Energy-Efficient Approach to Cold-Weather Concreting
Publication: Journal of Materials in Civil Engineering
Volume 23, Issue 11
Abstract
Conventional cold-weather concreting is expensive and very energy inefficient. Common practice requires artificial heating of the raw materials and the surrounding environment to create suitable curing conditions for normal concrete. Antifreeze concrete is a new approach to cold-weather concreting without the need for artificial heating. This saves time, money, and energy. The antifreeze concrete technology has been proven in numerous full-scale field demonstrations and is compatible with current concrete construction practices. A laboratory study established the practicality of using antifreeze concrete and developed the tools to mix and cure concrete in subfreezing temperatures. Eight candidate antifreeze formulations were developed in the laboratory and subjected to initial screening tests that showed they were capable of being workable, entraining air, and meeting the design freezing point. Performance testing showed that the strength gain when cured at is as good as conventional concrete cured at and that antifreeze mixtures can be made durable. High dosages of chemical admixture used in antifreeze concrete mixtures were not harmful to the concrete. It is recommended that agencies conduct testing on their own to become familiar with the antifreeze mixtures before widespread use.
Get full access to this article
View all available purchase options and get full access to this article.
References
Alexiades, V., and Solomon, A. D. (1993). Mathematical modeling of melting and freezing processes, Hemisphere, Washington.
American Concrete Institute (ACI). (1988). “Cold weather concreting.” ACI 306-R88, Detroit.
American Concrete Institute (ACI). (1991). “Standard practice for selecting proportions for normal, heavyweight, and mass concrete.” ACI 211.1, Detroit.
“Antifreeze for your concrete.” (1991). Civ. Eng., 61(12), 10.
ASTM. (1994). “Standard test method for air content of freshly mixed concrete by the volumetric method.” C173, West Conshohocken, PA
ASTM. (1997). “Standard test method for resistance of concrete to rapid freezing and thawing.” C666, West Conshohocken, PA
ASTM. (1998a). “Standard practice for estimating concrete strength by the maturity method.” C1074, West Conshohocken, PA
ASTM. (1998b). “Standard test method for microscopical determination of parameters of the air-void system in hardened concrete.” C457, West Conshohocken, PA
ASTM. (1999). “Standard specification for chemical admixtures for concrete.” C494, West Conshohocken, PA
ASTM. (2000). “Standard test method for slump of hydraulic-cement concrete.” C143, West Conshohocken, PA
ASTM. (2001a). “Standard specification for air-entraining admixtures for concrete.” C260, West Conshohocken, PA
ASTM. (2001b). “Standard test method for compressive strength of cylindrical concrete specimens.” C39, West Conshohocken, PA
ASTM. (2002a). “Standard specification for concrete aggregates.” C33, West Conshohocken, PA
ASTM. (2002b). “Standard specification for portland cement.” C150, West Conshohocken, PA
ASTM. (2002c). “Standard test method for fundamental transverse, longitudinal, and torsional frequencies of concrete specimens.” C215, West Conshohocken, PA
Barna, L. A., Seman, P. M., and Korhonen, C. J. (2010). “Cold weather admixture systems demonstration at Fort Wainwright, Alaska.” ERDC/CRREL Technical Rep. 10-6, USAERDC Cold Regions Research and Engineering Laboratory, Hanover, NH.
Korhonen, C. J. (2002). “Off-the-shelf antifreeze admixtures.” ERDC/CRREL TR-02-7, USAERDC Cold Regions Research and Engineering Laboratory, Hanover, NH.
Korhonen, C. J. (2006). “Extending the season for concrete construction and repair, Phase II—Defining engineering parameters.” ERDC/CRREL TR-06-8, USAERDC Cold Regions Research and Engineering Laboratory, Hanover, NH.
Korhonen, C. J., Cortez, E. R., Durning, T. A., and Jeknavorian, A. A. (1997). “Antifreeze admixtures for concrete.” Special Rep. 97-26, U.S. Army Cold Regions Research and Engineering Laboratory, Hanover, NH.
Korhonen, C. J., and Orchino, S. A. (1999). “Effects of low temperatures on concrete strength.” Proc., 10th Int. Cold Regions Engineering Specialty Conf.: Putting research into practice, ASCE, Reston, VA, 16–19.
Korhonen, C. J., Semen, P. M., and Barna, L. A. (2004). “Extending the season for concrete construction and repair, Phase I—Establishing the technology.” TR-04-2, USAERDC Cold Regions Research and Engineering Laboratory, Hanover, NH.
U.S. Air Force. (2005). “Use of off-the-shelf concrete admixture as cold weather admixture systems (CWAS).” Engineering Technical Letter 05-8, Headquarters Air Force Civil Engineer Support Agency, Tyndall Air Force Base, FL.
Information & Authors
Information
Published In
Copyright
© 2011 American Society of Civil Engineers.
History
Received: Jul 16, 2010
Accepted: Dec 27, 2010
Published online: Oct 14, 2011
Published in print: Nov 1, 2011
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.