Variables Controlling Strength of Artificially Cemented Sand: Influence of Curing Time
Publication: Journal of Materials in Civil Engineering
Volume 23, Issue 5
Abstract
The present research aims to quantify the influence of the curing time period, amount of cement, porosity, and voids/cement ratio in the assessment of unconfined compressive strength () of artificially cemented sand. A program of unconfined compression tests considering distinct curing time periods (), porosities (), and cement contents () was carried out in the present study. It has been found that a power function adapts well unconfined compressive strength values with increasing cement content and with reducing porosity of the compacted mixture. As expected, the unconfined compressive strength of the cemented sand increases with an increasing curing time period. It was also shown that the voids/cement ratio () is a good parameter in the evaluation of the unconfined compressive strength of the cemented sand studied, for the whole range of cement and porosities studied, at each specific curing time period studied. Finally, a unique relationship can be achieved linking the unconfined compressive strength () with the voids/cement ratio () and the curing period ().
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors wish to express their gratitude to the Brazilian Research Council CNPq/MCT (Projects Produtividade em Pesquisa Grant # UNSPECIFIED301869/2007-3, Edital Universal Grant # UNSPECIFIED472851/2008-0, PNPD Grant # UNSPECIFIED558474/2008-0 and INCT-REAGEO Grant # UNSPECIFIED573795/2008-8), to the Brazilian Electrical Energy Agency ANEEL (Project UNSPECIFIEDP&D 0089-036/2006-CEEE-GT/9936455), and to UNSPECIFIEDPRODOC CAPES for their financial support to the research group. The authors would also like to thank the anonymous reviewers for their insightful comments and suggestions that improved the content of this technical note.
References
Associação Brasileira de Normas Técnicas (ABNT). (2010). “Mortar and concrete—Test method for compressive strength of cylindrical specimens.” NBR 5739-80, Rio de Janeiro, Brazil (in Portuguese).
ASTM. (2010a). “Standard classification of soils for engineering purposes.” ASTM D 2487-06, West Conshohocken, PA.
ASTM. (2010b). “Standard specification for portland cement.” ASTM C 150-09, West Conshohocken, PA.
ASTM. (2010c). “Standard test method for compressive strength of cylindrical concrete specimens.” ASTM C 39-09, West Conshohocken, PA.
ASTM. (2010d). “Standard test method for measurement of soil suction using filter paper.” ASTM D 5298-03, West Conshohocken, PA.
Chandler, R. J., Crilly, M. S., and Montgomery-Smith, G. (1992). “A low-cost method of assessing clay desiccation for low-rise buildings.” Proc., of the ICE—Civil Engineering, 2(2), 82–89.
Clough, G. W., Sitar, N., Bachus, R. C., and Rad, N. S. (1981). “Cemented sands under static loading.” J. Geotech. Engrg. Div., 107(6), 799–817.
Consoli, N. C., Cruz, R. C., and Floss, M. F. (2010). “Parameters controlling tensile and compressive strength of artificially cemented sand.” J. Geotech. Geoenviron. Eng., 136(5), 759–763.
Consoli, N. C., Dalla, Rosa F., and Fonini, A. (2009a). “Plate load tests on cemented soil layers overlaying weaker soil.” J. Geotech. Geoenviron. Eng., 135(12), 1846–1856.
Consoli, N. C., Foppa, D., Festugato, L., and Heineck, K. S. (2007). “Key parameters for strength control of artificially cemented soils.” J. Geotech. Geoenviron. Eng., 133(2), 197–205.
Consoli, N. C., Lopes, L. S. Jr., Foppa, D., and Heineck, K. S. (2009b). “Key parameters dictating strength of lime/cement-treated soils.” Proc., Institution of Civil Engineers—Geotechnical Engineering, 162(2), 111–118.
Consoli, N. C., Viana da Fonseca, A., Cruz, R. C., and Heineck, K. S. (2009c). “Fundamental parameters for the stiffness and strength control of artificially cemented sand.” J. Geotech. Geoenviron. Eng., 135(9), 1347–1353.
Consoli, N. C., Rotta, G. V., and Prietto, P. D. M. (2006). “Yielding-compressibility-strength relationship for an artificially cemented soil cured under stress.” Géotechnique, London, 56(1), 69–72.
Felt, E. J. (1955). “Factors influencing physical properties of soil-cement mixtures.” Research and development laboratories of the Portland Cement Association: Bull. D5, authorized reprint from Bull. 108, The Highway Research Board.
Ingles, O. G., and Metcalf, J. B. (1972). Soil stabilization—Principles and practice. Butterworths, Australia.
Mitchell, J. K. (1981). “Soil improvement—State-of-the-art report.” Proc., 10th Int. Conf. on Soil Mechanics and Foundation Eng., Int. Society of Soil Mechanics and Foundation Eng., Stockholm, Sweden, 509–565 Balkema, Rotterdam, Netherlands.
Porbaha, A., Tanaka, H., and Kobayashi, M. (1998). “State of the art in deep mixing technology. Part II: Applications.” Proc., of the ICE—Ground Improvement, 2(2), 125–139.
Information & Authors
Information
Published In
Copyright
© 2011 American Society of Civil Engineers.
History
Received: Mar 15, 2010
Accepted: Oct 8, 2010
Published online: Oct 26, 2010
Published in print: May 1, 2011
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.