Simple Relationships for the Optimal Design of Paired Drip Laterals on Uniform Slopes
This article has been corrected.
VIEW CORRECTIONThis article has a reply.
VIEW THE REPLYThis article has a reply.
VIEW THE REPLYPublication: Journal of Irrigation and Drainage Engineering
Volume 142, Issue 2
Abstract
Microirrigation plants, if properly designed, allow water use efficiency to be optimized and quite high values of emission uniformity to be obtained in the field. It is known that disposing paired laterals, in which two distribution pipes extend in opposite directions from a common manifold, contribute to increasing water use efficiency. Recently, an analytical procedure has been proposed to optimally design paired drip laterals on uniform slopes under the assumption of neglect: (1) the variations of the emitters’ flow rate along the lateral, and (2) the local losses due to the emitters’ insertions. However, this procedure is not readily usable for every geometric and hydraulic characteristic of the lateral and slope fields because it requires solving a system of implicit equations. This study derives simple explicit relationships, reproducing the proposed approach, allowing derivation of the design variables that are required for the optimal design. Moreover, an easy method to determine the best position of the manifold associated to the optimal lateral length on uniform slopes is proposed, making evident a very moderate influence of the geometric and hydraulic characteristics of the lateral. The proposed procedure was successful compared with that derived by the analytical solution. Applications of the proposed relationships, considering different design parameters, are presented and discussed.
Get full access to this article
View all available purchase options and get full access to this article.
References
Agnese, C., Baiamonte, G. and Cammalleri, C. (2014). “Modelling the occurrence of rainy days in a typical mediterranean.” Adv. Water Resour., 64, 62–76.
Al-Samarmad, O. T. (2002). “Optimum dimension of a trickle irrigation subunit by using local prices.” M.Sc. thesis, Dept. of Irrigation and Drainage Engineering, College of Engineering, Univ. of Baghdad, Baghdad, Iraq.
Baiamonte, G., et al. (2014). “Structure alteration of a sandy-clay soil by biochar amendments.” J. Soil Sediments, 15(4), 816–824.
Baiamonte, G., Provenzano, G., and Rallo, G. (2015). “Analytical approach determining the optimal length of paired drip laterals in uniformly sloped fields.” J. Irrig. Drain Eng., 04014042.
Genius, M., Koundouriy, P., Naugesz, C., and Tzouvelekas, V. (2012). “Information transmission in irrigation technology adoption and diffusion: Social learning, extension services and spatial effects.” Athens Univ. of Economics and Business, Athens, Greece.
Gill, P. E., Murray, W., and Wright, M. H. (1989). Practical optimization, Academic, San Diego, 90–91.
Jiang, S., and Kang, Y. (2010). “Simple method for the design of microirrigation paired laterals.” J. Irrig. Drain. Eng., 271–275.
Kang, Y., and Nishiyama, S. (1996). “Analysis and design of microirrigation laterals.” J. Irrig. Drain. Eng., 75–82.
Karmeli, D., and Keller, J. (1975). “Trickle irrigation design.” Rain Bird Sprinkler Manufacturing Corporation, Glendora, CA.
Keller, J., and Bliesner, R. D. (1990). Sprinkle and trickle irrigation, Blackburn Press, New York.
Keshtgar, A., Bhuiyan, M. A., and Jayasuriya, N. (2013). “Design of drip irrigation system using microtubes for full emission uniformity.” Irrig. Sci., 62(5), 613–623.
Provenzano, G., and Pumo, D. (2004). “Experimental analysis of local pressure losses for microirrigation laterals.” J. Irrig. Drain. Eng., 318–324.
Provenzano, G., Pumo, D., and Di Dio, P. (2005). “Simplified procedure to evaluate head losses in drip irrigation laterals.” J. Irrig. Drain. Eng., 525–532.
Wolfram, S. (1999). The mathematica book, 4th Ed. Cambridge University Press, Cambridge, U.K., 771–772.
Wu, I. P. (1975). “Design of drip irrigation main lines.” J. Irrig. Drain. Div., 101, 265–278.
Wu, I. P., and Gitlin, H. M. (1975). “Energy gradient line for drip irrigation laterals.” J. Irrig. Drain. Div., 101, 321–326.
Wu, I. P., Gitlin, H. M., Solomon, K. H., and Saruwatari, C. A. (1986). Design principles: Trickle irrigation for crop production, F. S. Nakayama and D. A. Bucks, eds., Elsevier Science, Phoenix, 53–92.
Wu, I. P., Saruwatari, C. A., and Gitlin, H. M. (1983). “Design of drip irrigation lateral length of uniform slopes.” Irrig. Sci., 4(2), 117–135.
Information & Authors
Information
Published In
Copyright
© 2015 American Society of Civil Engineers.
History
Received: Feb 3, 2015
Accepted: Aug 26, 2015
Published online: Oct 14, 2015
Published in print: Feb 1, 2016
Discussion open until: Mar 14, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.