Determination of and from IDT and Unconfined Compression Testing and Numerical Analysis
This article has been corrected.
VIEW CORRECTIONPublication: Journal of Materials in Civil Engineering
Volume 24, Issue 9
Abstract
This paper presents an alternative criterion (simplified method) to determine the cohesion () and internal angle of friction () properties for two granular materials lightly stabilized with slag lime and general blend (GB) cement–fly ash using indirect diametral tensile (IDT) strength and unconfined compressive strength (UCS). The and values of the stabilized materials obtained on the basis of this criterion were related to the IDT strength and UCS. The results suggest that the and can be estimated using this criterion and the can be accurately related to either the IDT strength or UCS for lightly cementitiously stabilized granular materials. However, the IDT strength is a better characteristic than the UCS to estimate the . To validate the criterion, the and obtained from the proposed criterion were input in the numerical analyses of IDT testing with Mohr-Coulomb failure criterion using FLAC2D finite difference software. The predicted tensile stress–horizontal diametrical deformation numerical results were compared with the corresponding experimental results. On the basis of this numerical analysis, the and parameters estimated from this method could predict the experimental results well in the elastic region but over-predicted the ultimate stress.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgements
The authors would like to thank Mr. David Sharp and Mr. Jim Baxter of SEIT, UNSW@ADFA for their technical assistance during the experimental work reported in this paper. The contribution of Blue Circle Southern Cement Pty Ltd for providing the binders is acknowledged and appreciated.
References
Arabani, M., and Veis Karami, M. (2006). “Geomechanical properties of lime stabilized clayey sands.” Arabian J. Sci. Eng., 32(1B), 15.
ASTM. (2005). “Standard test methods for liquid limit, plastic limit, and plasticity index of soils.” D4318-10, West Conshohcken, PA.
ASTM. (2007). “Test method for laboratory compaction characteristics of soil using standard effort ( ()).” D698-07e1, West Conshohocken, PA.
Basha, E. A., Hashim, R., Mahmud, H. B., and Muntohar, A. S. (2005). “Stabilization of residual soil with rice husk ash and cement.” Constr. Build. Mater., 19(6), 448–453.
Carneiro, F. L. L. B., and Barcellos, A. (1952). “Concrete tensile strength.” RILEM Bull., 13, 97–126.
Christensen, W. D., and Bonaquist, R. (2002). “Use of strength tests for evaluating the rut resistance of asphalt concrete.” J. Assoc. Asphalt Paving Technol., 71, 692–711.
Consoli, N. C., Montardo, J. P., Prietto, P. D. M., and Pasa, G. S. (2002). “Engineering behavior of a sand reinforced with plastic waste.” J. Geotech. and Geoenviron. Eng., 128(6), 462–472.
Gnanendran, C. T., and Piratheepan, J. (2008). “Characterization of a lightly stabilized granular material by indirect diametrical tensile testing.” Int. J. Pavement Eng., 9(6), 445–456.
Gnanendran, C. T., and Piratheepan, J. (2009). “Indirect diametrical tensile testing with internal displacement measurement and stiffness determination.” Geotech. Test. J., 32(1), 45–54.
Gnanendran, C. T., and Piratheepan, J. (2010). “Determination of fatigue life of a granular base material lightly stabilized with slag lime from indirect diametral tensile testing.” J. Trans. Eng., 136(8), 736–745.
Hondros, G. (1959). “The evaluation of poisson’s ratio and the modulus of materials of low tensile resistance by the brazilian (indirect tensile) test with particular reference to concrete.” Aust. J. Appl. Sci., 10(3), 243–268.
Ismail, M. A., Joer, H. A., Sim, W. H., and Randolph, M. F. (2002). “Effect of cement type on shear behavior of cemented calcareous soil.” J. Geotech. Geoenviron. Eng., 128(6), 520–529.
Kennedy, T. W., and Hudson, W. R. (1968). “Application of the indirect tensile test to stabilised materials.” Highway Research Record, Highway Research Board Washington, DC, 36–48.
Khattak, M. J., and Alrashidi, M. (2006). “Durability and mechanistic characteristics of fiber reinforced soil-cement mixtures.” Int. J. Pavement Eng., 7(1), 53–62.
Kolias, S., Kasselouri-Rigopoulou, V., and Karahalios, A. (2005a). “Stabilisation of clayey soils with high calcium fly ash and cement.” Cem. Concr. Compos., 27(2), 301–313.
Kolias, S., Kasselouri-Rigopoulou, V., and Karahalios, A. (2005b). “Stabilisation of clayey soils with high calcium fly ash and cement.” Cem. Concrete Composites, 27(2), 301–313.
Lim, S., and Zollinger, D. G. (2003). “Estimation of the compressive strength and modulus of elasticity of cement-treated aggregate base materials.” Transportation Research Record, Transportation Research Board, Washington, DC, 30–38.
Lo, S.-C. R., Lade, P. V., and Wardani, S. P. R. (2003). “An experimental study of the mechanics of two weakly cemented soils.” Geotech. Test. J., 26(3), 1–14.
Peethamparan, S., and Olek, J. (2008). “Study of the effectiveness of cement kiln dusts in stabilizing na-montmorillonite clay.” J. Mater. Civ. Eng., 20(2), 137–146.
Peethamparan, S., Olek, J., and Diamond, S. (2008). “Physicochemical behavior of cement kiln dust-treated kaolinite clay.” Transportation Research Board, Transportation Research Board, Washington, DC, 80–88.
Piratheepan, J., Gnanendran, C. T., and Lo, S.-C. R. (2010). “Characterization of cementitiously stabilised granular materials for pavement design using unconfined compression and IDT testings with internal displacement measurements.” J. Mater. in Civ. Eng., 22(5), 495–505.
Schmidt, R. J. (1972). “A practical method for measuring the resilient modulus of asphalt-treated mixes.” Highway Research Record, Highway Research Board, Washington, DC, 22–32.
Sobhan, K., and Mashnad, M. (2002). “Tensile strength and toughness of soil–cement–fly-ash composite reinforced with recycled high-density polyethylene strips.” J. Mater. Civ. Eng., 14(2), 177–184.
Vuttukuri, V. S., Lama, R. D., and Saluja, S. S. (1974). Handbook on mechanical properties of rocks, Vol. 1, Trans Tech., Clausthal, Germany.
White, G. (2006). “Laboratory characterization of cementitiously stabilized pavement materials.” M.Eng. thesis, Univ. of New South Wales at Australian Defence Force Academy, Australia.
Information & Authors
Information
Published In
Copyright
© 2012 American Society of Civil Engineers.
History
Received: May 13, 2011
Accepted: Jan 26, 2012
Published online: Jan 28, 2012
Published in print: Sep 1, 2012
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.