Moisture Measurements in Masonry Materials by Time Domain Reflectometry
Publication: Journal of Materials in Civil Engineering
Volume 23, Issue 4
Abstract
Time domain reflectometry (TDR) has been evaluated as a tool for the measurement of the moisture content of masonry materials. To this aim, the relationship between relative dielectric permittivity, measured by TDR, and volumetric water content, measured gravimetrically, has been experimentally determined over samples of three cement mortars and a clay brick. The obtained experimental points do not fit the calibration curves available in literature for other porous materials, such as soils and rocks. Instead, specific calibration relationships have been determined. The obtained results show that in all cases dielectric permittivity is highly sensitive to moisture variations, indicating TDR as a promising tool for moisture measurement of building materials. Owing to the feasibility of the proposed experimental procedure for moisture measurements of real masonry walls, the technique appears to be suitable for field monitoring applications.
Get full access to this article
View all available purchase options and get full access to this article.
References
Adan, O., Brocken, H., Carmeliet, J., Hens, H., Roels, S., and Hagentoft, C.-E. (2004). “Determination of liquid water transfer properties of porous building materials and development of numerical assessment methods: Introduction to the EC HAMSTAD project.” J. Therm. Envelope Build. Sci., 27(4), 253–260.
Cultrone, G., Sebastiàn, E., and Ortega Huertas, M. (2007). “Durability of masonry systems: A laboratory study.” Constr. Build. Mater., 21, 40–51.
Fassina, V., Favaro, M., Naccari, A., and Pigo, M. (2002). “Evaluation of compatibility and durability of a hydraulic lime-based plaster applied on brick wall masonry of historical buildings affected by rising damp phenomena.” J. Cult. Herit., 3, 45–51.
Gong, Y., Cao, Q., and Sun, Z. (2003). “The effects of soil bulk density, clay content and temperature on soil water content measurement using time-domain reflectometry.” Hydrol. Processes, 17, 3601–3614.
Hauschild, T., and Menke, F. (1998). “Moisture measurement in masonry walls using a non-invasive reflectometer.” Electron. Lett., 34(25), 2413–2414.
Korhonen, C. J., Janoo, V. C., and Berini, C. M. (1997). “Time-domain reflectometry of water content in portland cement concrete.” Special Rep. 97-27, U.S. Army Corps of Engineers.
Lubelli, B., van Hees, R. P. J., and Groot, C. J. W. P. (2004). “The role of sea salts in the occurrence of different damage mechanisms and decay patterns on brick masonry.” Constr. Build. Mater., 18, 119–124.
Malicki, M. A., Plagge, R., and Roth, C. H. (1996). “Improving the calibration of dielectric TDR soil moisture determination taking into account the solid soil.” Eur. J. Soil Sci., 47, 357–366.
Pavlík, Z., and Černý, R. (2004). “Application of TDR measurement technology for construction materials in semi-scale experiments.” Int. Agrophys., 18, 249–252.
Pavlík, Z., and Černý, R. (2008). “Experimental assessment of hygrothermal performance of an interior thermal insulation system using a laboratory technique simulating on-site conditions.” Energy Build., 40(5), 673–678.
Pavlík, Z., Jiřičková, M., Černý, R., Sobczuk, H., and Suchorab, Z. (2006). “Determination of moisture diffusivity using the time domain reflectometry (TDR) method.” J. Build. Phys., 30(1), 59–70.
Pavlík, Z., Pavlík, J., Jiřičková, M., and Černý, R. (2002). “System for testing the hygrothermal performance of multi-layered building envelopes.” J. Thermal Env. Bldg. Sci., 25, 239–249.
Phillipson, M. C., Baker, P. H., Davies, M., Ye, Z., Galbraith, G. H., and McLean, R. C. (2008). “Suitability of time domain reflectometry for monitoring moisture in building materials.” Build. Serv. Eng. Res. Technol., 29(3), 261–272.
Plagge, R., Scheffler, G., Grunewald, J., and Funk, M. (2006). “On the hysteresis in moisture storage and conductivity measured by the instantaneous profile method.” J. Build. Phys., 29(3), 247–259.
Raimondo, M., Dondi, M., Mazzanti, F., Stefanizzi, P., and Bondi, P. (2007). “Equilibrium moisture content of clay bricks: The influence of the porous structure.” Build. Environ., 42, 926–932.
Regalado, C. M. (2006). “A geometrical model of bound water permittivity based on weighted averages: the allophone analogue.” J. Hydrol. (Amsterdam), 316, 98–107.
Robinson, D. A., Jones, S. B., Wraith, J. M., Or, D., and Friedman, S. P. (2003). “A review of advances in dielectric and electrical conductivity measurement in soils using time domain reflectometry.” Vadose Zone J., 2, 444–475.
Roels, S., et al. (2004). “A comparison of different techniques to quantify moisture content profiles in porous building materials.” J. Therm. Envelope Build. Sci., 27(4), 261–276.
Roth, K., Schulin, R., Fluhler, H., and Attinger, W. (1990). “Calibration of time domain reflectometry for water content measurement using a composite dielectric approach.” Water Resour. Res., 26, 2267–2273.
Sakaki, T., and Rajaram, H. (2006). “Performance of different types of time domain reflectometry probes for water content measurement in partially saturated rocks.” Water Resour. Res., 42, W07404.
Sass, O. (2005). “Rock moisture measurements: Techniques, results, and implications for weathering.” Earth Surf. Processes Landforms, 30, 359–374.
Selvarajah, S., and Johnston, A. J. (1995). “Water permeation through cracked skin masonry.” Build. Environ., 30, 19–28.
Topp, G. C., Davis, J. L., and Annan, A. P. (1980). “Electromagnetic determination of soil water content: Measurements in coaxial transmission lines.” Water Resour. Res., 16, 574–582.
Information & Authors
Information
Published In
Journal of Materials in Civil Engineering
Volume 23 • Issue 4 • April 2011
Pages: 441 - 444
Copyright
© 2011 American Society of Civil Engineers.
History
Received: Oct 30, 2009
Accepted: Sep 29, 2010
Published online: Oct 1, 2010
Published in print: Apr 1, 2011
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.