Autonomous Mowing—Improving Efficiency and Safety of Roadside Vegetation Control
Publication: Journal of Infrastructure Systems
Volume 16, Issue 3
Abstract
This paper discusses the use of autonomous mowers for application in highway vegetation control. In recent work by these writers, a unique autonomous mower testbed has been developed to prove the efficacy of such an approach. The testbed’s uniqueness comes from its relatively low cost and its new and accurate sensing method. The mowing performance is evaluated based on the consistency of consecutive mowing paths from actual outdoor testing. Then, a hypothetical implementation is used to evaluate the practicality of the system in California Department of Transportation (Caltrans) applications. Results show that autonomous mowers have the potential to significantly reduce Caltrans’ dependence on herbicide, improve worker and public safety, lead to enhanced levels of environmental quality, and decrease the operation’s costs.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The writers gratefully acknowledge the Division of Research and Innovation of the California, Department of Transportation for the support of this work through the Advanced Highway Maintenance and Construction Technology Research Center at the University of California, Davis.
References
Aono, T., Fujii, K., Hatsumoto, S., and Kamiya, T. (1998). “Positioning of vehicle on undulating ground using GPS and dead reckoning.” Proc., IEEE Int. Conf. on Robotics and Automation, Leuven, Belgium, 3443–3448.
Arsenault, A. (2007). “Implementation and validation of a low cost sensor array for autonomous roadside mowing.” MS thesis, Dept. of Mechanical and Aeronautical Engineering, Univ. of California–Davis, Davis, Calif.
Arsenault, A., Velinsky, S. A., and Lasky, T. A. (2010). “A low-cost sensor array and test platform for autonomous roadside mowing.” Trans. IEEE/ASME, J. Mechatronics, in press.
California Department of Transportation (Caltrans). (1992). Environmental Impact Report on Caltrans’ Vegetation Control Program, Jones & Stokes Associates, Inc., Sacramento, Calif.
California Department of Transportation (Caltrans). (1997). California roadsides: A new perspective, Jones & Stokes Associates, Inc., Sacramento, Calif.
California Department of Transportation (Caltrans). (2005a). Maintenance manual, Caltrans, Sacramento, Calif., Chap. C2.
California Department of Transportation (Caltrans). (2005b). Integrated Maintenance Management System (IMMS), Fiscal Year 2004/2005 Vegetation Control Plan Report, Sacramento, Calif.
California Department of Transportation (Caltrans). (2005c). Integrated maintenance management system (IMMS), fiscal year 2004/2005 C2 and E1 IMMS cost data, Sacramento, Calif.
Chandler, R. C., Meiszer, K. A., and Arroyo, A. A. (1999). “LawnShark: A new platform for autonomous mowing and navigation.” Florida Conf. on Recent Advances in Robotics, Univ. of Florida, Gainesville, Fla.
Clary, A. G. (1969). “The role of equipment in maintenance operations.” Highway Research News, 35, 44–58.
Darter, M. T., Lasky, T. A., and Ravani, B. (2007). “Transportation asset management and visualization using semantic models and Google Earth.” Transportation Research Record 2024, December, Transportation Research Board, Washington, D.C.
Dudek, G. (2000). Computational principles of mobile robotics, Cambridge University Press, Cambridge, England.
Hong, D., Velinsky, S. A., and Feng, X. (1999). “Verification of a wheeled mobile robot dynamic model and control ramifications.” J. Dyn. Syst., Meas., Control, 121(1), 58–63.
Kiriy, E. (2002). “A localization system for autonomous golf course mowers.” MS thesis, Dept. of Electrical and Computer Engineering, McGill Univ., Montreal.
Kiriy, E., and Buehler, M. (2002). “Three-state extended Kalman filter for mobile robot localization.” CIM Technical Rep. TR-CIM 05.07, McGill Univ., Montreal.
Kurth, D. (2004). “Range-only robot localization and SLAM with radio.” Technical Rep. CMU-RI-TR-04-29, Robotics Institute, Carnegie Mellon Univ., Pittsburgh.
Rizzoni, G. (2005). Principles and applications of electrical engineering, McGraw-Hill, New York.
Russell, S. J., and Norvig, P. (2005). Artificial intelligence: A modern approach, Prentice-Hall, Inc., Upper Saddle River, N.J.
Schworer, I. J. (2005). “Navigation and control of an autonomous vehicle.” MS thesis, Dept. of Electrical and Computer Engineering, Virginia Polytechnic Institute and State Univ., Blacksburg, Va.
Teeter-Balin, J. (2004). “Feasibility of alternative vegetation maintenance control technologies.” MS thesis, Dept. of Mechanical and Aeronautical Engineering, Univ. of California–Davis, Davis, Calif.
Wikipedia. (2007). “Geographic information system.” ⟨http://en.wikipedia.org/wiki/GIS⟩ (Oct. 24, 2007).
Zhang, Y., Velinsky, S. A., and Feng, X. (1997). “On the tracking control of differentially steered wheeled mobile robots.” J. Dyn. Syst., Meas., Control, 119(3), 455–461.
Information & Authors
Information
Published In
Copyright
© 2010 ASCE.
History
Received: Jun 15, 2009
Accepted: Oct 22, 2009
Published online: Aug 13, 2010
Published in print: Sep 2010
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.