Analytical Head Loss Equation of Center-Pivot Irrigation System
Publication: Journal of Irrigation and Drainage Engineering
Volume 147, Issue 7
Abstract
Enhancing water use efficiency is essential in irrigated agriculture owing to declining water resources, increasing population, growing water needs, and greater competition among water users. If properly designed and managed, with good operation and maintenance, a center-pivot irrigation system can have high water-application efficiency. One of the design factors for a center-pivot irrigation system is the hydraulic loss in the lateral pipe. In this study, an analytical relationship is presented as a series for calculating the hydraulic loss in the lateral pipe of a center-pivot irrigation system. Given the difficulty and complexity of using a mathematical series, the equation presented in this study and the equation developed by Anwar turn out to be general and asymptotic relations. The final relationships have 0.6% and 0.4% errors, respectively, relative to the series relationships. Due to the high accuracy and ease of use of the asymptotic relationship presented to calculate the hydraulic loss in the lateral pipe, it is recommended for use in designing center-pivot irrigation systems.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and code that support the findings of this study are available from the corresponding author upon reasonable request.
Acknowledgments
We are immensely grateful to Professor Abdolhossein Hoorfar (Professor Emeritus of Mathematics in the Department of Irrigation and Reclamation, University of Tehran, Tehran, Iran) for checking the relationships and Professor Gray P. Merkley (Emeritus Professor of Irrigation Engineering in the Department of Civil and Environmental Engineering, Utah State University, Logan, Utah, and Senior Supervising Engineer in Natural Resources Consulting Engineers, Fort Collins, Colorado) and Professor Vijay P. Singh (Professor of Water Engineering in the Department of Biological and Agricultural Engineering and Zachry Department of Civil Engineering, Texas A&M University, College Station, Texas) for his valuable comments on an early version of the manuscript, although any errors are ours alone.
References
Alazba, A. 2005. “Calculating F factor for center-pivots using simplified formula and modified Christiansen equation.” J. King Saud Univ. 17 (2): 85–99.
Alazba, A., M. Mattar, M. Elnesr, and M. Amin. 2011. “Field assessment of friction head loss and friction correction factor equations.” J. Irrig. Drain. Eng. 138 (2): 166–176. https://doi.org/10.1061/(ASCE)IR.1943-4774.0000387.
Anwar, A. A. 1999. “Friction correction factors for center-pivots.” J. Irrig. Drain. Eng. 125 (5): 280–286. https://doi.org/10.1061/(ASCE)0733-9437(1999)125:5(280).
Anwar, A. A. 2000. “Correction factors for center pivots with end guns.” J. Irrig. Drain. Eng. 126 (2): 113–118. https://doi.org/10.1061/(ASCE)0733-9437(2000)126:2(113).
Christiansen, J. 1942. Irrigation by sprinkling. California Agricultural Experimental Station Bulletin 670. Berkeley, CA: Univ. of California.
Chu, S. T., and D. L. Moe. 1972. “Hydraulics of a center pivot system.” Trans. ASAE 15 (4): 894–896.
Izquiel, A., P. Carrion, J. Tarjuelo, and M. Moreno. 2015. “Optimal reservoir capacity for centre pivot irrigation water supply: Maize cultivation in Spain.” Biosyst. Eng. 135 (Jul): 61–72. https://doi.org/10.1016/j.biosystemseng.2015.04.015.
Keller, J., and R. D. Bliesner. 1990. Sprinkler and trickle irrigation. New York: Van Nostrand Reinhold.
Lecina, S., R. Hill, and J. Barker. 2016. “Irrigation uniformity under different socio-economic conditions: Evaluation of centre pivots in Aragon (Spain) and Utah (USA).” Irrig. Drain. 65 (4): 549–558. https://doi.org/10.1002/ird.2031.
Marjang, N., G. Merkley, and M. Shaban. 2012. “Center-pivot uniformity analysis with variable container spacing.” Irrig. Sci. 30 (2): 149–156. https://doi.org/10.1007/s00271-011-0272-6.
Maroufpoor, E., A. Faryabi, H. Ghamarnia, and G. Y. Moshrefi. 2010. “Evaluation of uniformity coefficients for sprinkler irrigation systems under different field conditions in Kurdistan Province (northwest of Iran).” Soil Water Res. 5 (4): 139–145.
Maroufpoor, E., H. Sanikhani, S. Emamgholizadeh, and Ö. Kişi. 2018. “Estimation of wind drift and evaporation losses from sprinkler irrigation systems by different data-driven methods.” Irrig. Drain. 67 (2): 222–232. https://doi.org/10.1002/ird.2182.
Mohamed, A. Z., R. T. Peters, X. Zhu, and A. Sarwar. 2019. “Adjusting irrigation uniformity coefficients for unimportant variability on a small scale.” Agric. Water Manage. 213 (Mar): 1078–1083. https://doi.org/10.1016/j.agwat.2018.07.017.
Ortiz, J., J. De Juan, and J. Tarjuelo. 2010. “Analysis of water application uniformity from a centre pivot irrigator and its effect on sugar beet (Beta vulgaris L.) yield.” Biosyst. Eng. 105 (3): 367–379. https://doi.org/10.1016/j.biosystemseng.2009.12.007.
Reddy, J. M., and H. Apolayo. 1988. “Friction correction factor for center-pivot irrigation systems.” J. Irrig. Drain. Eng. 114 (1): 183–185. https://doi.org/10.1061/(ASCE)0733-9437(1988)114:1(183).
Scobey, F. C. 1930. The flow of water in riveted steel and analogous pipes. Washington, DC: USDA.
Steiner, J., E. Kanemasu, and D. Hasza. 1983. “Microclimatic and crop responses to center pivot sprinkler and to surface irrigation.” Irrig. Sci. 4 (3): 201–214. https://doi.org/10.1007/BF00285526.
Tabuada, M. A. 2014. “Friction head loss in center-pivot laterals with single diameter and multidiameter.” J. Irrig. Drain. Eng. 140 (10): 04014033. https://doi.org/10.1061/(ASCE)IR.1943-4774.0000755.
Tarjuelo, J. M., J. Montero, F. Honrubia, J. Ortiz, and J. Ortega. 1999. “Analysis of uniformity of sprinkle irrigation in a semi-arid area.” Agric. Water Manage. 40 (2–3): 315–331. https://doi.org/10.1016/S0378-3774(99)00006-2.
Undersander, D., T. Marek, and R. Clark. 1985. “Effect of nozzle type on runoff and yield of corn and sorghum under center pivot sprinkler systems.” Irrig. Sci. 6 (2): 107–116. https://doi.org/10.1007/BF00251559.
Valiantzas, J. D., and N. Dercas. 2005. “Hydraulic analysis of multidiameter center-pivot sprinkler laterals.” J. Irrig. Drain. Eng. 131 (2): 137–146. https://doi.org/10.1061/(ASCE)0733-9437(2005)131:2(137).
Williams, G. S., and A. Hazen. 1933. Hydraulic tables. 3rd ed. New York: Wiley.
Zhu, X., T. Peters, and H. Neibling. 2016. “Hydraulic performance assessment of LESA at low pressure.” Irrig. Drain. 65 (4): 530–536. https://doi.org/10.1002/ird.1982.
Information & Authors
Information
Published In
Copyright
© 2021 American Society of Civil Engineers.
History
Received: Nov 20, 2020
Accepted: Mar 5, 2021
Published online: May 13, 2021
Published in print: Jul 1, 2021
Discussion open until: Oct 13, 2021
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.