Estimation of Elasticity Modulus of a Prototype Arch Dam Using Experimental Methods
Publication: Journal of Materials in Civil Engineering
Volume 24, Issue 4
Abstract
Using experimental methods, this study presents the estimation of the dynamic and static (secant) elasticity modules of a prototype arch dam. These experimental methods are ambient vibration tests, uniaxial compression tests, and ultrasonic velocity tests. Implementation of the methods on a prototypical arch dam–reservoir–foundation model of the dam, constructed under laboratory conditions, allows estimation of the elasticity modules. Random impact loads excite the arch dam during ambient vibration testing, which creates response signals for measurement. Commercially available software transfers the signals, and processing those signals allows estimation of the experimental natural frequencies of the arch dam. Analysis of a three-dimensional (3D) finite element model (FEM) of the arch dam determines natural frequencies. The estimation of the elasticity modules of the arch dam arises from a comparison of the experimental and analytical frequencies. The uniaxial compression tests use several specimens of the fresh and hardened concrete of the prototype model, and those tests provide the compressive strengths and stress-strain relationships. The ultrasonic velocity tests apply several velocity measurements to the arch dam and foundation, resulting in estimation of the elasticity modulus from empirical equations related to concrete mix design, compressive strength, and velocity values. This study discusses the difficulties of the determination of the elasticity modulus and suggests that ambient vibration testing and the finite element method are useful for overcoming these difficulties.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The Scientific and Technological Research Council of Turkey (TUBITAK) and Karadeniz Technical University (KTU) supported this research through Research Grant Nos. 106M038, 2006.112.001.1, and 2005.112.001.1, respectively. The authors thank KTU Hydraulic Laboratory’s staff members for their assistance.
References
American Concrete Institute (ACI). (1993). “State-of-the-art report on high-strength concrete.” ACI manuals of concrete practice, ACI 363 R-84, Detroit, MI.
ANSYS. (2008). ANSYS, Canonsburg, PA.
Arıoğlu, E., and Arıoğlu, N. (2005). Concrete specimen tests and evaluation, Evrim Publishing, İstanbul, Turkey (in Turkish).
Barlett, F. M., and MacGregor, J. G. (1994). “Effect of moisture condition on concrete core strengths.” ACI Mater. J., 91(3), 227–236.AMAJEF
Bayraktar, A., Sevim, B., Altunışık, A.C., Adanur, S., and Akköse, M. (2009). “Experimental and analytical modal analyses of a prototype arch dam-reservoir-foundation model.” Int. Earthquake Symposium Kocaeli 2009, Kocaeli Univ., Kocaeli, Turkey.
Bendat, J. S., and Piersol, A. G. (2004). Random data: Analysis and measurement procedures, John Wiley and Sons, New York.
Brincker, R., Ventura, C., and Andersen, P. (2003). “Why output-only modal testing is a desirable tool for a wide range of practical applications.” Proc., 21st Int. Modal Analysis Conf. (IMAC), Kissimmee, FL.
British Standards Institution (BSI). (1986). “Testing concrete, part 203: Recommendations for measurements of velocity of ultrasonic pulses in concrete.” BS 1881, London.
Brincker, R., Zhang, L., and Andersen, P. (2000). “Modal identification from ambient responses using frequency domain decomposition.” 18th Int. Modal Analysis Conf., San Antonio.
British Standards Institution (BSI). (1972). “Code of practice for the structural use of concrete.” CP 110, London.
Dennis, T. L., et al. (1968). “Arch dams: A review of British research and development.” Proc. of the Symposium Held at the Institution of Civil Engineers, Institution of Civil Engineers, London.
Doğangün, A. (2007). Design of reinforced concrete, Birsen Publishing, İstanbul, Turkey, (in Turkish).
Eibl, J. (1995). Concrete structures, Euro design handbook, 5Ernst and Sohn Publishing, Kalsruhe, Germany.
Ersoy, U., and Özcebece, G. (2001). Concrete, Evrim Publishing, İstanbul, Turkey, (in Turkish).
Ewins, D.J. (1984). “Modal Testing: Theory and Practice.” Research Studies Press Ltd, England.
Institute of Turkish Standards. (2000). “Requirements for design and construction of reinforced concrete structures.” TS 500, Ankara, Turkey (in Turkish).
Lamond, J. F., and Pielert, J.H. (2006). “Significance of test and properties of concrete and concrete-making materials.” ASTM, STP169D.
Martinez y Cabrera, F., and Pozzo, E. (1992). “Experimental control of deformability of short-term loadings in testing large-span prestressed structures.” Mater. Struct., 25(4), 231–238.
Mehta, P. K. (1986). Concrete: Structure, Properties, and Materials, Prentice Hall, Englewood Cliffs, NJ, USA.
Neville, G. B. (1984). “Notes on ACI 318-83, building code requirements for reinforced concrete, with design applications.” Portland Cement Association, Skokie, IL.
OMA. (2006). Operational modal analysis, release 4.0., Structural Vibration Solutions A/S, Aalborg, Denmark.
PULSE. (2006). Analyzers and Solutions, Release 11.2, Brüel and Kjær, Sound and Vibration Measurement A/S, Nærum, Denmark.
Sevim, B., Bayraktar, A., Altunışık, A. C., Adanur, S., and Akköse, M. (2010). “Modal parameter identification of a prototype arch dam using enhanced frequency domain decomposition and stochastic subspace identification techniques.” J. Test. Eval., 38(5), 588–597.JTEVAB
Sevim, B., Bayraktar, A., Altunışık, A. C., Adanur, S., and Akköse, M. (2012). “Determination of water level effects on the dynamic characteristics of a prototype arch dam model using ambient vibration testing.” Exp. Tech., 36(1), 72–82, (Nov. 29, 2010).
Shah, S. P., Lange, A. D., Li, Z., and Mitsui, K. (1994). “Relationship between microstructure and mechanical properties of the paste-aggregate interface.” ACI Mater. J., 91(1), 30–39.JACIAX
Topçu, İ. B., and Uğurlu, A. (2007). “Elasticity theory of concrete and prediction of static e-modulus for dam concrete using composite models.” Teknik Dergi, 18, 4055–4067.
Institute of Turkish Standards. (1981). “Test method for static modulus of elasticity and Poisson's ratio of concrete in compression.” TS 3502, Ankara, Turkey (in Turkish).
United States Army Corps of Engineers (USACE). (2003). “Time-history dynamic analysis of concrete hydraulic structures.” Engineering and Design, Washington, DC.
Information & Authors
Information
Published In
Copyright
© 2012. American Society of Civil Engineers.
History
Received: Sep 5, 2009
Accepted: Jul 1, 2011
Published online: Sep 17, 2011
Published in print: Apr 1, 2012
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.