Enhancing the Efficiency of the Automatic Design of Rural Drainage Networks
Publication: Journal of Irrigation and Drainage Engineering
Volume 140, Issue 6
Abstract
The discharges flowing through rural drainage networks depend not only on the local climatic and hydrologic characteristics, but also on the geometric characteristics of the channels constituting the network. For this reason, the evaluation of the design discharges should be accomplished during the search of the optimal network. This leads to time-consuming optimization procedures, and it is desirable to devise efficient numerical alternatives. Two novel models, EGA and EGA-f, are proposed in order to increase the numerical efficiency of genetic algorithms (GAs) for the solution of the optimal rural drainage network problem. Both EGA and EGA-f procedures are based on the use of the nodal excavation depths at the channel ends as decision variables. Moreover, the EGA-f procedure improves EGA by freezing temporarily the design discharges during the optimization process in the case where uniform flows through the channels can be assumed. The application of the two models is demonstrated by means of numerical experiments, confirming their superiority over existing GAs for the optimization of rural drainage networks.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors want to thank the editor and the two anonymous reviewers for their observations, that contributed to improve the paper considerably.
References
Afshar, M. H., Afshar, A., Marino, M. A., and Darbandi, A. A. S. (2006). “Hydrograph-based storm sewer design optimization by genetic algorithm.” Can. J. Civ. Eng., 33(3), 319–325.
Afshar, M. H., and Zamani, H. (2002). “An improved storm water network design model in spreadsheet template.” Int. J. Eng. Sci., 13(4), 135–148.
ASCE. (1996). Hydrology handbook, 2nd Ed., ASCE Manuals and Reports on Engineering Practice 28, Reston, VA.
Chahar, B. R. (2005). “Optimal design of parabolic canal section.” J. Irrig. Drain. Eng., 546–554.
Chow, V. T. (1959). Open channel hydraulics, McGraw-Hill, New York.
Chow, V. T. (1962). “Hydrologic design of culverts.” J. Hydraul. Div., 88(HY2), 39–55.
Cimorelli, L., Covelli, C., Mucherino, C., Palumbo, A., and Pianese, D. (2011). “Optimal design of wastewater and rainstorm drainage networks.” Proc. 1st Indo-Italian Workshop on “Advances in Fluvial Hydraulics and Water Resources Development and Management, Central Water and Power Research Station, Pune, India, 164–204.
Cimorelli, L., Covelli, C., Palumbo, A., and Pianese, D. (2009). “Una metodologia per il dimensionamento ottimale, su basi probabilistiche, delle reti rurali di drenaggio.” Proc., 9th Convegno Nazionale dell’Associazione Italiana di Ingegneria Agraria “Ricerca e Innovazione nell’Ingegneria dei Biosistemi Agro-Territoriali, Doppiavoce, Napoli, Italy, (in Italian).
Cimorelli, L., Cozzolino, L., Covelli, C., Mucherino, C., Palumbo, A., and Pianese, D. (2013a). “Optimal design of rural drainage networks.” J. Irrig. Drain. Eng., 137–144.
Cimorelli, L., Cozzolino, L., Della Morte, R., and Pianese, D. (2013b). “An improved numerical scheme for the approximate solution of the Parabolic Wave model.” J. Hydroinform., 15(3), 913–925.
Cimorelli, L., Cozzolino, L., Della Morte, R., and Pianese, D. (2014). “Analytical solutions of the linearized parabolic wave accounting for downstream boundary conditions and uniform lateral inflows.” Adv. Water Resour., 63, 57–76.
Das, A. (2000). “Optimal channel cross section with composite roughness.” J. Irrig. Drain. Eng., 68–72.
Das, A. (2007). “Optimal design of channel having horizontal bottom and parabolic sides.” J. Irrig. Drain. Eng., 192–197.
Della Morte, R., Iavarone, V., and Pianese, D. (2001). “Evaluation of maximum flow depths and discharges in drainage networks by a simplified model coupled to a variational approach.” Proc. 29th IAHR Congress—Theme D2, Quinghua University Press, Beijing, 689–696.
Jain, A., Bhattacharjya, R. K., and Srinivasulu, S. (2004). “Optimal design of composite channels using genetic algorithm.” J. Irrig. Drain. Eng., 286–295.
Liang, L. Y., Thompson, R. G., and Young, D. M. (2000). “Designing wastewater collection systems using genetic algorithms.” PRICAI 2000 topics in artificial intelligence, lecture notes in computer science, Vol. 1886, Springer, Berlin and Heidelberg, 415–423.
Palumbo, A., Cimorelli, L., Covelli, C., Cozzolino, L., Mucherino, C., and Pianese, D. (2013). “Optimal design of urban drainage networks.” Civ. Eng. Environ. Syst., 1–18.
Pan, T. C., and Kao, J. J. (2009). “GA-QP model to optimize sewer system design.” J. Environ. Eng., 17–24.
Peng, W., and Jia, R. (2004). “Improved genetic algorithms for optimal design of drainage systems.” Int. Conf. on Control, Automation, Robotics and Vision, Vol. 1, Nanyang Technical Univ., Singapore, 227–231.
Pianese, D., Covelli, C., and Cozzolino, L. (2012). About the “Italian method of the Volume di Invaso.” Dipartimento di Ingegneria Idraulica, Geotecnica e Ambientale dell’Università degli Studi di Napoli Federico II, Internal Rep. n° 50, CUEN, Napoli.
Supino, G. (1965). Le reti idrauliche, Casa Editrice Pàtron, Bologna, Italy (in Italian).
Swamee, P. K., Mishra, G. C., and Chahar, B. R. (2000). “Design of minimum seepage loss canal sections.” J. Irrig. Drain. Eng., 28–32.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Apr 13, 2013
Accepted: Dec 30, 2013
Published ahead of print: Mar 3, 2014
Published online: Mar 4, 2014
Published in print: Jun 1, 2014
Discussion open until: Aug 4, 2014
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.