Swell Mitigation with Granulated Tire Rubber
Publication: Journal of Materials in Civil Engineering
Volume 23, Issue 5
Abstract
Experiments were conducted to investigate the odometric swell behavior of expansive soil specimens mixed independently with two different granular additives: silica sand and granulated tire rubber (GTR). All specimens were prepared with the same global water content. However, specimens that contained sand swelled less than did analogous specimens that contained GTR, regardless of the surcharge stress imposed before inundation. Phase relationship analyses based on “oversize correction” equations derived for mixtures with three solid phases indicate that the specimens possessed clay portions with different dry density and initial water content. Such differences are attributed mainly to the role of additive grain stiffness during specimen preparation. Results from complementary discrete element method simulations indicate that the stiffness of the additive grains may also play a role in mitigating the swell via contact force alterations upon swell.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This research project was sponsored in part by the National Science Foundation and the San Diego State University Research Foundation. The writers acknowledge the participation of Reza Mortezaie in the preliminary stages of the project.
References
ASTM. (2007a). “Standard practice for correction of unit weight and water content for soils containing oversize particles.” D4718-87, West Conshohocken, PA.
ASTM. (2007b). “Standard test methods for laboratory compaction characteristics of soil using standard effort (12 400 ()).” D698-07e1, West Conshohocken, PA.
ASTM. (2008). “Standard test methods for one-dimensional swell or settlement potential of cohesive soils.” D4546-08, West Conshohocken, PA.
Bathurst, R. J., and Rothenburg, L. (1990). “Observation on stress-force-fabric relationships in idealized granular materials.” Mech. Mater., 9(1), 65–80.
Bosscher, P. J., Edil, T. B., Kuraoka, S., (1997). “Design of highway embankments using tire chips.” J. Geotech. Geoenviron. Eng., 123, 295–304.
Christoffersen, J., Mehrabadi, M. M., and Nemat-Nasser, S. (1981). “A micromechanical description of granular material behaviour.” J. Appl. Mech., 48(2), 339.
Edil, T. B. (2008). “A review of environmental impacts and environmental applications of shredded scrap tires.” Proc. of the Int. Workshop on Scrap Tire Derived Geomaterials—Opportunities and Challenges, Taylor and Francis/Balkema, Leiden, The Netherlands, 3–18.
Edil, T. B., and Bosscher, P. J. (1994). “Engineering properties of tire chips and soil mixtures.” Geotech. Test. J., 17(4), 453–464.
Edil, T. B., Park, J. K., and Kim, J. Y. (2004). “Effectiveness of scrap tire chips as sorptive drainage material.” J. Environ. Eng., 130(7), 824–831.
Einav, I., Dyskin, A., and Sukumaran, B. (2006). “Intermediate scales in granular matter.” Proc. of Geomechanics and Geotechnics of Particulate Media, Taylor and Francis/Balkema, Leiden, The Netherlands, 157–160.
Feng, Z. Y., and Sutter, K. G. (2000). “Dynamic properties of granulated rubber/sand mixtures.” Geotech. Test. J., 23(3), 338–344.
Heimdahl, C., and Drescher, A. (1999). “Elastic anisotropy of tire shreds.” J. Geotech. Geoenviron. Eng., 125(5), 383–389.
Holtz, W. G., and Gibbs, H. J. (1956). “Engineering properties of expansive clays.” Trans. ASCE, 121, 641–677.
Hudyma, N. B., and Avar, B. (2006). “Changes in swell behavior of expansive soils from dilution with sand.” Environ. Eng. Geosci., 12(2), 137–145.
Humphrey, D. N., and Sandford, T. C. (1993). “Tire chips as lightweight sub-grade fill and retaining wall backfill.” Proc. of the Symp. on Recovery and Effective Reuse of Discarded Materials and By-Products for Construction of Highway Facilities, Federal Highway Administration, Denver, 5.87–5.99.
Lee, J. H., Salgado, R., Bernal, A., and Lovell, C. W. (1999). “Shredded tires and rubber-sand as lightweight backfill.” J. Geotech. Geoenviron. Eng., 125(2), 132–141.
Lee, J. S., Guimaraes, M., and Santamarina, J. C. (2007). “Micaceous sands: microscale mechanisms and macroscale response.” J. Geotech. Geoenviron. Eng., 133(9), 1136–1143.
Liu, H. S., Mead, J. L., and Stacer, R. G. (2000). “Environmental effects of recycled rubber in light-fill applications.” Rubber Chem. Technol., 73(3), 551–564.
Noorany, I., and Houston, S. (1995). “Effect of oversize particles on swell and compression of compacted unsaturated soils.” Proc., Static and Dynamic Properties of Gravelly Soils, Geotechnical Special Publication No. 56, ASCE, Reston, VA, 107–121.
Noorany, I., and Stanley, V. J. (1994). “Settlement of compacted fills caused by wetting.” Proc. of Settlement ‘94, Geotechnical Engineering Div., ASCE, Reston, VA.
Ozkul, H. Z., and Baykal, G. (2007). “Shear behavior of compacted rubber fibre-clay composite in drained and undrained loading.” J. Geotech. Geoenviron. Eng., 133(7), 767–781.
: Particle Flow Code in Two Dimensions, v3.1 [Computer software]. Itasca Consulting Group, Minneapolis.
Proctor, D. C., and Barton, R. R. (1974). “Measurements of the angle of interparticle friction.” Geotechnique, 24(4), 581.
Promputthangkoon, P., and Hyde, A. F. L. (2008). “Compressibility and liquefaction potential of rubber composite soils.” Proc. of the Int. Workshop on Scrap Tire Derived Geomaterials—Opportunities and Challenges, Taylor and Francis/Balkema, Leiden, The Netherlands, 161–170.
Rowe, R. K., and McIsaac, R. (2005). “Clogging of tire shreds and gravel permeated with landfill leachate.” J. Geotech. Geoenviron. Eng., 131(6), 682–193.
Santamarina, J. C., Klein, K. A., and Fam, M. A. (2001). Soils and waves, Wiley, West Sussex, England.
Seda, J. H., Lee, J. C., and Carraro, J. A. H. (2007). “Beneficial use of waste tire rubber for swelling potential mitigation in expansive soils.” Proc., Geo-Denver 2007, Geotechnical Special Publication No. 172, ASCE, Reston, VA.
Seed, H. B., Woodard, R. J., and Lundgren, R. (1962). “Prediction of swelling potential for compacted clays.” J. Soil Mech. Found. Div., 88(SM-3), 53–87.
Sridharan, A., and Gurtug, Y. (2004). “Swelling behavior of compacted fine grained soils.” Eng. Geol., 72(1–2), 9–18.
Stewart, D. I., Studds, P. G., and Cousens, T. W. (2003). “The factors controlling the engineering properties of bentonite enhanced sand.” Appl. Clay Sci., 23(1–4), 97–110.
Valdes, J. R., and Evans, T. M. (2008). “Sand-rubber mixtures: Experiments and numerical simulations.” Can. Geotech. J., 45(4), 588–595.
Valdes, J. R., and Liang, S. H. (2006). “Stress-controlled filtration with compressible particles.” J. Geotech. Geoenviron. Eng., 132(7), 861–868.
Youwai, S., and Bergado, D. T. (2003). “Strength and deformation characteristics of shredded ruber tire-sand mixtures.” Can. Geotech. J., 40(2), 254–264.
Zornberg, J. G., Cabral, A. R., and Viratjandr, C. (2004). “Behaviour of tire shred-sand mixtures.” Can. Geotech. J., 41(2), 227–241.
Information & Authors
Information
Published In
Copyright
© 2011 American Society of Civil Engineers.
History
Received: Feb 24, 2010
Accepted: Nov 9, 2010
Published online: Nov 11, 2010
Published in print: May 1, 2011
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.