Stage-Discharge Prediction for Converging Compound Channels with Narrow Floodplains
Publication: Journal of Irrigation and Drainage Engineering
Volume 143, Issue 8
Abstract
Momentum transfer between a main channel and side floodplains tends to increase the floodplain shear and decrease the main channel shear. The increase and decrease in shear are greatly influenced when a compound channel has nonprismatic floodplains. In converging compound channels, water flow on the floodplain crosses over water flow in the main channel, resulting in increased interactions and momentum exchanges. An experimental analysis concerning the distribution of shear stress in the main channel and the floodplain for both prismatic and nonprismatic compound channels under different overbank flow conditions are performed. New equations are developed for predicting boundary shear stress distribution for a compound channel with the nonprismatic flood plain. Using these expressions the stage-discharge relationships for both prismatic and nonprismatic compound channels of lower width ratios are successfully estimated. The efficiency of the models is verified by applying natural river data sets.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
We acknowledge thankfully the support from the National Institute of Tehnology, Rourkela and the UGC UKIERI Research Project (ref no UGC-2013 14/017) for carrying out the experimental research work in the Hydraulics laboratory at NITR.
References
Bousmar, D., Wilkin, N., Jacquemart, J. H., and Zech, Y. (2004). “Overbank flow in symmetrically narrowing floodplains.” J. Hydraul. Eng., 305–312.
Bousmar, D., and Zech, Y. (1999). “Momentum transfer for practical flow computation in the compound channel.” J. Hydraul. Eng., 696–706.
Chow, V. T. (1959). Open-channel hydraulics, McGraw-Hill Book Co., Inc., New York.
Khatua, K. K., and Patra, K. C. (2007). “Boundary shear stress distribution in compound open channel flow.” J. Hydraul. Eng., 13(3), 39–54.
Khatua, K. K., Patra, K. C., and Mohanty, P. K. (2012). “Stage-discharge prediction for straight and smooth compound channels with wide floodplains.” J. Hydraul. Eng., 93–99.
Knight, D. W., and Demetriou, J. D. (1983). “Flood plain and main channel flow interaction.” J. Hydraul. Eng., 1073–1092.
Knight, D. W., and Hamed, M. E. (1984). “Boundary shear in symmetrical compound channels.” J. Hydraul. Eng., 1412–1430.
Martin, L. A., and Myers, W. RC. (1991). “Measurement of overbank flow in a compound river channel.” Proc. Inst. Cio. Eng., 91(4), 645–657.
Mohanty, K. P., Khatua, K. K., and Dash, S. S. (2014). “Flow prediction in two stage wide compound channels.” J. Hydraul. Eng., 20(2), 151–160.
Myers, W. R. C., and Lynness, J. F. (1990). “Flow resistance in rivers with floodplains.”, Univ. of Ulster, Coleraine, U.K.
Naik, B., and Khatua, K. K. (2016). “Boundary shear stress distribution for a converging compound channel.” J. Hydraul. Eng., 22(2), 212–219.
Patel, V. C. (1965). “Calibration of the Preston tube and limitations on its use in pressure gradients.” J. Fluid Mech., 23(1), 185–208.
Proust, S., Rivière, N., Bousmar, D., Paquier, A., Zech, Y., and Morel, R. (2006). “Flow in the compound channel with abrupt floodplain contraction.” J. Hydraul. Eng., 958–970.
Rezaei, B. (2006). “Overbank flow in compound channels with prismatic and non-prismatic floodplains.” Ph.D. thesis, Univ. of Birmingham, Birmingham, U.K.
Sellin, R. H. J. (1964). “A laboratory investigation of the interaction between the flow in the channel of a river and that over its flood plain.” La Houilte Blanche, 7(7), 793–802.
Information & Authors
Information
Published In
Copyright
©2017 American Society of Civil Engineers.
History
Received: May 16, 2016
Accepted: Dec 13, 2016
Published online: Mar 27, 2017
Published in print: Aug 1, 2017
Discussion open until: Aug 27, 2017
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.