Use of Decorative Concrete Overlay for Transportation Infrastructure Design
Publication: Journal of Infrastructure Systems
Volume 19, Issue 3
Abstract
The novel concept of applying decorative concrete overlay (DCO) during the infrastructure design process supports the nationwide initiative for increased implementation of context-sensitive solutions. The DCO is a polymer-acrylic cementitious microtopping, a few millimeters thick, colored to look like stone, brick, or wood, for example, and skimmed or sprayed onto existing or new structural concrete. This research aimed to evaluate the potential of DCO to serve as a long-lasting aesthetic treatment for transportation infrastructure. A brief case study of typical decorative treatments and their associated costs indicated that DCO would be competitive in certain infrastructure applications. The DCO durability characteristics were examined by incorporating environmental conditions such as submersion in saltwater, exposure to ultraviolet light and moisture cycling, and intrusion of deicing salts (salt ponding). Fracture and pull-off adhesion testing were also conducted to evaluate the bonding of DCO to structural concrete. Flexural fracture testing showed that the bond between the DCO and concrete sample was unbroken, and failure was observed in the structural concrete. Adhesion testing indicated that the spray-on application method produces significantly stronger bond strengths than the alternative sponge technique. However, DCO must be sprayed on within a specific thickness range in order to achieve optimum strength. Chloride-ponding test results indicated that an additional benefit of DCO is that it acts as a protective coating against salt penetration. Overall, the research indicated that there may be significant potential for implementing DCO as a lasting and durable decorative contribution to the transportation design process.
Get full access to this article
View all available purchase options and get full access to this article.
References
ASTM. (2002). “Determining the penetration of chloride ion into concrete by ponding.” C1543-02, West Conshohocken, PA.
ASTM. (2004). “Determining the apparent chloride diffusion coefficient of cementitious mixtures by bulk diffusion.” C1556-04, West Conshohocken, PA.
ASTM. (2005a). “Standard test method for bond strength of epoxy-resin systems used with concrete by slant shear.” C882-05, West Conshohocken, PA.
ASTM. (2005b). “Standard test methods for abrasion resistance of organic coatings by falling abrasive.” D968-05, West Conshohocken, PA.
ASTM. (2005c). “Standard test method for pull-off adhesion strength of coatings on concrete using portable pull-off adhesion testers.” D7234-05, West Conshohocken, PA.
ASTM. (2005d). “Standard practice for operating xenon arc light apparatus for exposure of non-metallic materials.” G155-05, West Conshohocken, PA.
ASTM. (2007). “Standard practice for making and curing concrete test specimens in the laboratory.” C192/C192M-07, West Conshohocken, PA.
ASTM. (2008). “Standard test method for flexural strength of concrete (using simple beam with third-point loading).” C78-08, West Conshohocken, PA.
Ball, C. J., and Decandia, M. (2002). “Designing with colored architectural concrete.” Concr. Int., 24, 23–26.
Berger, W. F. (1989). “Surface preparation for concrete flooring.” J. Prot. Coat. Linings, 〈http://generalpolymers.com/surface_con.html〉 (Nov. 10, 2009).
Boyer, L. (2002). “Decorative concrete has come a long way.” Concr. Int., 24, 63–67.
CAG. (2008). “Technical information data sheets.” Flex-C-Ment, 〈http://www.flex-c-ment.com/technical.htm〉 (Feb. 14, 2012).
California Dept. of Transportation. (2009). “2009 Contract cost data.” 〈http://www.dot.ca.gov/hq/esc/oe/awards/〉 (Apr. 12, 2010).
Chiang, C. T., and Yang, C. C. (2007). “Relation between the diffusion characteristic of concrete from salt ponding test and accelerated chloride migration test.” Mater. Chem. Phys., 106(2–3), 240–246.
Concrete Int. (2009). “Awards celebrate the beauty of decorative concrete.” Concr. Int., 31(8), 24–27.
Decorative Concrete Council. (2010). “Decorative concrete council problems and practice.” 〈https://netforum.avectra.com/eweb/DynamicPage.aspx?Site=ASCC&WebCode=DCCPositionStatements〉 (Feb. 12, 2012).
Dept. of the Army. (1993). “Standard practice for shotcrete.” EM 1110-2-2005, U.S. Army Corps of Engineers, Washington, DC.
Fangman, J. (2002). “Imprinted concrete.” Concr. Int., 24, 30–31.
Federal Highway Administration (FHWA). (2010). “Environmental review toolkit: Streamlining and stewardship.” 〈http://www.environment.fhwa.dot.gov/strmlng/es4vitalfew.asp〉 (Jan. 25, 2011).
Frentress, D. (2002). “Colored concrete enhances highway corridor.” Concr. Int., 24(6), 68–70.
Garbacz, A., Gorke, M., and Courard, L. (2005). “Effect of concrete surface treatment on adhesion in repair systems.” Mag. Concr. Res., 57(1), 49–60.
Gibson, J. M. (1990). “Workshop of the world.” 〈http://www.workshopoftheworld.com/chestnut_hill/chestnut_hill.html〉 (Apr. 12, 2010).
Harris, B. (2004). “Decorative concreting—Where it’s been… and going.” Concr. Int., 26(6), 52–54.
Idaho Dept. of Transportation. (2010). “Cost estimate.” 〈http://itd.idaho.gov/bridge/manual/16%20Cost%20Estimating/16.2%20Unit%20Costs%20for%20Standard%20Bid%20Items%20&%20Special%20Provision%20Items.pdf〉 (Apr. 20, 2010).
Jones, M. (2007). “Accelerated weathering and durability.” Build, 〈http://www.branz.co.nz/cms_show_download.php?id=5cd1b8e82be965600f6f683c386d0d826a3bd9f2〉 (Jun. 22 2010).
Khan, H. J., and Shinwari, M. Q. (2008). “Shotcrete.” Grand solution manual, 〈http://www.aboutcivil.com/types-of-concrete.html〉 (Apr. 7, 2010).
Lamm, G. (2002). “Looking to add beauty? What about decorative overlay systems?” Concr. Int., 24(6), 27–29.
Lyashenko, B. A., Rishin, V. V., Astakhov, E. A., and Sharivker, S. Yu. (1972). “Investigation of the adhesion strength of coatings applied by detonation-gun flame spraying.” Strength Mater., 4(3), 287–290.
Meck, E., and Sirivivatnanon, V. (2003). “Field indicator of chloride penetration depth.” Cem. Concr. Res., 33(8), 1113–1117.
Monesi, P. (2002). “Bringing back D.C.’s majestic taft bridge lions.” Concr. Int., 24, 43–47.
Nasvik, J. (2004). “Pioneering efforts in decorative concrete flatwork.” Concr. Int., 26(6), 55–59.
Nasvik, J. (2006). “Decorative thin overlays for vertical application.” Concrete Construction Magazine, 〈http://www.concreteconstruction.net/finishes-and-surfaces/decorative-thin-overlays-for-vertical-application.aspx〉 (Apr. 7, 2006).
Nehdi, M., and Bernal, A. (2004). “Paradigms in concrete design and aesthetics.” Concr. Int., 26(6), 60–64.
Neuman, T., Schwartz, M., Clark, L., and Bednar, J. (2002). “A guide to best practices for achieving context sensitive solutions.” NCHRP Rep. 480, Transportation Research Board, Washington, DC, 137.
Passeno, J. (2000). “Formliner for decorative concrete.” U.S. Patent No. 6164037, 26.
Pennsylvania Dept. of Transportation. (1996). “Specifications for vertical structures.” Section 714, Publication 408M: Standards for concrete barriers, median barriers, and sound barrier panels, Harrisburg, PA.
Pennsylvania Dept. of Transportation. (2010). “Item price history search, engineering and construction management system 2/24/09 to 2/24/10.” 〈http://www.dot14.state.pa.us/ECMS/〉 (Apr. 12, 2010).
Quality Systems. (2012). “Surface applications.” PermaCrete decorative concrete overlays, 〈http://www.permacrete.com/architects/applications.php〉 (Feb. 12, 2012).
Ralston, T. (2002). “Bringing the seashore inside with decorative concrete.” Concr. Int., 24(6), 33–35.
Rodgers, R. (2004). “Successful colored flatwork.” Concr. Int., 26, 47–50.
RSMeans Engineering Dept. (2009). Heavy construction cost data, 23rd Ed., RSMeans, Kingston, MA, 68–69; 290–292.
Stewart, D. (2002). Context sensitive solutions, Pennsylvania Dept. of Transportation, Bureau of Design, 〈http://www.contextsensitivesolutions.org/content/reading/css-penndot/resources/css-penndot〉 (Apr. 10, 2010).
West, M. (2004). “Fabric—Formed concrete columns.” Concr. Int., 26, 42–45.
World Weather and Climate. (2008). “World weather and climate graphs, average climate charts, guide to precipitation, temperatures, best, friendly, holiday climate.” 〈http://www.climatetemp.info/usa/tampa-florida.html〉 (Jun. 3, 2010).
Yuan, Q., Shi, C., He, F., De Schutter, G., Audenaert, K., and Zheng, K. (2008). “Effect of hydroxyl ions on chloride penetration depth measurement using the colorimetric method.” Cem. Concr. Res., 38(10), 1177–1180.
Zhou, Q., Xu, Q., and Zhang, Z. (2008). “Measurements with a new peel adhesion test on waterproof membranes used on concrete bridge decks.” J. Test. Eval., 36(4), 1–6.
Information & Authors
Information
Published In
Copyright
© 2013 American Society of Civil Engineers.
History
Received: May 6, 2011
Accepted: Jul 30, 2012
Published online: Aug 15, 2012
Discussion open until: Jan 15, 2013
Published in print: Sep 1, 2013
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.