Improved Repair of Concrete Structures Using Polymer Concrete Patch and FRP Overlay
Publication: Journal of Materials in Civil Engineering
Volume 22, Issue 4
Abstract
Concrete structures that are damaged due to cracking and spalling, associated with corrosion of reinforcing bars, are often repaired using shallow depth surface patches. Cracking and full or partial delamination of the patch repairs due to shrinkage and continued corrosion is generally unavoidable. The repair typically lasts only for a few years in corrosive environments associated with coastal regions or the use of deicing salts. To provide more durable patch repairs, the use of a fiber-reinforced polymer (FRP) fabric applied as an overlay on top of a traditional polymer concrete patching material was investigated. The FRP overlay can serve as a secondary reinforcement and act as a barrier against the diffusion of moisture and chloride ions, thereby improving the performance of the patch by reducing cracking and slowing down the corrosion process. Two-dimensional finite-element analysis was used to select a suitable FRP material and configuration for the overlay. The effectiveness of the proposed improved repair method was assessed using accelerated corrosion testing of rectangular concrete prism specimens with a polymer concrete patch and an FRP overlay. Reinforcement mass loss and expansive strains in concrete due to corrosion were measured on specimens with and without the FRP overlay. The measurements indicated reductions in concrete strains, crack propagation, and corrosion level when the FRP overlay was used. Three-dimensional finite-element analysis was conducted to understand the influence of using an FRP overlay on the concrete stress distribution and the arrest of cracking.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This research was sponsored by the Michigan Department of Transportation (MDOT). The writers thank the project manager, Steve Kahl, and all members of the research advisory panel (especially Roger D. Till) for their input related to this research. The writers also thank Professor Rigoberto Burgueño of Michigan State University for suggesting the use of FRP overlays to reinforce patch repairs.
References
ASTM. (2002). “Standard practice for preparing, cleaning, and evaluating corrosion test specimens.” G1-90, West Conshohocken, Pa.
Austin, S., Robins, P., and Pan, Y. (1999). “Shear bond testing of concrete repairs.” Cem. Concr. Res., 29, 1067–1076.
Baiyasi, M. I., and Harichandran, R. S. (2001). “Corrosion and wrap strains in concrete bridge columns repaired with FRP wraps.” Proc., 80th Annual Meeting of the Transportation Research Board (CD-ROM), Transportation Research Board, Washington, D.C.
Baluch, M. H., Rahman, M. K., and Al-Gadhib, A. H. (2002). “Risks of cracking and delamination in patch repair.” J. Mater. Civ. Eng., 14(4), 294–302.
Baskar, K., Shanmugam, N. E., and Thevendran, V. (2002). “Finite-element analysis of steel-concrete composite plate girder.” J. Struct. Eng., 128(9), 1158–1168.
Batis, G., and Routoulas, T. (1999). “Steel rebars corrosion investigation with strain gages.” Cem. Concr. Compos., 21(3), 163–171.
Beaudette, M. R. (2001). “Investigation of patch accelerated corrosion with galvashield XP.” Internal rep., Norcure Chloride Removal Systems.
Du, Y. G., Chan, A. H. C., and Clark, L. A. (2006). “Finite element analysis of the effects of radial expansion of corroded reinforcement.” Comput. Struc., 84(13–14), 917–929.
El Maaddawy, T. A., Soudki, K. A., and Khaled, A. (2003). “Effectiveness of impressed current technique to simulate corrosion of steel reinforcement in concrete.” J. Mater. Civ. Eng., 15(1), 41–47.
Harichandran, R. S., and Nossoni, G. (2008). “Improved shallow depth patches for concrete structures.” Rep. No. RC-1502, Michigan Dept. of Transportation, Lansing, Mich.
Hibbit, Karlsson, and Sorensen Inc. (2002). ABAQUS theory manual and users’ manual, version 6.3, ABAQUS, Inc., Providence, R.I.
Khalifa, A., Gold, W. J., Nanni, A., and Abdel Aziz, M. I. (1998). “Contribution of externally bonded FRP to shear capacity of flexural members.” J. Compos. Constr., 2(4), 195–203.
Mehta, P., and Monteiro, J. (1993). Concrete, structure, properties, and materials, 2nd Ed., Prentice-Hall, Englewood Cliffs, N.J., 160–164.
Yuan, Y., Li, G., and Cai, Y. (2003). “Modeling for prediction of restrained shrinkage effect in concrete repair.” Cem. Concr. Res., 33(3), 347–352.
Information & Authors
Information
Published In
Copyright
© 2010 ASCE.
History
Received: Aug 16, 2008
Accepted: May 15, 2009
Published online: May 22, 2009
Published in print: Apr 2010
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.