Assessment of the Ability of a Volume of Fluid Model to Reproduce the Efficiency of a Continuous Transverse Gully with Grate
Publication: Journal of Irrigation and Drainage Engineering
Volume 142, Issue 10
Abstract
This paper deals with the numerical investigation of the drainage efficiency of a continuous transverse gully with the grate’s slots aligned in the flow direction and compared with experimental data sets. The gully efficiency attained with a three-dimensional (3D) numerical model is compared and validated against experimental data. The numerical simulations are performed using a computational fluid dynamics volume of fluid solver. Different slopes, from 0 to 10%, and a wide range of drainage flows, from 6.67 to , are simulated. The linear relation between Froude number and efficiency of the gully is in agreement to the one experimentally obtained.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors would like to acknowledge the financing through FCT (Fundação para a Ciência e Tecnologia, IP—Portuguese Foundation for Science and Technology) through projects PTDC/AAC-AMB/101197/2008, PTDC/ECM/105446/2008 and UID/MAR/04292/2013. Pedro Lopes was financed by FCT, through the Ph.D. scholarship Grant SFRH/BD/85783/2012, subfinanced by MEC (Portuguese Ministry of Education and Science) and FSE (European Social Fund), under the programs POPH/QREN (Human Potential Operational Programme from National Strategic Reference Framework) and POCH (Human Capital Operational Programme) from Portugal2020. The computational time spent on the Centaurus Cluster of the Laboratory for Advanced Computing at University of Coimbra is also acknowledged.
References
Begum, S., Rasul, M. G., Brown, R. J., Subaschandar, N., and Thomas, P. (2011). “An experimental and computational investigation of performance of green gully for reusing stormwater.” J. Water Resuse Desalin., 1 (2), 99–112.
Bennett, P. R., Stovin, V. R., and Guymer, I. (2011). “Improved CFD simulation approaches for manhole mixing investigations.” 12th Int. Conf. on Urban Drainage (ICUD12), IWA Publishing, London, 1–8.
Berberović, E., van Hinsberg, N. P., Jakirlić, S., Roisman, I., and Tropea, C. (2009). “Drop impact onto a liquid layer of finite thickness: Dynamics of the cavity evolution.” Phys. Rev. E, 79(3), 1–15.
Brackbill, J. U., Kothe, D. B., and Zemach, C. (1991). “A continuum method for modeling surface tension.” J. Comput. Phys., 100(2), 335–354.
Carvalho, R. F., and Leandro, J. (2012). “Hydraulic characteristics of a drop square manhole with a downstream control gate.” J. Irrig. Drain. Eng., 569–576.
Carvalho, R. F., Leandro, J., David, L. M., Martins, R., and Melo, N. (2011). “Numerical research of the inflow into different gullies outlets.” Computing and control for the water industry, Exeter, U.K.
Carvalho, R. F., Leandro, J., Martins, R., and Lopes, P. (2012). “Numerical study of the flow behaviour in a gully.” 4th IAHR Int. Symp. on Hydraulic Structures, APRH Publishing, Lisbon, Portugal.
Comport, B. C., Cox, A. L., and Thornton, C. I. (2012). “Performance assessment of grate inlets for highway median drainage.” Urban Drainage and Flood Control District, Colorado State Univ., CO.
Comport, B. C., and Thornton, C. I. (2009). “Hydraulic efficiency of grate and curb inlets for urban storm drainage.” Urban Drainage and Flood Control District, Colorado State Univ., CO.
Djordjević, S., et al. (2013). “Experimental and numerical investigation of interactions between above and below ground drainage systems.” Water Sci. Technol., 67(3), 535–542.
Djordjević, S., Prodanović, D., Maksimović, C., Ivetić, M., and Savić, D. A. (2005). “SIPSON-simulation of interaction between pipe flow and surface overland flow in networks.” Water Sci. Technol., 52(5), 275–283.
FHWA. (1984). “Drainage of highway pavements—HEC12.”, Washington, DC.
FHWA. (2001). “Urban drainage design manual—HEC22.”, Washington, DC.
Gómez, M., and Russo, B. (2009). “Hydraulic efficiency of continuous transverse grates for paved areas.” J. Irrig. Drain. Eng., 225–230.
Granata, F., de Marinis, G., and Gargano, R. (2014). “Flow-improving elements in circular drop manholes.” J. Hydraul. Res., 1–9.
Gupta, H., Sorooshian, S., and Yapo, P. (1999). “Status of automatic calibration for hydrologic models: Comparison with multilevel expert calibration.” J. Hydrol. Eng., 135–143.
Hirt, C. W., and Nichols, B. D. (1981). “Volume of fluid (VOF) method for the dynamics of free boundaries.” J. Comput. Phys., 39(1), 201–225.
Issa, R. I. (1985). “Solution of the implicitly discretised fluid flow equations by operator-splitting.” J. Comput. Phys., 62(1), 40–65.
Jarman, D. S., et al. (2008). “Computational fluid dynamics as a tool for urban drainage system analysis: A review of applications and best practice.” Proc., 11th Int. Conf. on Urban Drainage on CD-ROM, Edinburgh, Scotland, U.K., 1–10.
Leandro, J., Chen, A., Djordjević, S., and Savić, D. A. (2009). “Comparison of 1D/1D and 1D/2D coupled (sewer/surface) hydraulic models for urban flood simulation.” J. Hydraul. Eng., 495–504.
Leandro, J., Lopes, P., Carvalho, R., Páscoa, P., Martins, R., and Romagnoli, M. 2014. “Numerical and experimental characterization of the 2D vertical average-velocity plane at the centre-profile and qualitative air entrainment inside a gully for drainage and reverse flow.” Comput. Fluids, 102, 52–61.
Leandro, J., Schumann, A., and Pfister, A. (2016). “A step towards considering the spatial heterogeneity of urban key features in urban hydrology flood modelling.” J. Hydrol., 535, 356–365.
Lopes, P., Leandro, J., Carvalho, R. F., Páscoa, P., and Martins, R. (2015). “Numerical and experimental investigation of a gully under surcharge conditions.” Urban Water J., 12(6), 468–476.
Martins, R., Leandro, J., and de Carvalho, R. F. (2014). “Characterization of the hydraulic performance of a gully under drainage conditions.” Water Sci. Technol., 69(12), 2423–2430.
Moriasi, D. N., et al. (2007). “Model evaluation guidelines for systematic quantification of accuracy in watershed simulations.” Am. Soc. Agric. Biol. Eng., 50(3), 885–900.
Nash, J. E., and Sutcliffe, J. V. (1970). “River flow forecasting through conceptual models. Part I—A discussion of principles.” J. Hydrol., 10(3), 282–290.
NFCO. (1998). Catalog, Neenah Foundary Company, Neenah, WI.
OpenFOAM [Computer software]. ESI Group, France.
OpenFOAMWiki. (2013). “Contrib/swak4Foam—OpenFOAMWiki [online].” 〈http://openfoamwiki.net/index.php/Contrib/swak4Foam〉 (Sept. 16, 2013).
RGSPPDADAR. (1995). “Regulamento geral dos sistemas públicos e prediais de distribuição de água e drenagem de águas residuais.” Portuguese By-Laws 23/95 from 23rd August—Republic Diary. I: Serie-B, Lisbon, Portugal, 5284–5319.
Romagnoli, M., Carvalho, R. F., and Leandro, J. (2013). “Turbulence characterization in a gully with reverse flow.” J. Hydraul. Eng., 736–744 .
Rubinato, M., Shucksmith, J., Saul, A. J., and Shepherd, W. (2013). “Comparison between InfoWorks hydraulic results and a physical model of an urban drainage system.” Water Sci. Technol., 68(2), 372–379.
Rusche, H. (2002). “Computational fluid dynamics of dispersed two-phase flows at high phase fractions.” Ph.D. thesis, Imperial College of Science, Technology and Medicine Dept. of Mechanical Engineering, London.
Russo, B., and Gómez, M. (2011). “Methodology to estimate hydraulic efficiency of drain inlets.” Proc., ICE—Water Manage., 164(2), 81–90.
Russo, B., Gómez, M., and Tellez, J. (2013). “Methodology to estimate the hydraulic efficiency of nontested continuous transverse grates.” J. Irrig. Drain. Eng., 864–871.
Salome. (2011). “SALOME 6.4 platform download [online].” 〈http://www.salome-platform.org/downloads/salome-v6.4.0〉.
Spaliviero, F., and May, R. W. P. (1998). “Spacing of road gullies. Hydraulic performance of BS EN 124 gully gratings and kerb inlets.”, HR Wallingford, U.K.
Tabor, G. (2010). “OpenFOAM: An Exeter perspective.” 5th European Conf. on Computational Fluid Dynamics—ECCOMAS CFD, J. C. F. Pereira, A. Sequeira, and J. M. C. Pereira, eds., Lisbon, Portugal.
Ubbink, O. (1997). “Numerical prediction of two fluid systems with sharp interfaces.” Ph.D. thesis, Imperial College of Science, U.K.
WEF and ASCE. (1992). “Design and construction of urban stormwater management systems.”, New York.
Weller, H. (2008). “A new approach to VOF-based interface capturing methods for incompressible and compressible flows.”, OpenCFD, Berkshire, U.K.
Willmott, C. J. (1981). “On the validation of models.” Phys. Geog., 2(2), 184–194.
Information & Authors
Information
Published In
Copyright
© 2016 American Society of Civil Engineers.
History
Received: Apr 16, 2015
Accepted: Feb 29, 2016
Published online: May 18, 2016
Published in print: Oct 1, 2016
Discussion open until: Oct 18, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.