A Dynamic Vehicle-Track Interaction Model for Predicting the Track Degradation Process
Publication: Journal of Infrastructure Systems
Volume 20, Issue 3
Abstract
Due to the repeated passage of trains, differential settlements are observed in the vertical direction of the railway tracks. These settlements depend on the platform quality, on the train speed, on the dynamic load, and on the track structural behavior. In recent years, several authors have defined laws and models for the prediction of settlement. The majority of those settlement models only consider the vertical degradation of the track, disregarding this phenomena in the lateral direction, since the vertical track geometry deteriorates faster than the horizontal one. In these models also the dynamic nature of the vehicle load is not considered accordingly. This paper presents a vehicle-track dynamic-interaction model for predicting the evolution of the vertical track profile and assessing the track response along the degradation process. The model is one-dimensional (1D) and it estimates the track degradation from a settlement law that uses deformation under instantaneous wheel passage as input. Although track degradation is a three-dimensional (3D) process, a 1D model is considered because the vertical component of the track settlement is the largest one. In order to predict the evolution of the track settlement due to the passage of the dynamic loads on the track, an iterative procedure is proposed. One cycle of this methodology is composed by three phases: numerical calculation of the train-track dynamic-interaction loads along the track, calculation of the track settlement, and definition of the track profile after settlement. Then, a new cycle begins. The proposed methodology is applied to a real track profile, measured in a Portuguese railway line, in order to understand the influence of the dynamic nature of the load on the track, the influence of the settlement rate and the influence of the type of vehicle on the evolution of the vertical track profile. The dynamic response of the track over time due to the evolution of the real vertical profile is evaluated through a vehicle-track dynamic-interaction approach. The attained results reveal the importance not only of the track irregularities, but also of the vehicle speed and characteristics on the evolution of the track profile. The numerical simulations presented in this paper evidence the potential of the proposed methodology, which can be used as a tool to forecast track settlement and to estimate the dynamic response of the track along the degradation process.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The present work has been funded by the Portuguese Foundation for Science and Technology (FCT). The first author also recognizes FCT for the financial support provided by the research grant SFRH/BD/25020/2005. The authors also gratefully acknowledge the Portuguese Railway Administration (REFER) for the collaboration and the access to the real data and also the support of the project “HSR-LIFE Development of tools for HSR lifecycle costs estimation for track design and maintenance management system” of the MIT-Portugal Program—Transportation Systems Area.
References
Al Shaer, A., Duhamel, D., Sab, K., Foret, G., and Schmitt, L. (2008). “Experimental settlement and dynamic behavior of a portion of ballasted railway track under high speed trains.” J. Sound Vib., 316(1–5), 211–233.
Bodin, V. (2001). “Comportement du ballast des voies ferrées soumises a un chargement vertical et latéral.” Ph.D. thesis, Ecole Nationale de Ponts et Chausses (in French).
Bruni, S., Collina, A., and Corradi, R. (2002). “Numerical modelling of railway runnability and ballast settlement in railroad bridges.” Proc., 4th Int. Conf. on Structural Dynamics, Munich, Germany.
Dahlberg, T. (2001). “Some railroad settlement models—A critical review.” Proc. Inst. Mech. Eng., 215(4), 289–300.
European Commission. (2008). “Technical specification for interoperability relating to the infrastructure subsystem of the trans-European high-speed rail system.” Offic. J. Eur. Communities, 2002(732), 245.
European Rail Research Institute (ERRI). (2001). “Railway bridges for —Final report.” ERRI-D214/RP9, ERRI, Utretch, Netherlands.
FEAP version 8.2 [Computer software], Berkeley, CA, Univ. of California.
Fröhling, R. D. (1997). “Deterioration of railway track due to dynamic vehicle loading and spatially varying track stiffness.” Ph.D. thesis, Univ. of Pretoria, Pretoria.
Gomes-Correia, A., et al. (2007). “Dynamic analysis of rail track for high speed trains. 2D approach.” Applications of computational mechanics in geotechnical engineering, L. R. Sousa, M. M. Fernandes, and E. A. Vargas, Jr., eds., Taylor and Francis, London.
Guérin, N. (1996). “Approche expérimentale et numérique du comportement du ballast des voies ferrées.” Ph.D. thesis, Ecole Nationale de Ponts et Chaussées (in French).
Indraratna, B., Nimbalkar, S., Rujikiatkamjorn, C., and Christie, D. (2011). “State-of-the-art design aspects of ballasted rail tracks incorporating particle breakage, role of confining pressure and geosynthetic reinforcement.” World Conf. Railway Research, WCRR, Lille, France.
Indraratna, B., Thakur, P. K., and Vinod, J. S. (2010). “Experimental and numerical study of railway ballast behavior under cyclic loading.” Int. J. Geomech., 136–144.
Iwnicki, S., Grassie, S., and Kik, W. (2000). “Track settlement prediction using computer simulation tools.” Veh. Syst. Dyn., 33(Suppl.), 2–12.
Kuo, C. M., and Huang, C. H. (2009). “Two approaches of finite-element modeling of ballasted railway track.” J. Geotech. Geoenviron. Eng., 455–458.
Lei, X., and Noda, N. (2002). “Analyses of dynamic response of vehicle and track coupling system with random irregularity track vertical profile.” J. Sound Vib., 258(1), 147–165.
Lua, F., Kennedy, D., Williams, F., and Lin, J. (2008). “Symplectic analysis of vertical random vibration for coupled vehicle-track systems.” J. Sound Vib., 317(1–2), 236–249.
Lundqvist, A. (2005). “Dynamic train/track interaction: Hanging sleepers, track stiffness variations and track settlement.” Ph.D. thesis, Linkpings Univ, Linköping, Sweden.
Mauer, L. (1995). “An interactive track-train dynamic model for calculation of track error growth.” Veh. Syst. Dyn., 24(sup1), 209–221.
Meissonnier, F. (2000). “European research for optimised ballasted track.” EUROBALT, Final Rep., European Commission, Paris.
Nash, S., and Sofer, A. (1996). Linear and nonlinear programming, McGraw-Hill, New York.
Office for Research and Experiments of the International Union of Railways (ORE). (1988). “Dynamic vehicle/track interaction phenomena, from the point of view of track maintenance.” Question D161, RP3.
Paderno, C. (2009). “Simulation of ballast behaviour under traffic and tamping process.” 9th Swiss Transport Research Conf., STRC, Ascona, Switzerland.
Rigueiro, C., Rebelo, C., and Silva, L. (2010). “Influence of ballast models in the dynamic response of railways viaducts.” J. Sound Vib., 329(15), 3030–3040.
Sato, Y. (1995). “Japanese studies on deterioration of ballasted track.” Veh. Syst. Dyn., 24(sup1), 197–208.
Sato, Y. (1997). “Optimization of track maintenance work on ballasted track.” Proc., World Congress on Railway Research, WCRR, 405–411.
Shenton, M. (1978). “Deformation of railway ballast under repeated loading conditions.” Railroad track mechanics and technology: Proc., Symp., Oxford.
Shenton, M. (1984). “Ballast deformation and track deterioration.” Proc., Conf. Track Technology, Univ. of Nottingham, 242–252.
Suiker, A. S. J., Selig, E. T., and Frenkel, R. (2005). “Static and cyclic triaxial testing of ballast and subballast.” J. Geotech. Geoenviron. Eng., 771–782.
Sun, Y. Q., and Dhanasekar, M. (2002). “A dynamic model for the vertical interaction of the rail track and wagon system.” Int. J. Solids Struct., 39(5), 1337–1359.
Taylor, R. L. (2008). FEAP—A finite element analysis program (8.2 user manual), Dept. of Civil and Environment Engineering, Univ. of California.
Vale, C., and Calçada, R. (2010). “Dynamic response of a coupled vehicle-track system to real longitudinal rail profiles.” 10th Int. Conf. Computational Structures Technology (CST 2010), Civil-Comp Press, U.K.
Xuecheng, B., Hongguang, J., and Yunmin, C. (2010). “Accumulative deformation in railway track induced by high-speed traffic loading of the trains.” Earthquake Eng. Eng. Vib., 9(3), 319–326.
Zhai, W. M., Wang, K. Y., and Lin, J. H. (2004). “Modelling and experiment of railway ballast vibrations.” J. Sound Vib., 270(4–5), 673–683.
Information & Authors
Information
Published In
Journal of Infrastructure Systems
Volume 20 • Issue 3 • September 2014
Copyright
© 2014 American Society of Civil Engineers.
History
Received: May 7, 2012
Accepted: Aug 26, 2013
Published online: Aug 28, 2013
Discussion open until: Jul 24, 2014
Published in print: Sep 1, 2014
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.