Assessing Malcherek’s Outflow Theory to Deduce the Theoretical Stage-Discharge Formula for Overflow Structures
Publication: Journal of Irrigation and Drainage Engineering
Volume 144, Issue 11
Abstract
New theoretical stage-discharge relationships of different sharp-crested weirs were developed in this study using the new Malcherek’s outflow theory. Although Torricelli’s outflow theory is basically used to estimate the stage-discharge formula for overflow structures, it is indicated in this work that the stage-discharge curve obtained by Malcherek’s outflow theory improves the theoretical estimation significantly. The new theoretical stage-discharge formula requires estimating the momentum correction factor () using velocity profiles instead of using an unknown discharge coefficient. Accordingly, for the rectangular weir, it was indicated that the available velocity profiles over the weir crest could be used to estimate the momentum correction factor and associated stage-discharge curve accurately. Moreover, the optimum -values for rectangular, triangular, and circular overflow structures were suggested to be calculated using indirect prediction of the momentum correction factors by introducing the stage-discharge data points available in the literature. The performances of different stage-discharge approaches were evaluated and practical advice was suggested. It was found that the proposed stage-discharge curves were in an excellent agreement with the observed values.
Get full access to this article
View all available purchase options and get full access to this article.
References
Afzalimehr, H., and S. Bagheri. 2009. “Discharge coefficient of sharp-crested weirs using potential flow.” J. Hydraul. Res. 47 (6): 820–823. https://doi.org/10.3826/jhr.2009.3609.
Aydin, I., A. B. Altan-sakarya, and C. Sisman. 2011. “Discharge formula for rectangular sharp-crested weirs.” Flow Meas. Instrum. 22 (2): 144–151. https://doi.org/10.1016/j.flowmeasinst.2011.01.003.
Azimi, A. H., and N. Rajaratnam. 2009. “Discharge characteristics of weirs of finite crest length.” J. Hydraul. Eng. 135 (12): 1081–1085. https://doi.org/10.1061/(ASCE)HY.1943-7900.0000117.
Azimi, A. H., N. Rajaratnam, and D. Z. Zhu. 2013. “Discharge characteristics of weirs of finite crest length with upstream and downstream ramps.” J. Irrig. Drain. Eng. 139 (1): 75–83. https://doi.org/10.1061/(ASCE)IR.1943-4774.0000519.
Azimi, A. H., N. Rajaratnam, and D. Z. Zhu. 2014. “Submerged flows over rectangular weirs of finite crest length.” J. Irrig. Drain. Eng. 140 (5): 06014001. https://doi.org/10.1061/(ASCE)IR.1943-4774.0000728.
Azimi, A. H., N. Rajaratnam, and D. Z. Zhu. 2016. “Water surface characteristics of submerged rectangular sharp-crested weirs.” J. Hydraul. Eng. 142 (5): 06016001. https://doi.org/10.1061/(ASCE)HY.1943-7900.0001110.
Bos, M. G. 1989. Discharge measurement structures. Wageningen: International Institute for Land Reclamation and Improvement.
Ferro, V., and I. Aydin. 2018. “Testing the outflow theory of Malcherek by slit weir data.” Flow Meas. Instrum. 59: 114–117. https://doi.org/10.1016/j.flowmeasinst.2017.12.003.
Gharahjeh, S., I. Aydin, and A. B. Altan-Sakarya. 2015. “Weir velocity formulation for sharp-crested rectangular weirs.” Flow Meas. Instrum. 41: 50–56. https://doi.org/10.1016/j.flowmeasinst.2014.10.018.
Göğüş, M., Z. Defne, and V. Özkandemir. 2006. “Broad-crested weirs with rectangular compound cross sections.” J. Irrig. Drain. Eng. 132 (3): 272–280. https://doi.org/10.1061/(ASCE)0733-9437(2006)132:3(272).
Greve, F. V. 1932. “Flow of water through circular, parabolic, and triangular vertical notch weirs.” Eng. Bull. 40 (2): 37–60.
Henderson, F. M. 1966. Open channel flow. New York: Macmillan.
Malcherek, A. 2016. “History of the Torricelli principle and a new outflow theory.” J. Hydraul. Eng. 142 (11): 02516004. https://doi.org/10.1061/(ASCE)HY.1943-7900.0001232.
Mehrzad, M., S. Kouchakzadeh, and M. Bijankhan. 2015. “Discussion of ‘Discharge coefficient analysis for triangular sharp-crested weirs using low-speed photographic technique’ by C. Bautista-Capetillo, O. Robles, H. Júnez-Ferreira, and E. Playán.” J. Irrig. Drain. Eng. 141 (8): 07014066. https://doi.org/10.1061/(ASCE)IR.1943-4774.0000789.
Ramamurthy, A. S., and N.-D. Vo. 1993. “Characteristics of circular-crested weir.” J. Eng. Mech. 119 (9): 1055–1062. https://doi.org/10.1061/(ASCE)0733-9429(1993)119:9(1055).
Staus, A. 1930. “Zur berechnung kreisrunder űberfälle.” Waaerkraft und Wasserwirtschaft 25 (1): 122–123.
Staus, A. 1931. “Der beiwert kreisrunder űberfälle.” Waaerkraft und Wasserwirtschaft 26 (4): 42–44.
Staus, A. 1937. “Der kreisűberfälle.” Waaerkraft und Wasserwirtschaft 32 (10–11): 116–119.
Staus, A. 1939. “Der kreisűberfäll und sein beiwert.” Waaerkraft und Wasserwirtschaft 34 (7–8): 79–83.
Stevens, J. C. 1957. “Flow through circular weir.” J. Hydraul. Div. 83 (6): 1–24.
Te Chow, V. 1959. Open channel hydraulics. New York: McGraw-Hill.
Torricelli, E. 1644. Opera geometrica. Florence, Italy: Amatoris Masse & Laurentij de Landis.
Tsung, S., J. Lai, and D.-L. Young. 2014. “Velocity distribution and discharge calculation at a sharp-crested weir.” Paddy Water Environ. 12 (1): 203–212. https://doi.org/10.1007/s10333-013-0378-y.
Vatankhah, A. R. 2010. “Flow measurement using circular sharp- crested weirs.” Flow Meas. Instrum. 21 (2): 118–122. https://doi.org/10.1016/j.flowmeasinst.2010.01.006.
Information & Authors
Information
Published In
Copyright
©2018 American Society of Civil Engineers.
History
Received: Jul 24, 2017
Accepted: Jun 29, 2018
Published online: Sep 7, 2018
Published in print: Nov 1, 2018
Discussion open until: Feb 7, 2019
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.