Thermomechanical Characterization of NiTiNb Shape Memory Alloy for Concrete Active Confinement Applications
Publication: Journal of Materials in Civil Engineering
Volume 24, Issue 10
Abstract
Despite growing interest in the use of shape memory alloys (SMAs) in civil structures, much is still to be understood about their behavior in real loading environments. This experimental work focuses on characterizing the thermomechanical behavior of a thermally prestressed NiTiNb SMA under thermal and loading conditions pertinent to civil structural applications. The work aims at exploring the feasibility of using this type of alloy in developing seismic retrofitting spirals that could be used to actively confine vulnerable reinforced concrete columns to improve their flexural ductility and shear strength under earthquake loading. Differential scanning calorimetry tests are conducted to determine the transformation temperatures of the used alloy. A testing program is carried out on 2-mm-diameter NiTiNb wires to examine the recovery stress of prestrained wires and the monotonic and cyclic behaviors of thermally prestressed wires under various testing durations and ambient temperatures. A thermal chamber is used to induce a realistic range of ambient temperature ( to 55°C) during testing. The results show that the recovery stress is quite stable within the studied range of temperature. The prestressed NiTiNb alloy exhibits nonlinear behavior with a modulus that is highly dependent on ambient temperature.
Get full access to this article
View all available purchase options and get full access to this article.
References
Andrawes, B., and DesRoches, R. (2007a). “Comparison between shape memory alloy seismic restrainers and other bridge retrofit devices.” J. Bridge Eng., 12(6), 700–709.
Andrawes, B., and DesRoches, R. (2007b). “Effect of ambient temperature on the hinge opening in bridges with shape memory alloy seismic restrainers.” Eng. Struct., 29(9), 2294–2301.
DesRoches, R., McCormick, J., and Delemont, M. (2004). “Cyclic properties of superelastic shape memory alloy wires and bars.” J. Struct. Eng., 130(1), 38–46.
Duerig, T. W., ed., (1990). Engineering aspects of shape memory alloys, Butterworth-Heinemann, London.
Duerig, T. W., and Melton, K. N. (1989). “Wide hysteresis NiTiNb alloys.” The martensitic transformation in science and technology, Hornbogen, E., and Jost, N., eds., Nitinol Devices and Components, Inc., Fremont, CA, 191–198.
El-Tawil, S., and Ortega-Rosales, J. (2004). “Prestressing concrete using shape memory alloy tendons.” ACI Struct. J., 101(6), 846–851.
Fu, X., Guojun, M., Zhao, X., and Xu, H. (2009) “Effects of Nb content on yield strength of NiTiNb alloys in martensite state.” Chin. J. Aeronaut., 22(6), 658–662.
Krstulovic-Opara, N., and Thiedeman, P. D. (2000) “Active confinement of concrete members with self-stressing composites.” ACI Mater. J., 97(3), 297–308.
McCormick, J., DesRoches, R., Fugazza, D., and Auricchio, F. (2007). “Seismic assessment of concentrically braced steel frames with shape memory alloy braces.” J. Struct. Eng., 133(6), 862–870.
Melton, K. N., Simpson, J., and Duerig, T. W. (1986). “A new wide hysteresis NiTi based shape memory alloy and its applications.” Proc., Int. Conf. on Martensitic Transformations (ICOMAT-86), Japan Institute of Metals, Sendai, Japan, 1053–1058.
Moser, K., Bergamini, A., Christen, R., and Czaderski, C. (2005). “Feasibility of concrete prestressed by shape memory alloy short fibers.” Mater. Struct., 38(5), 593–600.
Ocel, J.,et al.(2004). “Steel beam-column connections using shape memory alloys.” J. Struct. Eng., 130(5), 732–740.
Otsuka, K., and Wayman, C. M. (2002). Shape memory material, Cambridge University Press, London.
Richart, F. A., Brandtzaeg, A., and Brow, R. L. (1928). “A study of the failure of concrete under combined compressive stress.”, Univ. of Illinois Engineering Experiment Station, Urbana IL.
Saiidi, M. S., and Wang, H. (2006). “Exploratory study of seismic response of concrete columns with shape memory alloys reinforcement.” ACI Struct. J., 103(3), 435–442.
Sharabash, A., and Andrawes, B. (2009). “Application of shape memory alloy dampers in the seismic control of cable-stayed bridges.” Eng. Struct., 31(2), 607–616.
Shin, M., and Andrawes, B. (2010). “Experimental investigation of actively confined concrete using shape memory alloys.” Eng. Struct., 32(3), 656–664.
Shin, M., and Andrawes, B. (2011). “Emergency repair of severely damaged reinforced concrete columns using active confinement with shape memory alloys.” Smart Mater. Struct., 20(6), 065018.
Siegert, W., Neuking, K., Mertmann, M., and Eggeler, G. (2003). “First cycle shape memory effect in the ternary NiTiNb system.” J. Phys. IV, 112(1), 739–742.
Wilde, K., Gardoni, P., and Fujino, Y. (2000). “Base isolation system with shape memory alloy device for elevated highway bridges.” Eng. Struct., 22(3), 222–229.
Information & Authors
Information
Published In
Copyright
© 2012 American Society of Civil Engineers.
History
Received: Aug 17, 2011
Accepted: Feb 1, 2012
Published online: Feb 3, 2012
Published in print: Oct 1, 2012
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.