Hydrodynamics of Rectangular Broad-Crested Porous Weirs
This article has a reply.
VIEW THE REPLYThis article has a reply.
VIEW THE REPLYPublication: Journal of Irrigation and Drainage Engineering
Volume 144, Issue 10
Abstract
In this study, the hydrodynamics of rectangular broad-crested porous weirs were numerically simulated using a nonlinear model between the pressure gradient and flow velocity through the porous medium. Computational fluid dynamics (CFD) analysis has been performed and renormalized group (RNG) model is used as the turbulence closure for Reynolds-averaged Navier-Stokes (RANS) equations. Solid and porous weirs with various properties were examined, and the drag coefficients of the porous weirs in the nonlinear flow resistance model were determined using sensitivity analysis. A logarithmic equation to determine the drag coefficient directly as a function of the hydraulic permeability is presented. By performing three-dimensional (3D) numerical simulations for a wide range of the approach discharge for different porous weir models, the discharge coefficient is described as a piecewise function of related parameters, such as head over the weir, porosity, and the grain diameter of the porous weir. Moreover, for the simulated scenarios, ratios of water passing through and over the weir are determined; consequently, new equations for the discharge ratio are developed. Finally, complex flow features over and through the different porous weirs have been expounded using developed discharge ratio curves.
Get full access to this article
View all available purchase options and get full access to this article.
References
Carman, P. C. 1937. “Fluid flow through granular beds.” Chem. Eng. Res. Des. 75 (Dec): S32–S48. https://doi.org/10.1016/S0263-8762(97)80003-2.
Chanson, H. 2004. Hydraulics of open channel flow. Oxford, UK: Butterworth-Heinemann.
Flow-3D. 2010. User manual version 9.4. Santa Fe, FL: Flow Science.
Forchheimer, P. 1901. “Wasserbewegung durch boden.” Z. Ver. Deutsch. Ing. 45: 1782–1788.
Gonzalez, C. A., and H. Chanson. 2007. “Experimental measurements of velocity and pressure distributions on a large broad-crested weir.” Flow Meas. Instrum. 18 (3): 107–113. https://doi.org/10.1016/j.flowmeasinst.2007.05.005.
Hager, W. H., and M. Schwalt. 1994. “Broad-crested weir.” J. Irrig. Drain. Eng. 120 (1): 13–26. https://doi.org/10.1061/(ASCE)0733-9437(1994)120:1(13).
Johnson, M. C. 2000. “Discharge coefficient analysis for flat-topped and sharp-crested weirs.” Irrig. Sci. 19 (3): 133–137. https://doi.org/10.1007/s002719900009.
Kells, J. A. 1993. “Spatially varied flow over rockfill embankments.” Can. J. Civ. Eng. 20 (5): 820–827. https://doi.org/10.1139/l93-107.
Leu, J. M., H. C. Chan, and M. S. Chu. 2008. “Comparison of turbulent flow over solid and porous structures mounted on the bottom of a rectangular channel.” Flow Meas. Instrum. 19 (6): 331–337. https://doi.org/10.1016/j.flowmeasinst.2008.05.001.
Lisle, T. E. 1989. “Sediment transport and resulting deposition in spawning gravels, north coastal California.” Water Resour. Res. 25 (6): 1303–1319. https://doi.org/10.1029/WR025i006p01303.
Michioku, K., S. Maeno, T. Furusawa, and M. Haneda. 2005. “Discharge through a permeable rubble mound weir.” J. Hydraul. Eng. 131 (1): 1–10. https://doi.org/10.1061/(ASCE)0733-9429(2005)131:1(1).
Michioku, K., K. Takehara, and T. Etoh. 2007. “An experimental study on flow field in and around rubble mound river structures.” J. Hydros. Hydraul. Eng. 25 (2): 37–45.
Mohamed, H. I. 2010. “Flow over gabion weirs.” J. Irrig. Drain. Eng. 136 (8): 573–577. https://doi.org/10.1061/(ASCE)IR.1943-4774.0000215.
Mohammadpour, R., A. A. Ghani, and H. M. Azamathulla. 2013. “Numerical modeling of 3D flow on porous broad crested weirs.” Appl. Math. Model. 37 (22): 9324–9337. https://doi.org/10.1016/j.apm.2013.04.041.
Mueller, M., J. Pander, R. Wild, T. Lueders, and J. Geist. 2013. “The effects of stream substratum texture on interstitial conditions and bacterial biofilms: Methodological strategies.” Limnologica 43 (2): 106–113. https://doi.org/10.1016/j.limno.2012.08.002.
Roache, P. J. 1994. “Perspective: A method for uniform reporting of grid refinement studies.” J. Fluid Eng. 116 (3): 405–413. https://doi.org/10.1115/1.2910291.
Salmasi, F., A. Abbaspour, and H. Ahmadi. 2016. “Determination of discharge coefficient in gabion weirs at free and submerged condition.” [In Farsi.] Water Soil Sci. 26 (1): 115–127.
Sargison, J. E., and A. Percy. 2009. “Hydraulics of broad-crested weirs with varying side slopes.” J. Irrig. Drain. Eng. 135 (1): 115–118. https://doi.org/10.1061/(ASCE)0733-9437(2009)135:1(115).
Urumovic, K., Sr. 2016. “The referential grain size and effective porosity in the Kozeny-Carman model.” Hydrol. Earth Syst. Sci. 20 (5): 1669–1689. https://doi.org/10.5194/hess-20-1669-2016.
Vafai, K. 2000. Handbook of porous media. Abingdon, UK: Taylor & Francis.
Venkataraman, P., and P. R. M. Rao. 1998. “Darcian, transitional, and turbulent flow through porous media.” J. Hydraul. Eng. 124 (8): 840–846. https://doi.org/10.1061/(ASCE)0733-9429(1998)124:8(840).
Xia, C., and Y. C. Jin. 2007. “Multilayer depth-averaged flow model with implicit interfaces.” J. Hydraul. Eng. 133 (10): 1145–1154. https://doi.org/10.1061/(ASCE)0733-9429(2007)133:10(1145).
Zachoval, Z., M. Knéblová, L. Roušar, J. Rumann, and J. Šulc. 2014. “Discharge coefficient of a rectangular sharp-edged broad-crested weir.” J. Hydrol. Hydromech. 62 (2): 145–149. https://doi.org/10.2478/johh-2014-0014.
Information & Authors
Information
Published In
Copyright
©2018 American Society of Civil Engineers.
History
Received: May 2, 2017
Accepted: Apr 17, 2018
Published online: Jul 23, 2018
Published in print: Oct 1, 2018
Discussion open until: Dec 23, 2018
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.