Mechanical Behavior of Anchorages for Reinforcing Marine Stone Structures Subjected to Sea Waves
Publication: Journal of Materials in Civil Engineering
Volume 23, Issue 5
Abstract
This study shows the results of a research project conducted to study the technical feasibility of the reconstruction of a real marine structure of natural rock. The experimental campaign enables the analysis of the behavior of stainless steel anchorages adhered with polymeric adhesives for strengthening the stone structure. To this end, mechanical tests were carried out to characterize the adhesive-steel-stone system and to verify the static effectiveness of anchorages, both in situations of nonimmersion and immersion in seawater. Tensile tests in anchorages under cyclic loading were performed in addition to other trials to estimate the bond stress under shear of epoxy polymer adhesive with the stone substrate and bending tests to evaluate the performance of stones reinforced with epoxy polymer mortar and stainless steel. The results obtained provide for an advance in the difficult field of the selection of materials potentially applied to the reinforcement of structures subjected to complex and varied mechanical actions, particularly in highly aggressive environments, such as seawater.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The writers of this paper wish to thank the City Council of Santander, Spain, for their confidence in the team who carried out this study on the technical feasibility of rebuilding the Horadada Island in the Bay of Santander.
References
Asprone, D., Cadoni, E., and Prota, A. (2009). “Tensile high strain-rate behavior of reinforcing steel from an existing bridge.” ACI Struct. J., 106(4), 523–529.
Azari, S., Papini, M., Schroeder, J. A., and Spelt, J. K. (2010). “The effect of mode ratio and bond interface on the fatigue behavior of a highly-toughened epoxy.” Eng. Fract. Mech., 77(3), 395–414.
Borri, A., Casadei, P., Castori, G., and Hammond, J. (2009). “Strengthening of brick masonry arches with externally bonded steel reinforced composites.” J. Compos. Constr., 13(6), 468–475.
Bowditch, M. R., Hiscock, D., and Moth, A. D. (1992). “Relationship between hydrolytic stability of adhesive joints and equilibrium water content.” Int. J. Adhes. Adhes., 12(3), 164.
Burtscher, S. L. (2008). “Wedge anchorage for CFRP strips.” J. Compos. Constr., 12(4), 446.
Chopra, A. K. (2007). Dynamics of structures: Theory and applications to earthquake engineering, 3rd Ed., Pearson Prentice-Hall, Upper Saddle River, New Jersey.
de Morais, A. B., Pereira, A. B., Teixeira, J. P., and Cavaleiro, N. C. (2007). “Strength of epoxy adhesive-bonded stainless-steel joints.” Int. J. Adhes. Adhes., 27(8), 679–686.
Dean, W. E. (1998). Machining, Marcel Dekker, New York.
Gaukler, J. Ch., Fehling, P., and Possart, W. (2009). “Thermo-oxidative and hydrothermal ageing of epoxy-dicyandiamide adhesive in bonded stainless steel joints.” IOP Conf. Ser.: Mater. Sci. Eng., 5, 012002.
Isgor, O. B., and Razaqpur, A. G. (2006). “Advanced modelling of concrete deterioration due to reinforcement corrosion.” Can. J. Civ. Eng., 33(6), 707–718.
Kafkalidis, M. S., and Thouless, M. D. (2002). “The effects of geometry and material properties on the fracture of single lap-shear joints.” Int. J. Solids Struct., 39(17), 4367–4383.
Locati, L. (1952). “Programmed fatigue test, variable amplitude rotat.” Metallurgia Italiana, 44(4), 135–144 (in Italian).
Novidis, D. G., and Pautazopoulou, S. J. (2008). “Bond tests of short NSM-FRP and steel bar anchorages.” J. Compos. Constr., 12(3), 323–333.
Sebastian, W. (2006). “Performance implications of imperfectly plastic material in metallic structures with nonmetallic reinforcement.” J. Struct. Eng., 132(2), 237–243.
Sebastian, W., and Luke, S. (2007). “Interface failure mechanics of elastically (advanced composite) reinforced steel members.” J. Struct. Eng., 133(5), 683–694.
Suárez, J. C., de Miguel, S., Díez de Ulzurrun, I., Pinilla, P., Herreros, M. A., and López, F. (2004). “Modos de fallo en un material híbrido estructural para construcción naval: Malecón.” Anales de Mecánica de la Fractura, 21, 350–355, (in Spanish).
Thomas, C., Lombillo, I., Polanco, J. A., Villegas, L., Setién, J., Biezma, M. V. (2010). “Polymeric and cementitious mortars for the reconstruction of natural stone structures exposed to marine environments.” Composites, Part B, 41(8), 663–672.
Towse, A., Potter, K. D., Wisnom, M. R., and Adams, R. D. (1999). “The sensitivity of a Weibull failure criterion to singularity strength and local geometry variations.” Int. J. Adhes. Adhes., 19(1), 71–82.
Villegas, L., and Lombillo, I. (2008). “Estudios sobre la viabilidad técnica de la reconstrucción de la isla Horadada en la bahía de Santander.” Technical report developed by request of the Santander City Council, Univ. of Cantabria, Cantabria, Spain (in Spanish).
Wang, C. H., and Rose, L. R. F. (2000). “Compact solutions for the corner singularity in bonded lap joints.” Int. J. Adhes. Adhes., 20, 145–154.
Yong, Y.-K., Gadegbeku, C. B. K., and Nawy, E. G. (1987). “Anchorage zone stresses of beams subjected to shear forces.” J. Struct. Eng., 113(8), 1789–1805.
Zhou, H. (2009). “Reconsideration of seismic performance and design of beam-column joints of earthquake-resistant reinforced concrete frames.” J. Struct. Eng., 135(7), 762–773.
Information & Authors
Information
Published In
Copyright
© 2011 American Society of Civil Engineers.
History
Received: Mar 3, 2010
Accepted: Oct 21, 2010
Published online: Oct 26, 2010
Published in print: May 1, 2011
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.