Direct Solutions for Uniform Flow Parameters of Wide Rectangular and Triangular Sections
This article has a reply.
VIEW THE REPLYThis article has a reply.
VIEW THE REPLYThis article has a reply.
VIEW THE REPLYThis article has a reply.
VIEW THE REPLYPublication: Journal of Irrigation and Drainage Engineering
Volume 147, Issue 7
Abstract
One of the general problems encountered in the design of open channels is the computation of normal depth, head loss, and discharge. A wide rectangular section is commonly used in natural streams and surface/sheet flow in watersheds and the triangular section is commonly used for irrigation and roadside channels. The normal depth or head loss is traditionally solved using a trial (iterative) procedure. This paper develops two direct solutions for the head loss and normal depth for the wide rectangular and triangular open channel sections. The explicit equations for the normal depths are developed in terms of fast converging power series. The maximum errors of the proposed explicit formulas are 0.65% and 2% for triangular and wide rectangular channels, respectively, compared with 5% and 8% for the existing methods.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
No data, model, or code were generated or used during the study.
Acknowledgments
The support provided by the General Directorate for Scientific Research and Technological Development, Algeria, is acknowledged.
References
Achour, B., and A. Bejaoui. 2006a. “Contribution au calcul de la profondeur normale dans un canal rectangulaire.” Larhyss J. 5: 139–147.
Achour, B., and A. Bejaoui. 2006b. “Discussion of ‘Exact solutions for normal depth problem’ by P. K. Swameeand, and P. N. Rathie.” J. Hydraul. Res. 44 (5): 715–717. https://doi.org/10.1080/00221686.2006.9521721.
ASCE. 1963. “Friction factors in open channels.” J. Hydraul. Div. 89 (2): 97–143. https://doi.org/10.1061/JYCEAJ.0000865.
Bijankhan, M., and S. Kouchakzadeh. 2011. “Egg-shaped cross section: Uniform flow directsolution and stability identification.” Flow Meas. Instrum. 22 (6): 511–516. https://doi.org/10.1016/j.flowmeasinst.2011.09.002.
Brkic, D. 2011. “Review of explicit approximations to the Colebrook relation for flow friction.” J. Pet. Sci. Eng. 77 (1): 34–48. https://doi.org/10.1016/j.petrol.2011.02.006.
Chow, V. T. 1959. Open channel hydraulics. New York: McGraw-Hill Book.
Christensen, B. A. 1984. “Discussion of ‘Flow velocities in pipelines’, by Richard R. Pomeroy.” J. Hydraul. Eng. 110 (10): 1510–1512. https://doi.org/10.1061/(ASCE)0733-9429(1984)110:10(1510).
Elhakeem, M. 2017. “Explicit solution for flow depth in open channels of trapezoidal cross-sectional.” J. Irrig. Drain. Eng. 143 (7): 04017011. https://doi.org/10.1061/(ASCE)IR.1943-4774.0001179.
Ferro, V., and M. Sciacca. 2016. “Explicit equations for uniform flow depth.” J. Irrig. Drain. Eng. 143 (5): 06016016. https://doi.org/10.1061/(ASCE)IR.1943-4774.0001152.
FHWA (Federal Highway Administration). 2005. Design of roadside channels with flexible linings. HWA-NHI-05-114. Washington, DC: FHWA.
Hager, W. H. 1989. “Discussion of ‘Non-circular sewer design’ by P. K.Swamee, R. Bhargava, and A. K.Sharma.” J. Environ. Eng. 115 (1): 274–276. https://doi.org/10.1061/(ASCE)0733-9372(1989)115:1(274).
Hager, W. H., and A. J. Schleiss. 2009. Constructions hydrauliques—Ecoulements stationnaires (Hydraulics structures—Steady flows). 2nd ed. [In French.] Lausanne, Switzerland: Presses Polytechniques et Universitaires Romandes.
Han, Y-C., and M. S. Easa. 2016. “Superior cubic channel section and analytical solution of best hydraulic properties.” Flow Meas. Instrum. 50 (Aug): 169–177. https://doi.org/10.1016/j.flowmeasinst.2016.06.019.
Han, Y-C., and S. M. Easa. 2018. “Exact solution of optimum hydraulic power-law section with general exponent parameter.” J. Irrig. Drain. Eng. 144 (12): 04018035. https://doi.org/10.1061/(ASCE)IR.1943-4774.0001358.
Lamri, A. A., S. M. Easa, and M. T. Bouziane. 2020. “Stability criterion for uniform flow in open channel cross sections with different shapes.” J. Irrig. Drain. Eng. 146 (11): 06020010. https://doi.org/10.1061/(ASCE)IR.1943-4774.0001512.
Liu, Z., and J. Wang. 2013. “Equations for critical and normal depths of city-gate sections.” ICE–Water Manage. 166 (4): 199–206.
Perez, M. A., X. Fang, and C. G. Butler. 2015. “Compute critical and normal depths of arch and elliptical pipes.” J. Irrig. Drain. Eng. 141 (9): 06015001. https://doi.org/10.1061/(ASCE)IR.1943-4774.0000884.
Raikar, R. V., M. S. Shiva, and G. K. Vishwanadh. 2010. “Normal and critical depth computations for egg-shaped conduit sections.” Flow Meas. Instrum. 21 (3): 367–372. https://doi.org/10.1016/j.flowmeasinst.2010.04.007.
Srivastava, R. 2006. “Discussion of ‘Exact solutions for normal depth problem’ by P.K Swamee, and P.N Rathie.” J. Hydraul. Res. 133 (5): 427–428. https://doi.org/10.1080/00221686.2006.9521694.
Swamee, P. K. 1994. “Normal depth equations for irrigation canals.” J. Irrig. Drain. Eng. 120 (5): 942–948. https://doi.org/10.1061/(ASCE)0733-9437(1994)120:5(942).
Swamee, P. K., and P. N. Rathie. 2004. “Exact solution for normal depth problem.” J. Hydraul. Res. 42 (5): 543–550. https://doi.org/10.1080/00221686.2004.9641223.
Swamee, P. K., and P. N. Rathie. 2005. “Exact equations for critical depth in a trapezoidal canal.” J. Irrig. Drain. Eng. 131 (5): 474–476. https://doi.org/10.1061/(ASCE)0733-9437(2005)131:5(474).
Swamee, P. K., and P. N. Rathie. 2012. “Normal depth equations for wide rectangular and triangular open channel sections involving Lamberts W function.” J. Hydraul. Eng. 18 (3): 252–257. https://doi.org/10.1080/09715010.2012.730660.
Swamee, P. K., and P. N. Rathie. 2016. “Normal depth equations for parabolic open sections.” J. Irrig. Drain. Eng. 142 (6): 06016003. https://doi.org/10.1061/(ASCE)IR.1943-4774.0001010.
Thijsse, J. T. 1949. “Formulae for the friction head loss along conduit walls under turbulent flow.” In Proc., 3rd Meeting, Int. Association for Hydraulic Structures Research. Grenoble, France: International Association for Hydraulic Structures Research.
Vatankhah, A. R. 2013. “Explicit solutions for critical and normal depthsintrapezoidal and parabolic open channels.” Ain Shams Eng. J. 4 (1): 17–23. https://doi.org/10.1016/j.asej.2012.05.002.
Vatankhah, A. R. 2015a. “Critical and normal depths in semi-elliptical channels.” J. Irrig. Drain. Eng. 141 (10): 06015002. https://doi.org/10.1061/(ASCE)IR.1943-4774.0000888.
Vatankhah, A. R. 2015b. “Direct solutions for normal depth in parabolic and rectangular open channels using asymptotic matching technique.” Flow Meas. Instrum. 46 (Dec): 66–71. https://doi.org/10.1016/j.flowmeasinst.2015.10.004.
Vatankhah, A. R. 2015c. “Normal depth in power-law channels.” J. Hydrol. Eng. 20 (7): 06014008. https://doi.org/10.1061/(ASCE)HE.1943-5584.0001083.
Vatankhah, A. R., and S. M. Easa. 2011. “Explicit solutions for critical and normaldepths in channels with different shapes.” Flow Meas. Instrum. 22 (1): 43–49. https://doi.org/10.1016/j.flowmeasinst.2010.12.003.
Whittaker, E. T., and G. N. Watson. 1915. A course of modern analysis. 2th Ed. Cambridge, UK: Cambridge University Press.
Zeghadnia, L., J. L. Robert, and A. Bachir. 2019. “Explicit solutions for turbulent flow friction factor: A review, assessment and approaches classification.” Ain Shams Eng. J. 10 (1): 243–252. https://doi.org/10.1016/j.asej.2018.10.007.
Information & Authors
Information
Published In
Copyright
© 2021 American Society of Civil Engineers.
History
Received: Jun 29, 2020
Accepted: Feb 24, 2021
Published online: May 14, 2021
Published in print: Jul 1, 2021
Discussion open until: Oct 14, 2021
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Ahmed A. Lamri, Said M. Easa, Closure to “Explicit Solution for Pipe Diameter Problem Using Lambert -Function”, Journal of Irrigation and Drainage Engineering, 10.1061/JIDEDH.IRENG-10141, 149, 7, (2023).
- Ahmed A. Lamri, Said M. Easa, Lambert W-function Solution for Uniform Flow Depth Problem, Water Resources Management, 10.1007/s11269-022-03167-4, 36, 8, (2653-2663), (2022).