Sustainable Earthen and Straw Bale Construction in North American Buildings: Codes and Practice
Publication: Journal of Materials in Civil Engineering
Volume 23, Issue 6
Abstract
The building industry accounts for up to 40% of the earth’s energy usage from material extraction through building operation; housing constitutes roughly 30% of energy use in North America. Owners and consumers are looking for more efficient building systems that would decrease this use of energy. The material chosen to construct the structure of a building has the potential to reduce the building’s initial environmental impact and its life cycle energy use. However, this is rarely considered during conceptual design. Sustainable construction materials that have low embodied energy include earthen construction and straw bale construction. However, these materials are not widely accepted alternatives in North America because they are included only in select building codes in North America and around the world. In this paper, an extensive review of the current construction practice of sustainable construction materials is summarized. Durability concerns and limitations of the methods of construction are discussed, and areas of future research are identified.
Get full access to this article
View all available purchase options and get full access to this article.
References
ASTM. (2005). “Standard guide for earthen wall building systems.” ASTM E2392, West Conshohoken, PA.
Austin. (1997). “Straw bale construction.” Chapter 36, Austin City Code, Vol. II, Austin, TX.
Binici, H., Aksogan, O., Bodur, M. N., Akca, E., and Kapur, S. (2007). “Thermal isolation and mechanical properties of fibre reinforced mud bricks as wall materials.” Constr. Build. Mater., 21(4), 901–906.
Bouhicha, M., Aouissi, F., and Kenai, S. (2005). “Performance of composite soil reinforced with barley straw.” Cem. Concr. Compos., 27(5), 617–621.
California Department of General Services. (2009). “Health and safety code section 18944.30-18944.40.” California Building Standards Code.
Center for the Development of Enterprise (CDE). (2000). “Compressed earth blocks: Testing procedures.” Ecole Nationale des Travaux Publics de l’Etat and The Center for the Research and Application of Earth Architecture, Brussels, Belgium, and Grenoble, France.
Commission of Public Records. (2008a). “2006 New Mexico earthen building materials code.” New Mexico Administrative Code, Santa Fe, NM.
Commission of Public Records. (2008b). “2006 New Mexico Non-Load Bearing Baled Straw Construction Building Standards.” New Mexico Administrative Code, Santa Fe, NM.
Fitzmaurice, R. (1958). Manual on stabilized soil construction for housing, United Nations, New York.
Gonzalez, H. J. (2002). “Energy use in straw bale houses.” 〈http://www.cmhc-schl.gc.ca/odpub/pdf/62892.pdf?fr=1263853902780〉 (Jun. 18, 2009).
Henderson, K. (2007). “Achieving legitimacy: Visual discourses in engineering design and green building code development.” Build. Res. Inf., 35(1), 6.
International Code Council (ICC). (2006). International building code, Washington, DC.
Kadam, K. (2000). “Rice straw as a lignocellulosic resource: Collection, processing, transportation, and environmental aspects.” Biomass Bioenergy, 18, 369–389.
King, B. (2003). “Load-bearing straw bale construction: A summary of worldwide testing and experience.” Ecological building network 〈http://www.ecobuildnetwork.org/strawbale.htm〉 (Oct. 20, 2008).
King, B., et al. (2006). Design of straw bale buildings, Green Building Press, San Rafael, CA.
Lawrence, M. (2009). “Determining moisture levels in straw bale construction.” Constr. Build. Mater., 23, 2763–2768.
Lippiatt, B. (1999). “Selecting cost-effective green building products: BEES approach.” J. Constr. Eng. Manage., 125(6), 448.
Meadows, D. (2004). “ASTM international and sustainable development keeping pace with a new global market.” Standardization News, 32(4), 30.
Morel, J. C., et al. (2007). “Compressive strength testing of compressed earth blocks.” Constr. Build. Mater., 21, 303–309.
Pierquet, P., Bowyer, J. L., and Huelman, P. (1998). “Thermal performance and embodied energy of cold climate wall systems.” For. Prod. J., 48(6), 53–60.
Pima County Development Services. (2007a). “Appendix M: Straw bale structures.” 2006 International Building Code Amendments, Tucson, AZ.
Pima County Development Services. (2007b). “Section 2114: Earthen structures.” 2006 International Building Code Amendments, Tucson, AZ.
Pulselli, R. M. (2007). “Energy analysis of building manufacturing, maintenance and use: Em-building indices to evaluate housing sustainability.” Energy Build., 39(5), 620.
Shukla, A. (2009). “Embodied energy analysis of adobe house.” Renewable Energy, 34(3), 755.
Standards New Zealand. (1998a). “Earth buildings not requiring specific design.” NZS 4299, Wellington, New Zealand.
Standards New Zealand. (1998b). “Engineering design of earth buildings.” NZS 4297, Wellington, New Zealand.
Standards New Zealand. (1998c). “Materials and workmanship for earth buildings.” NZS 4298, Wellington, New Zealand.
Stern, N. H. (2007). The economics of climate change: The stern review, Cambridge University Press, Cambridge, UK.
Straube, J. (2000a). “Moisture properties of plaster and stucco for strawbale buildings.” Research Rep. for Canada Mortgage and Housing Corporation, Building Engineering Group, Univ. of Waterloo, Waterloo, Ontario, Canada, 17.
Straube, J. (2000b). “Moisture properties of plaster and stucco for strawbale buildings.” 〈http://www.ecobuildnetwork.org/pdfs/Straube_Moisture_Tests.pdf〉 (Sep. 5, 2009).
Vargas, J., Blondet, M., and Tarque, N. (2006). “Building codes for earthen buildings in seismic areas: The Peruvian experience.” 8th U.S. National Conf. on Earthquake Engineering, San Francisco.
Venkatarama Reddy, B. V., and Jagadish, K. S. (2003). “Embodied energy of common and alternative building materials and technologies.” Energy Build., 35(2), 129–137.
Walker, P. (2002). The Australian earth building handbook, Standards Australia International, Sydney, Australia.
Webster, M. D. (2005). “The relevance of structural engineers to green building design.” Proc., Metropolis and Beyond, ASCE, New York, 60.
Zhang, Z., Wu, X., Yang, X., and Zhu, Y. (2006). “BEPAS—a life cycle building environmental performance assessment model.” Build. Environ., 41(5), 669–675.
Information & Authors
Information
Published In
Journal of Materials in Civil Engineering
Volume 23 • Issue 6 • June 2011
Pages: 866 - 872
Copyright
© 2011 American Society of Civil Engineers.
History
Received: May 26, 2010
Accepted: Nov 27, 2010
Published online: May 16, 2011
Published in print: Jun 1, 2011
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.