tıgdemir, M., and Kalyoncuoglu, S. F. (2007). “Laboratory investigation of the properties of asphalt concrete mixtures modified with TOP–SBS.” Constr. Build. Mater., 21(3), 626–633.
Asphalt Institute. (1993). “Mix designs methods for asphalt concrete and other hot mix types.”, Asphalt Institute, Lexington, KY.
ASTM C127. Standard test method for density, relative density (specific gravity), and absorption of coarse aggregate.
ASTM C128. Standard test method for density, relative density (specific gravity), and absorption of fine aggregate.
ASTM C136. Standard test method for Sieve analysis of fine and coarse aggregates.
ASTM D854. Standard test methods for specific gravity of soil solids by water pycnometer.
ASTM D946. Standard specification for penetration-graded asphalt cement for use in pavement construction.
ASTM D1559. Test method for resistance of plastic flow of bituminous mixtures using marshall apparatus.
Boncukcuoglu, R., Kocakerim, M. M., Kocadagıstan, E., and Yılmaz, M. T. (2003). “Recovery of boron of the sieve reject in the production of borax.” Resour., Conserv. Recycl., 37(2), 147–157.
Boncukcuoglu, R., Yılmaz, M. T., Kocakerim, M. M., and Kocadagıstan, E. (2002). “Utilization of borogypsum as set retarder in portland cement production.” Cem. Concr. Res., 32(3), 471–475.
Chandara, C., Azizli, K. A. M., Ahmad, A. A., and Sakai, E. (2009). “Use of waste gypsum to replace natural gypsum as set retarders in portland cement.” Waste Manage., 29(5), 1675–1679.
Christogerou, A., Kavas, T., Pontikes, Y., Koyas, S., Tabak, Y., and Angelopoulos, G. N. (2009). “Use of boron wastes in the production of heavy clay ceramics.” Ceram. Int., 35(1), 447–452.
Elbeyli, I. Y., Derun, E. M., Gulen, J., and Piskin, S. (2003). “Thermal analysis of borogypsum and its effects on the physical properties of portland cement.” Cem. Concr. Res., 33(11), 1729–1735.
Hassan, H. F. (2005). “Recycling of municipal solid incinerator ash in hot-mix asphalt concrete.” Constr. Build. Mater., 19(2), 91–98.
Huang, B., Shu, X., and Li, G. (2005). “Laboratory investigation of portland cement concrete containing recycled asphalt pavements.” Cem. Concr. Res., 35(10), 2008–2013.
Kavas, T. (2006). “Use of boron as a fluxing agent in production of red mud brick.” Build. Environ., 41(12), 1779–1783.
Özdemir, M., and Öztürk, N. U. (2003). “Utilization of clay wastes containing boron as cement additives.” Cem. Concr. Res., 33(10), 1659–1661.
Sengoz, B., and Topal, A. (2005). “Use of asphalt roofing shingle in HMA.” Constr. Build. Mater., 19(5), 337–346.
Turkish General Highway Directorate. (2006). “Turkish highway specification limits.”, Ankara, Turkey.
Uslu, T., and Arol, A. I. (2004). “Use of boron as an additive in red bricks.” Waste Manage., 24(2), 217–220.
Wong, Y. D., Sun, D. D., and Lai, D. (2007). “Value-added utilisation of recycled concrete in hot-mix asphalt.” Waste Manage., 27(2), 294–301.
Information & Authors
Information
Published In
Copyright
© 2013 American Society of Civil Engineers.
History
Received: Dec 1, 2011
Accepted: May 11, 2012
Published online: May 15, 2012
Published in print: Feb 1, 2013
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.