Abstract
This paper presents the derivation of an analytical method for identifying the stability of uniform flow in three open channel sections (rectangular, parabolic, and circular). Using a dimensionless relative slope factor, a general equation for the prediction of stability thresholds for the occurrence of roll waves for each cross-section shape was developed, enabling the flow stability zones to be classified. The derivation is predicated based on a combination of the Vedernikov number and the logarithmic law of resistance, which involves significant resistance parameters. The proposed method was verified using a numerical example and actual measurements. It is hoped that the presented method, which provides a direct solution for the stability criteria of uniform flow, will be useful in open channel design.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, model, and code generated or used during the study appear in the published article.
Acknowledgments
The authors are grateful to two anonymous reviewers for their thorough and most helpful comments. The support provided by the General Directorate for Scientific Research and Technological Development, Algeria, is acknowledged.
References
Bijankhan, M., and S. Kouchakzadeh. 2011. “Egg-shaped cross section: Uniform flow and direct solution stability identification.” Flow Meas. Instrum. 22 (6): 511–516. https://doi.org/10.1016/j.flowmeasinst.2011.09.002.
Chen, C.-L. 1995. “Free stability criterion as affected by velocity distribution.” J. Hydraul. Eng. 121 (10): 736–743. https://doi.org/10.1061/(ASCE)0733-9429(1995)121:10(736).
Chow, V. T. 1959. Open channel hydraulics. New York: McGraw-Hill.
Christensen, B. A. 1984. “Discussion of ‘Flow velocities in pipelines,’ by R. R. Pomeroy.” J. Hydraul. Eng. 110 (10): 1510–1512. https://doi.org/10.1061/(ASCE)0733-9429(1984)110:10(1510).
Committee on Hydromechanics of the Hydraulic Division of ASCE. 1963. “Friction factors in open channels. Progress report of task force on friction factors in open channels.” J. Hydraul. Div. 89 (2): 97–143.
Di Cristo, C., M. Iervolino, A. Vacca, and B. Zanuttigh. 2008. “Minimum channel length for roll-wave generation.” J. Hydraul. Res. 46 (1): 73–79. https://doi.org/10.1080/00221686.2008.9521844.
Di Cristo, C., M. Iervolino, A. Vacca, and B. Zanuttigh. 2010. “Influence of relative roughness and Reynolds number on the roll waves special evolution.” J. Hydraul. Eng. 136 (1): 24–33. https://doi.org/10.1061/(ASCE)HY.1943-7900.0000139.
Escoffier, F. F., and M. B. Boyd. 1962. “Stability aspects of flow in open channels.” J. Hydraul. Eng. Div. 88 (6): 145–166.
Ferro, V., and M. Sciacca. 2016. “Explicit equations for uniform flow depth.” J. Irrig. Drain. Eng. 143 (5): 06016016. https://doi.org/10.1061/(ASCE)IR.1943-4774.0001152.
Hager, W. H. 2010. Wastewater hydraulics: Theory and practice. Berlin: Springer.
Hager, W. H., and C. Gisonni. 2005. “Supercritical flow in sewer manholes.” J. Hydraul. Res. 43 (6): 660–667. https://doi.org/10.1080/00221680509500385.
Iwasa, Y. 1954. “The criterion for instability of steady uniform flow in open channels.” Mem. Facil. Eng. Kyoto Univ., Jpn 16 (4): 264–275.
Julien, P. Y., and D. M. Hartley. 1986. “Formation of roll waves in laminar sheet flow.” J. Hydraul. Res. 24 (1): 5–17. https://doi.org/10.1080/00221688609499329.
Koulegan, G. H., and G. W. Patternson. 1940. “A criterion for instability of flow in steep channels.” Trans. Am. Geophys. Union. 21 (2): 594–596. https://doi.org/10.1029/TR021i002p00594.
Kouloseus, G. H., and G. Davidian. 1966. “Free surface instability correlations.” In Geological survey water supply paper-C. Washington, DC: US Dept. of the Interior, US Government Printing Office.
Lamri, A. A. 2020. “Discussion of ‘Approximate analytical solutions for the Colebrook equation’ by A. R. Vatankhah.” J. Hydraul. Eng. 146 (2): 07019012. https://doi.org/10.1061/(ASCE)HY.1943-7900.0001668.
Mayer, P. G. 1961. “Roll waves and slug flows in inclined open channels.” Trans. Am. Soc. Civ. Eng. 126 (1): 505–534.
Rosso, M., M. Schiara, and J. Berlamont. 1990. “Flow stability and friction factor in rough channels.” J. Hydraul. Eng. 116 (9): 1109–1118. https://doi.org/10.1061/(ASCE)0733-9429(1990)116:9(1109).
Srivastava, R. 2006. “Discussion of ‘Exact solutions for normal depth problem’ by P. K. Swamee and P. N. Rathie.” J. Hydraul. Res. 44 (3): 427–428. https://doi.org/10.1080/00221686.2006.9521694.
Swamee, P. K., and P. N. Rathie. 2016. “Normal depth equations for parabolic open sections.” J. Irrig. Drain. Eng. 142 (6): 06016003. https://doi.org/10.1061/(ASCE)IR.1943-4774.0001010.
Vatankhah, A. R., and S. M. Easa. 2010. “Explicit solutions for critical and normal depths in channels with different shapes.” Flow Meas. Instrum. 22 (1): 43–49. https://doi.org/10.1016/j.flowmeasinst.2010.12.003.
Vedernikov, V. V. 1945. “Conditions at the front of a translation wave distributing a steady motion of a real fluid.” Comptes Rendus (Doklady) de l’academie des sciences de l’U.R.S.S. 48 (4): 239–242.
Information & Authors
Information
Published In
Copyright
© 2020 American Society of Civil Engineers.
History
Received: Feb 22, 2020
Accepted: Jul 10, 2020
Published online: Sep 7, 2020
Published in print: Nov 1, 2020
Discussion open until: Feb 7, 2021
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.