Variation of Resilient Modulus, Strength, and Modulus of Elasticity of Stabilized Soils with Postcompaction Moisture Contents
Publication: Journal of Materials in Civil Engineering
Volume 25, Issue 2
Abstract
This study evaluated the effect of postcompaction moisture variations on the resilient modulus (), unconfined compressive strength (UCS), and modulus of elasticity () of cementitiously stabilized subgrade soils. Class C fly ash (CFA) and hydrated lime were used as the stabilizing agents. Specimens were compacted at optimum moisture content () with different percentages of stabilizers (i.e., 10% CFA and 6% lime) and then either dried or wetted to different moisture contents prior to testing for , UCS, and . Results showed that , UCS, and values increased due to drying and decreased due to wetting. -moisture, UCS-moisture, and E-moisture models were developed and proved to be useful in predicting the variations of , UCS, and values of stabilized subgrade soils with moisture changes. These models can be used, in the new mechanistic-empirical pavement design approach (M-E PDG), to predict , UCS, and values of stabilized subgrade soils with moisture variations.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors are grateful to Dr. Joakim Laguros, Emeritus Professor, and Dr. Charbel Khoury, KMA Engineers, for their technical assistance.
References
ASTM. (1998). “Standard test methods for liquid limit, plastic limit, and plasticity index of soils.” D4318, West Conshohocken, PA.
ASTM. (2003). “Standard test methods for wetting and drying compacted soil-cement mixtures.” D559, West Conshohocken, PA.
ASTM. (2006a). “Standard test method for unconfined compressive strength of cohesive soil.” D2166, West Conshohocken, PA.
ASTM. (2006b). “Standard test method for using pH to estimate the soil-lime proportion requirement for soil stabilization.” D6276, West Conshohocken, PA.
ASTM. (2007). “Standard test method for particle-size analysis of soils.” D422-63, West Conshohocken, PA.
Guthrie, S., Michener, J., Wilson, B., and Eggett, D. (2009). “Effects of environmental factors on construction of soil-cement pavement layers.” (CD-ROM), Transportation Research Record 2104, Transportation Research Board, Washington, DC.
Guthrie, W. S., Roper, M. B., and Eggett, D. L. (2008). “Evaluation of laboratory durability tests for stabilized aggregate base materials.” (CD-ROM), Annual meeting, Transportation Research Board, Washington, DC.
Halsted, G. E. (2006). Performance of soil-cement and cement-modified soil for pavements: Research synopsis, Publication IS691, Portland Cement Association, Skokie, IL.
Jha, J. N., and Gill, K. S. (2006). “Effect of rice husk ash on lime stabilization.” J. Inst. Eng., 87, 33–39.
Kalankamary, G. P., and Donald, D. T. (1963). “Development of a freeze-thaw test for design of soil- cement.” Highw. Res. Board, Bull., 36, 77–96.
Khoury, N. N., and Zaman, M. (2004). “Correlation among resilient modulus, moisture variation and soil suction for subgrade soils.” Transportation Research Record 1874, Transportation Research Board, Washington, DC, 99–107.
Khoury, N. N., and Zaman, M. M. (2007). “Influences of various cementitious agents on the performance of stabilized aggregate base subjected to wet-dry cycles.” Int. J. Pavement Eng., 8(4), 265–276.
Megat, J. M., and Noor, L. (1994). “Durability and strength characteristics of cement stabilized modified melaka series.” J. Islam. Acad. Sci., 7(2), 137–141.
Miller, G. A., and Zaman, M. (2000). “Field and laboratory evaluation of cement kiln dust as a soil stabilizer.” Transportation Research Record 1714, Transportation Research Board, Washington, DC, 25–32.
Parsons, R. L., and Kneebone, E. (2005). “Field performance of fly ash stabilized subgrades.” Ground Improv., 9(1), 33–38.
Parsons, R. L., Kneebone, E., and Milburn, J. P. (2004). “Use of cement kiln dust for subgrade stabilization.”, Kansas Dept. of Transportation, Topeka, KS.
Scullion, T., and Harris, P. (1998). “Forensic evaluation of three failed cement-treated base pavements.” Transportation Research Record 1611, Transportation Research Board, Washington, DC, 10–18.
Şenol, A., Bin-Shafique, M. S., Edil, T. B, and Benson, C. H. (2002). “Use of Class C fly ash for stabilization of soft sub-grade.” Proc., 5th Int. Congress on Advances in Civil Engineering.
Solanki, P., Khoury, N., and Zaman, M. (2009). “Performance assessment of cementitiously stabilized subgrade soils.” (CD-ROM). Annual meeting, Transportation Research Board, Washington, DC.
Syed, I., Scullion, T., and Harris, J. P. (1999). “Durability of recycled and stabilized pavement materials.” Geotech. Special Publ., 89, 25–36.
Information & Authors
Information
Published In
Copyright
© 2013 American Society of Civil Engineers.
History
Received: Apr 10, 2011
Accepted: Mar 5, 2012
Published online: May 2, 2012
Published in print: Feb 1, 2013
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.