Portable Pressure Device to Evaluate Lateral Formwork Pressure Exerted by Fresh Concrete
Publication: Journal of Materials in Civil Engineering
Volume 25, Issue 6
Abstract
Use of a reliable and accurate measuring system to determine lateral pressure exerted on formwork by self-consolidating concrete can lead to economic and safe formwork systems. In this paper, a portable and field-compatible pressure device is developed to enable factors affecting lateral pressure of fresh concrete on formwork system to be explored prior to conducting onsite full-scale tests. The pressure device requires a sample of 16 L of fresh concrete to determine lateral pressure envelope that can be exerted by a concrete column of up to 13 m in height. The pressure device enables the simulation of such concrete head using an overhead pressure exerted onto the fresh concrete. A number of parameters are used to validate the pressure device, including placement rate as well as mix designs of various paste volume, slump flow, ratio of water to cementitious material, maximum size of aggregate, and dosages of chemical admixtures. The test results indicated that the repeatability of the lateral pressure values obtained using the pressure device shows relative error of about 7%. The validation of the pressure device clearly showed that the device adequately reflects the effect the various factors affecting lateral pressure characteristics of fresh concrete.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors would like to acknowledge the National Ready-Mix Concrete Education and Research Foundation and the Strategic Development Council (SDC) of the American Concrete Institute, as well as member companies of the SDC, for their financial support.
References
American Concrete Institute (ACI). (2004). “Guide to formwork for concrete.”, American Concrete Institute, Farmington Hills, MI, 32.
Andreas, L., and Cathleen, H. (2003). “Pressure of self-compacting concrete on the formwork.” Proc., 3rd Int. RILEM Symp. on Self-Compacting Concrete, O., Wallevik and I., Nielsson, eds., RILEM Publications S.A.R.L., France, 288–295.
Andriamanantsilavo, N. R., and Amziane, S. (2004). “Maturation of fresh cement paste within 1- to 10-m-large formworks.” Cem. Concr. Res., 34(11), 2141–2152.
Arslan, M., Osman, S., and Serkan, S. (2005). “Effects of formwork surface materials on concrete lateral pressure.” Constr. Build. Mater., 19(4), 319–325.
Assaad, J., and Khayat, K. H. (2004). “Variations of lateral and pore water pressure of self-consolidating concrete at early age.” ACI Mater. J., 101(4), 310–317.
Assaad, J., and Khayat, K. H. (2005). “Effect of coarse aggregate characteristics on lateral pressure exerted by self-consolidating concrete.” ACI Mater. J., 102(3), 145–153.
Assaad, J., and Khayat, K. H. (2006). “Effect of viscosity-enhancing admixtures on formwork pressure and thixotropy of self-consolidating concrete.” ACI Mater. J., 103(4), 280–287.
Assaad, J., Khayat, K. H., and Mesbah, H. (2003). “Variation of formwork pressure with thixotropy of self-consolidating concrete.” ACI Mater. J., 100(1), 29–37.
Billberg, P. (2003). “Form pressure generated by self-compacting concrete.” Proc., 3rd Int. RILEM Symp. on Self-Compacting Concrete, O., Wallevik and I., Nielsson, eds., RILEM Publications S.A.R.L., France, 271–280.
Brameshuber, W., and Uebachs, S. (2003). “Investigations of the formwork pressure using self-compacting concrete.” Proc., 3rd Int. RILEM Symp. on Self-Compacting Concrete, Reykjavik, Iceland, 281–287.
Brite EuRam Proposal. (2000). “Self-compacting concrete.”, 〈http://scc.ce.luth/report/formsurface〉.
Gardner, N. J., and Ho, P. T.-J. (1979). “Lateral pressure of fresh concrete.” ACI J. Proc., 76(7), 809–820.
Khayat, K. H., and Assaad, J. J. (2008). “Measurement systems for determining formwork pressure of highly flowable concrete.” Mater. Struct., 41(1), 37–46.
Khayat, K. H., and Omran, A. F. (2009). “State-of-the-art review of form pressure exerted by self-consolidating concrete.”, Ready-Mix Concrete (RMC) Research and Education Foundation, American Concrete Institute (ACI), and Strategic Development Council (SDC), 〈http://www.concretesdc.org/projects/SCCreport.htm〉.
Khayat, K. H., and Omran, A. F. (2011). “Field validation of SCC formwork pressure prediction models.” J. Concr. Int., 33(6), 33–39.
Kwon, S. H., Shah, S. P., Phung, Q. T., Kim, J. H., and Lee, Y. (2010). “Intrinsic model to predict formwork pressure.” ACI Mater. J., 107(1), 20–26.
Lange, D. A., Struble, L. J., Dambrosia, M. D., Shen, L., Tejeda-Dominguez, F., Birch, B. F., and Brinks, A. J. (2008). “Performance and acceptance of self-consolidating concrete: Final report.”, A Report of the Findings of ICT-R44 “Performance and Acceptance of Self-Consolidating Concrete, Illinois Center for Transportation, Rantoul, IL, 36.
Macklin, C. (1946). “Pressure of plastic concrete in forms.” Proc. Soc. Exp. Stress Anal., 4(1), 112–122.
Omran, A. F., Naji, S., and Khayat, K. H. (2011). “Portable vane test to assess structural build-up at rest of self-consolidating concrete.” ACI Mater. J., 108(6), 628–637.
Roby, H. G. (1935). “Pressure of concrete on forms.” Civ. Eng., 5, 162.
Rodin, S. (1952). “Pressure of concrete on formwork.” ICE Proceedings, 1(6), 709–746.
Information & Authors
Information
Published In
Copyright
© 2013 American Society of Civil Engineers.
History
Received: Dec 21, 2011
Accepted: Jul 10, 2012
Published online: Aug 27, 2012
Published in print: Jun 1, 2013
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.