Complex Stiffness Gradient Estimation of Field-Aged Asphalt Concrete Layers Using the Direct Tension Test
Publication: Journal of Materials in Civil Engineering
Volume 24, Issue 7
Abstract
The characterization of viscoelastic properties of the aged field asphalt mixtures has been a challenge for pavement engineers. Instead of characterizing full mixtures from the field cores, only the binder was extracted from the mixture and was evaluated for its aging properties. Because the binder is only one component of the mixture, the properties of the aged binder may not clearly indicate the properties of the aged field mixtures. This study presents a novel method to calculate the complex stiffness gradient of a field-aged specimen using a direct tension test. Because the field asphalt mixtures are not aged uniformly with the pavement depth, there is a modulus gradient through the thickness of the asphalt layer. The asphalt mixture is stiffer at the surface. As a result, rectangular specimens cut from field cores when tested in a direct tension test in electrohydraulic servo machines with feedback frequency tend to oscillate. An analytical method has been developed to analyze the oscillating behavior of the specimen and to produce the stiffness gradient function as it varies with loading frequency and position relative to the pavement surface. Furthermore, a finite-element simulation of the test is conducted to verify the validity and robustness of the proposed method. This method was successfully used to characterize aged viscoelastic properties of field cores obtained from different roads in Texas.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors gratefully acknowledge receiving the aged sample data from the Texas Department of Transportation and Texas Transportation Institute project 0-6009. The data were provided by Dr. Charles J. Glover, Chemical Engineering Department, and Dr. Amy Epps-Martin, Zachry Civil Engineering Department, Texas A&M University, College Station, TX.
Any opinions expressed in this paper are those of the authors and do not necessarily reflect the views of the sponsors and those who provided the data.
References
ABAQUS [Computer software]. Dassault Systèmes, Vélizy-Villacoublay, France.
Bari, J., et al. (2006). “Development of a new revised version of the Witczak predictive model for hot mix asphalt mixtures.” Proc., Technical Sessions 2006 Annual Meeting, Association of Asphalt Paving Technologists, Lino Lakes, MN, 381–424.
Bhattacharjee, S., Swamy, A., and Daniel, J. (2009). “Application of elastic-viscoelastic correspondence principle to determine fatigue endurance limit of hot-mix asphalt.” Transportation Research Record 2126, Transportation Research Board, Washington, DC, 12–18.
Christensen, D. W. Jr., Pellinen, T., and Bonaquist, R. F. (2003). “Hirsch model for estimating the modulus of asphalt concrete.” Proc., Asphalt Paving Technology 2003, Association of Asphalt Paving Technologists, Lino Lakes, MN, 97–121.
Dongre, R., et al. (2005). “Field evaluation of Witczak and Hirsch models for predicting dynamic modulus of hot-mix asphalt.” Proc., 2005 Meeting of the Association of Asphalt Paving Technologists, Association of Asphalt Paving Technologists, Lino Lakes, MN, 381–442.
Farrar, J. M., Harnsberger, P. M., and Kenneth, P. T. (2006). “Evaluation of oxidation in asphalt pavement test sections after four years of service.” Int. Conf. on Perpetual Pavement, Ohio Research Institute for Transportation and the Environment, Ohio University, Athens, OH, 1–17.
Hanson, D. I., King, G., Buncher, M., Duval, J., Blankenship, P., and Anderson, M. (2009). Techniques for prevention and remediation of non-load related distresses on HMA airport pavements (phase 1), Project 05-07, Airfield Asphalt Pavement Technology Program, Auburn Univ., Auburn, AL, 1–123.
Huang, S.-C., and Grimes, W. (2010). “Influence of aging temperature on rheological and chemical properties of asphalt binders.” Transportation Research Record 2179, Transportation Research Board, Washington, DC, 39–48.
Huang, S.-C., Tia, M., and Ruth, B. E. (1996). “Laboratory aging methods for simulation of field aging of asphalts.” J. Mater. Civ. Eng.JMCEE7, 8(3), 141–152.
Lee, S.-J., Amirkhanian, S. N., and Kim, K. W. (2009). “Laboratory evaluation of the effects of short-term oven aging on asphalt binders in asphalt mixtures using HP-GPC.” Constr. Build. Mater.CBUMEZ, 23(9), 3087–3093.
Lee, S.-J., Kim, H., Akisetty, C. K., and Amirkhanian, S. N. (2008). “Laboratory characterization of recycled crumb-rubber-modified asphalt mixture after extended aging.” Can. J. Civ. Eng.CJCEB8, 35(11), 1308–1317.
Leiva, F., and West, R. C. (2008). “Relationships between laboratory measured characteristics of HMA and field compactability.” Proc., 2008 Annual Meeting of the Association of Asphalt Paving Technologists, Association of Asphalt Paving Technologists, Lino Lakes, MN, 183–219.
Li, P.-L., Zhang, Z.-Q., Wang, B.-G., and Ding, Z. (2008). “Experimental research on thermo-oxidative aging for simulation of pavement asphalt aging.” J. Zhengzhou Univ. Eng. Sci.ZDXGAN, 29, 119–123.
Luo, R., and Lytton, R. L. (2010). “Characterization of the tensile viscoelastic properties of an undamaged asphalt mixture.” J. Transp. Eng.JTPEDI, 136(3), 173–180.
Memon, G. M., and Chollar, B. H. (1996). “Laboratory simulation of oxidative aging of asphalt.” Proc., 1996 Symp. on Oxidative Behavior of Materials by Thermal Analytical Techniques, ASTM, West Conshohocken, PA, 138–148.
Molenaar, A. A. A., Hagos, E. T., and van de Ven, M. F. C. (2010). “Effects of aging on the mechanical characteristics of bituminous binders in pac.” J. Mater. Civ. Eng.JMCEE7, 22(8), 779–787.
Mukherjee, S., and Paulino, G. H. (2003). “The elastic-viscoelastic correspondence principle for functionally graded materials, revisited.” J. Appl. Mech., 70(3), 359–363.
National Cooperative Highway Research Program (NCHRP). (2004). “Part 3.6—30.” Guide for mechanistic-empirical design of new and rehabilitated pavement structures, NCHRP 1-37A, Final Rep., Washington, DC.
Nazarian, S., and Alvarado, G. (2006). “Impact of temperature gradient on modulus of asphaltic concrete layers.” J. Mater. Civ. Eng.JMCEE7, 18(4), 492–499.
Park, S. W., Kim, Y. R., and Schapery, R. A. (1996). “Viscoelastic continuum damage model and its application to uniaxial behavior of asphalt concrete.” Mech. Mater.MSMSD3, 24(4), 241–255.
Raad, L., Saboundjian, S., and Minassian, G. (2001). “Field aging effects on fatigue of asphalt concrete and asphalt-rubber concrete.” Transportation Research Record 1767, Transportation Research Board, Washington, DC, 126–134.
Tian, X., Zheng, J.-L., and Zhang, Q. (2004). “Effect of aging on viscoelastic performance of asphalt binder.” 23rd Annual Southern African Transport Conf.: Getting Recognition for the Importance of Transport, 226–232.
Wagoner, M. P., Buttlar, W. G., Paulino, G. H., and Blankenship, P. (2005). “Investigation of the fracture resistance of hot-mix asphalt concrete using a disk-shaped compact tension test.” Transportation Research Record 1929, Transportation Research Board, Washington, DC, 183–192.
Woo, W. J., Chowdhury, A., and Glover, C. J. (2008). “Field aging of unmodified asphalt binder in three texas long-term performance pavements.” Transportation Research Record 2051, Transportation Research Board, Washington, DC, 15–22.
Information & Authors
Information
Published In
Copyright
© 2012. American Society of Civil Engineers.
History
Received: Apr 14, 2011
Accepted: Dec 20, 2011
Published online: Dec 23, 2011
Published in print: Jul 1, 2012
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.