Influence of Polyvinyl Alcohol, Steel, and Hybrid Fibers on Fresh and Rheological Properties of Self-Consolidating Concrete
Publication: Journal of Materials in Civil Engineering
Volume 24, Issue 9
Abstract
Fiber-reinforced self-consolidating concrete (FRSCC) has a tremendous potential to be used in construction industry because it combines the advantages of both self-consolidating concrete (SCC) and fiber-reinforced concrete (FRC). Nineteen concrete mixtures are developed by incorporating different dosages (up to 0.5% volume or of concrete) of polyvinyl alcohol (PVA) and metallic fibers and their combinations. The influences of fiber types, size, dosages, and fiber combinations (used in hybrid mixes) on fresh (slump flow, L-box passing ability, V-funnel flow time, and segregation index—a measure of workability) and rheological (viscosity and yield stress at various time intervals ranging from 10 to 70 min) properties are critically analyzed on the basis of experimental results. The workability/rheological properties of concrete mixtures are found to depend on types, dosages, geometry of fiber, and in cases of hybrid mixtures, interaction and synergic properties between different fiber types also play a critical role. The maximum dosage of PVA is limited to 0.125% compared with 0.3% of metallic fibers in developed FRSCC mixtures because of PVA’s higher workability reduction/viscosity increase capability. In addition, relationships among fresh/workability and rheological properties are also established.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors acknowledge the financial support of the National Science and Engineering Research Council (NSERC) of Canada. The authors would also like to thank the technical staffs of the Ryerson University Civil Engineering Department for providing support and assistance during the experimental program.
References
American Concrete Institute (ACI). (2007). “Self-consolidating concrete.”, Farmington Hills, MI.
ACI Committee 544. (1984). “State-of-the-art report on fiber reinforced concrete.”, Detroit.
ASTM. (2006). “Standard test method for sieve analysis of fine and coarse aggregate.”, Annual Book of ASTM Standards, West Conshohocken, PA.
ASTM. (2010). “Standard specification for chemical admixtures for concrete.”, Annual Book of ASTM Standards, West Conshohocken, PA.
Aydin, A. C. (2007). “Self compactability of high volume hybrid fiber reinforced concrete.” Constr. Build. Mater., 21(6), 1149–1154.
Barragan, B., Gettu, R., De La Cruz, C., Bravo, M., and Zerbino, R. (2005). “Development and application of fiber-reinforced self-compacting concrete.” Proc., Int. Conf. on Young Researchers’ Forum, Thomas Telford, London, 165–172.
Beaudoin, J. J. (1990). Handbook of fiber-reinforced concrete: Principles, properties, developments and applications, Vol. 17, Noyes Publications, Park Ridge, NJ.
Bui, V. K., Akkaya, Y., and Shah, S. P. (2002). “Rheological model for self-consolidating concrete.” ACI Mater. J., 99(6), 549–559.
Canadian Standards Association (CSA). (2008). “Cementitious materials for use in concrete.”, Rexdale, Ontario, Canada.
Corinaldesi, V., and Moriconi, G. (2004). “Durable fiber reinforced self-compacting concrete.” Cem. Concr. Res., 34(2), 249–254.
Ding, Y., Liu, S., Zhang, Y., and Thomas, A. (2008). “The investigation on the workability of fiber cocktail reinforced self-compacting high performance concrete.” Constr. Build. Mater., 22(7), 1462–1470.
Ferrara, L., Park, Y. D., and Shah, S. P. (2007). “A method for mix-design of fiber-reinforced self-compacting concrete.” Cem. Concr. Res, 37(6), 957–971.
Grünewald, S., and Walraven, J. C. (2001). “Parameter-study on the influence of steel fibers and coarse aggregate content on the fresh properties of self-compacting concrete.” Cem. Concr. Res., 31(12), 1793–1798.
Khayat, K. H., and Roussel, Y. (2000). “Testing and performance of fiber-reinforced self consolidating concrete.” Mater. Struct. J., 33(6), 391–397.
Lachemi, M., Hossain, K. M. A., Lambros, V., and Bouzoubaâ, N. (2003). “Development of cost-effective self-consolidating concrete incorporating fly ash, slag cement, or viscosity-modifying admixtures.” ACI Mater. J., 100(5), 419–425.
Lachemi, M., Hossain, K. M. A., Lambros, V., and Bouzoubaâ, N. (2004). “Self-compacting concrete incorporating new viscosity modifying admixtures.” Cem. Concr. Res., 34(6), 917–926.
Liu, X., Ye, G., De Schutter, G., Yuan, Y., and Taerwe, L. (2008). “On the mechanism of polypropylene fibers in preventing fire spalling in self-compacting and high-performance cement paste.” Cem. Concr. Res., 38(4), 487–499.
Malhotra, V. M., Garette, G. G., and Bilodeau, A. (1994). “Mechanical properties and durability of polypropylene fiber reinforced high-volume fly ash concrete for shotcrete applications.” ACI Mater. J., 91(5), 478–486.
Mazaheripour, H., Ghanbarpour, S., Mirmoradi, S. H., and Hosseinpour, I. (2011). “The effect of polypropylene fibers on the properties of fresh and hardened lightweight self-compacting concrete.” Constr. Build. Mater., 25(1), 351–358.
Miao, C., Mu, R., Tian, Q., and Sun, W. (2002). “Effect of sulfate solution on the frost resistance of concrete with and without steel fiber reinforcement.” Cem. Concr. Res., 32(1), 31–34.
Nanni, A. (1988). “Splitting-tension test for fiber reinforced concrete.” ACI Mater. J., 85(4), 229–233.
Nehdi, M., and Ladanchuk, J. D. (2004). “Fiber synergy in fiber-reinforced self-consolidating concrete.” ACI Mater. J., 101(6), 508–517.
Nielsson, I., and Wallevik, O. H. (2003). “Rheological evaluation of some empirical test methods, preliminary results.” Proc., 3rd Int. Symp. of Self-Compacting Concrete, Wallevik, O. H., and Nielsson, I., eds, RILEM Publications SARL, Bagneux, France, 59–68.
Ozawa, K., Maekawa, K., Kunishima, H., and Okamura, H. (1989). “Performance of concrete based on the durability design of concrete structures.” Proc., 2nd East-Asia-Pacific Conf. on Structural Engineering and Construction, Vol. 1, Bangkok, Thailand, 445–456.
Ozyurt, N., Mason, T. O., and Shah, S. P. (2007). “Correlation of fiber dispersion, rheology and mechanical performance of FRCs.” Cem. Concr. Compos., 29(2), 70–79.
Precast/Prestressed Concrete Institute. (2003). “Interim guidelines for the use of self-consolidating concrete in Precast/Prestressed Concrete Institute member plants.” TR-6-03, Chicago. 〈www.pci.org〉 (Feb. 17, 2011).
Rols, S., Ambroise, J., and Pera, J. (1999). “Effects of different viscosity agents on the properties of self-leveling concrete.” Cem. Concr. Res., 29(2), 261–266.
Sahmaran, M., Yurtseven, A., and Ozgur, Y. I. (2005). “Workability of hybrid fiber reinforced self-compacting concrete.” Build. Environ., 40(12), 1672–1677.
Saint-Gobain SEVA. (2008). “FibraFlex activity.” Chalon-sur-Saône, France. 〈www.fibraflex.com〉 (Feb. 11, 2011).
Self-Compacting Concrete European Project Group. (2005). The European guidelines for self-compacting concrete: Specification, production and use, European Federation of Specialist Construction Chemicals and Concrete Systems (EFNARC), Farnham, Surrey, UK.
Tlemat, H., Pilakoutas, K., and Neocleous, K. (2003). “Pullout behaviour of steel fibers recycled from used tyres.” Role of concrete in sustainable development, Proc., Int. Symp. on Celebrating Concrete: People and Practice, Thomas Telford, London, 175–184.
Torrijos, M. C., Barragán, B. E., and Zerbino, R. L. (2008). “Physical–mechanical properties, and mesostructure of plain and fiber reinforced self-compacting concrete.” Constr. Build. Mater., 22(8), 1780–1788.
Wallevik, J. E. (2003). “Rheology of particle suspensions—fresh concrete, mortar and cement paste with various types of lignosulfonates.” Ph.D. thesis, Dept. of Structural Engineering, The Norwegian Univ. of Science and Technology, Trondheim, Norway.
Information & Authors
Information
Published In
Copyright
© 2012 American Society of Civil Engineers.
History
Received: Sep 6, 2011
Accepted: Jan 26, 2012
Published online: Jan 28, 2012
Published in print: Sep 1, 2012
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.