Frequency Wave Number–Domain Analysis of Air-Coupled Impact-Echo Tests in Concrete Slab
Publication: Journal of Infrastructure Systems
Volume 24, Issue 3
Abstract
An air-coupled (also known as noncontact or contactless) sensing technique in the impact-echo method has been developed and its practical application to the field has been significantly improved. However, unlike the flexural mode frequency, the thickness mode frequency is difficult to measure using the air-coupled sensing technique mainly due to direct acoustic noise from the impact source. The direct acoustic noise is transmitted through the air, while the thickness mode is a portion of leaky Lamb waves from a platelike concrete slab, known as the zero-group velocity (ZGV) or standing wave motion. The noise components and leaky Lamb waves can be separated in the frequency-wave number (f-k) domain because of their different characteristics in phase velocity. In this paper, the f-k domain analysis is validated through both numerical simulations and experiments on two different thicknesses including full depth of concrete slab and shallow delamination. For shallow delamination, a dry-coupled ultrasonic transducer is applied to generate high-frequency ultrasonic waves corresponding to the ZGV frequency of the thickness while a microelectromechanical system (MEMS) is used as an air-coupled sensor. The results demonstrate that the proposed f-k domain analysis scheme and the applied hybrid hardware are capable of clearly detecting the thickness mode frequency and minimize the direct acoustic noise, while the conventional impact-echo method has limits.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The work reported here was made possible by support from the National Research Council Research Associateship Programs. The authors are grateful for important contributions to the experimental hardware provided by Proceq and constructive discussion by Dr. John S. Popovics and Mr. Homin Song.
References
Alchenbach, J. D. 1973. “Wave propagation in elastic solids.” In North-Holland series in applied mathematics and mechanics. Amsterdam, Netherlands: Elsevier.
ASCE. 2013. “Report card for America’s infrastructure.” Accessed November 14, 2013. http://www.infrastructurereportcard.org.
ASTM. 2015. “Standard test method for measuring the P-wave speed and the thickness of concrete plates using the impact-echo method.” ASTM C1383-15. West Conshohocken, PA: ASTM.
Bjurstrom, H., and N. Ryden. 2016. “Detecting the thickness mode frequency in a concrete plate using backward wave propagation.” J. Acoust. Soc. Am. 139 (2): 649–657. https://doi.org/10.1121/1.4941250.
Carino, N. J., M. Sansalone, and N. N. Hsu. 1986. “A point source-point receiver, pulse-echo technique for flaw detection in concrete.” ACI J. Proc. 83 (2): 199–208.
Choi, H. 2016 “Evaluation of internal damage in reinforced concrete elements using ultrasonic tomography.” Ph.D. dissertation, Univ. of Illinois at Urbana-Champaign.
Choi, H., S. Shams, and H. Azari. 2017. “The improvement of impact-echo method using hybrid system and guided wave analysis.” In Proc., Int. Society for Maintenance and Rehabilitation of Transportation Infrastructures. Seoul, Korea.
Choi, H., H. Song, Q. N. Tran, J. R. Roesler, and J. S. Popovics. 2016. “Contactless system for continuous monitoring of early-age concrete properties.” Concr. Int. 38 (9): 35–41.
Clorennec, D., C. Prada, and D. Royer. 2007. “Local and noncontact measurements of bulk acoustic wave velocities in thin isotropic plates and shells using zero group velocity Lamb modes.” J. Appl. Phys. 101 (3): 034908. https://doi.org/10.1063/1.2434824.
Dai, X., J. Zhu, Y.-T. Tsai, and M. R. Haberman. 2011. “Use of parabolic reflector to amplify in-air signals generated during impact-echo testing.” J. Acoust. Soc. Am. 130 (4): EL167–EL172. https://doi.org/10.1121/1.3632106.
Gibson, A., and J. S. Popovics. 2005. “Lamb wave basis for impact-echo method analysis.” J. Eng. Mech. 131 (4): 438–443. https://doi.org/10.1061/(ASCE)0733-9399(2005)131:4(438).
Gomez, P., J.-P. Fernandez-Alvarez, A. Ares, and E. Fernandez. 2017. “Guided-wave approach for spectral peaks characterization of impact-echo tests in layered systems.” J. Infrastruct. Syst. 23 (4): 04017009. https://doi.org/10.1061/(ASCE)IS.1943-555X.0000359.
Graff, K. F. 1975. Wave motion in elastic solids. New York: Dover Publication, Inc.
Groschup, R., and C. U. Grosse. 2015. “MEMS microphone array sensor for air-coupled impact-echo.” Sensors 15 (7): 14932–14945. https://doi.org/10.3390/s150714932.
Grunsteidl, C. M., I. A. Veres, and T. W. Murray. 2015. “Experimental and numerical study of the exitability of zero group velocity Lamb waves by laser-ultrasound.” J. Acoust. Soc. Am. 138 (1): 242–250. https://doi.org/10.1121/1.4922701.
Kee, S.-H., and N. Gucunski. 2016. “Interpretation of flexural vibration modes from impact-echo testing.” J. Infrastr. Syst. 22 (3): 04016009. https://doi.org/10.1061/(ASCE)IS.1943-555X.0000291.
Laurent, J., D. Royer, T. Hussain, F. Ahmad, and C. Prada. 2015. “Laser induced zero-group velocity resonances in transversely isotropic cylinder.” J. Acoust. Soc. Am. 137 (6): 3325–3334. https://doi.org/10.1121/1.4921608.
Lin, S., and J. C. Ashlock. 2015. “Comparison of MASW and MSOR for surface wave testing of pavements.” J. Environ. Eng. Geophys. 20 (4): 277–285. https://doi.org/10.2113/JEEG20.4.277.
Oh, T., J. S. Popovics, and S.-H. Sim. 2013. “Analysis of vibration for regions above rectangular delamination defects in solids.” J. Sound Vibr. 332 (7): 1766–1776. https://doi.org/10.1016/j.jsv.2012.11.003.
Prada, C., and D. Clorennec. 2009. “Influence of the anisotropy on zero-group velocity Lamb modes.” J. Acoust. Soc. Am. 126 (2): 620–625. https://doi.org/10.1121/1.3167277.
Prada, C., D. Clorennec, and D. Royer. 2008. “Local vibration of an elastic plate and zero-group velocity Lamb modes.” J. Acoust. Soc. Am. 124 (1): 203–212. https://doi.org/10.1121/1.2918543.
Rose, J. L. 2014. Ultrasonic waves in solid media. New York: Cambridge University Press.
Serón F. J., F. J. Sanz, M. Kindelán, and J. I. Badal. 1990. “Finite-element method for elastic wave propagation.” Commun. Appl. Numer. Methods 6 (5): 359–368. https://doi.org/10.1002/cnm.1630060505.
Zhu, J., and J. S. Popovics. 2007. “Imaging concrete structures using air-coupled impact-echo.” J. Eng. Mech. 133 (6): 628–640. https://doi.org/10.1061/(ASCE)0733-9399(2007)133:6(628).
Information & Authors
Information
Published In
Copyright
©2018 American Society of Civil Engineers.
History
Received: May 17, 2017
Accepted: Feb 14, 2018
Published online: Jul 4, 2018
Published in print: Sep 1, 2018
Discussion open until: Dec 4, 2018
Notes
Presented at the 2017 MAIREINFRA (International Conference on Maintenance and Rehabilitation of Constructed Infrastructure Facilities) in Seoul. Choi, H., Shams, S., and Azari, H. (2017). “The Improvement of Impact-Echo Method Using Hybrid System and Guided Wave Analysis,” International Conference on Maintenance and Rehabilitation of Constructed Infrastructure Facilities, Seoul, Korea. C.6.1.
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.