Analysis of Asphalt Concrete Permeability Data Using Representative Pore Size
This article has been corrected.
VIEW CORRECTIONPublication: Journal of Materials in Civil Engineering
Volume 23, Issue 2
Abstract
The permeability of asphalt concrete has been the subject of much study by pavement engineers over the last decade. The work undertaken has tended to focus on high air voids as the primary indicator of permeable asphalt concrete. This paper presents a simple approach for understanding the parameters that affect permeability. Principles explained by Taylor in 1956 in channel theory work for soils are used to derive a new parameter—representative pore size. Representative pore size is related to the air voids in the compacted mix and the of the asphalt mix grading curve. Collected Superpave permeability data from published literature and data collected by the writers at the Queensland Department of Transport and Main Roads is shown to be better correlated with representative pore size than air voids, reducing the scatter considerably. Using the database of collected field and laboratory permeability values an equation is proposed that pavement engineers can use to estimate the permeability of in-place pavements.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The writers would like to thank the Queensland Department of Transport and Main Roads for providing the financial support for this paper. The views expressed in this paper are that of the writers and do not necessarily reflect the position of other entities. Thanks are also due to Mr. G.W. Maupin of the Virginia Department of Transportation (VDOT) who provided the first writer his permeability data for analysis. Thanks are also due to Dr. S.K. Haigh of the University of Cambridge for his helpful review of the work.
References
Abdullah, W., Obaidat, M., and Nazem, M. (1998). “Influence of aggregate type and gradation on voids of asphalt concrete pavements.” J. Mater. Civ. Eng., 10(2), 76–85.
Arambula, E., Masad, E., and Martin, A. E. (2007). “Influence of air void distribution on the moisture susceptibility of asphalt mixes.” J. Mater. Civ. Eng., 19(8), 655–664.
Cooley, L. A., Jr., Brown, E. R., and Maghsoodloo, S. (2001). “Development of critical field permeability and pavement density values for coarse graded superpave pavements.” Rep. No. 01-03, National Centre for Asphalt Technology, Auburn Univ., Auburn, Ala.
Cooley, L. A., Jr., Prowell, B. D., Brown, E. R., Hall, K., Button, J., and Davis, R. (2002). “Issues pertaining to the permeability characteristics of coarse graded superpave mixes.” Asph. Paving Technol., 71, 1–29.
Haddock, J. E., and Prather, M. (2004). “Investigation of permeability on Indiana SR-38.” J. Perform. Constr. Facil., 18(3), 136–141.
Hewitt, C. (1991). “A study of asphalt permeability.” Bachelor of Engineering thesis, Univ. of Central Queensland, Rockhampton, Australia.
Jaeger, C. (1956). Engineering fluid mechanics, Blackie & Son, London.
Kanitpong, K., Benson, C. H., and Bahia, H. U. (2001). “Hydraulic conductivity (permeability) of laboratory-compacted asphalt mixtures.” Transportation Research Record. 1767, Transportation Research Board, Washington, D.C., 50–58.
Leonards, G. A. (1962). Foundation engineering, McGraw-Hill, New York.
Mallick, R. B., Cooley, L. A., Jr., Teto, M. R., Bradbury, R. L., and Peabody, D. (2003). “An evaluation of factors affecting permeability of superpave designed pavements.” Rep. No. 03-02, National Centre for Asphalt Technology, Auburn Univ., Auburn, Ala.
Masad, E., Al-Omari, A., and Lytton, R. (2006). “Simple method for predicting laboratory and field permeability of hot-mix asphalt.” Transport Research Record. 1970, Transportation Research Board, Washington D.C., 55–63.
Masad, E., Birgisson, B., Al-Omari, A., and Cooley, A. (2004). “Analytical derivation of permeability and numerical simulation of fluid flow in hot-mix asphalt.” J. Mater. Civ. Eng., 16(5), 487–496.
Maupin, W., Jr. (2001). “Asphalt permeability testing-sample preparation & testing variability.” Transportation Research Record. 1767, Transportation Research Board, Washington, D.C., 40–47.
Mohammad, L., Herath, A., and Huang, B. (2003). Evaluation of permeability of superpave asphalt mixtures, Transportation Research Board, Washington D.C., ⟨http://www.ltrc.lsu.edu/TRB_82/TRB2003-002464.pdf⟩ (July 4, 2006).
Parkin, A. K. (1971). “Field solutions for turbulent seepage flow.” J. Soil Mech. Found. Div., 97(SM1), 209–218.
Smith, R. W., and Gotolski, W. H. (1969). “A study of physical factors affecting the durability of asphaltic pavements.” PB 189 832, Pennsylvania State Univ., University Park, Pa.
Tan, S. A., Fwa, T. F., and Guwe, Y. K. (2000). “New apparatus for measuring the drainage properties of unbound granular aggregates.” Proc., 5th Int. Symp. on Unbound Aggregates in Road Construction, A. R. Dawson, ed., Balkema, Rotterdam, The Netherlands, 63–67.
Tarefder, R. A., White, L., and Zaman, M. (2005). “Neural Network model for asphalt concrete permeability.” J. Mater. Civ. Eng., 17(1), 19–27.
Taylor, D. W. (1956). Soil mechanics, Wiley, New York.
Vardanega, P. J., Nataatmadja, A., Waters, T., and Ramanujam, J. (2008). “A study of asphalt permeability: Empirical permeability models.” Proc., 23rd ARRB Conf.—Research Partnering with Practitioners (CD-ROM), Australian Road Research Board, Adelaide, South Australia.
Waters, T. J. (1986). “Voids in asphaltic concrete.” Queensland Main Roads Internal Rep. No. TT99, Queensland Dept. of Transport and Main Roads, Brisbane, Queensland, Australia.
Waters, T. J. (1990). “A study of the infiltration properties of road surface materials.” M.App.Sc. thesis, Queensland Univ. of Technology, Brisbane, Queensland, Australia.
Waters, T. J. (1993). “Categorisation of asphalt on the basis of permeability and normalised air voids.” Queensland Main Roads Internal Rep. No. TT170, Queensland Dept. of Transport and Main Roads, Brisbane, Queensland, Australia.
Waters, T. J. (1998). “A study of water infiltration through asphalt road surface materials.” Proc., Int. Symp. on Subdrainage in Roadway Pavements and Subgrades, Granada, Spain, 311–317.
Waters, T. J., and Vardanega, P. J. (2009). “Re-examination of the coefficient of determination (R2) using road materials engineering case studies.” Road & Transport Research: J. Australian and New Zealand Research and Practice, 18(3), 3–11.
Westerman, J. R. (1998). “AHTD’s experience with superpave pavement permeability.” Proc., Arkansas Superpave Symp., Little Rock, Ark., ⟨http://www.utexas.edu/research/superpave/articles/jrw10a.html⟩ (Dec. 4, 2007).
Information & Authors
Information
Published In
Copyright
© 2011 ASCE.
History
Received: Aug 13, 2009
Accepted: Jun 25, 2010
Published online: Jul 10, 2010
Published in print: Feb 2011
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.