Iterative Formulas and Estimation Formulas for Computing Normal Depth of Horseshoe Cross-Section Tunnel
Publication: Journal of Irrigation and Drainage Engineering
Volume 136, Issue 11
Abstract
This note presents iterative formulas that can be used to calculate the normal depth for all types of horseshoe cross sections. Based on the principle of gradual optimization fitting, general estimation formulas were developed for direct computation of the normal depth for all types of the standard horseshoe cross sections. The estimation formulas have high accuracy for hydraulic designers to use in comparison with the accurate normal depths determined from iterative formulas, and the maximum relative error is less than 0.5%.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This study was supported by a state 863 project (Grant No. UNSPECIFIED2002AA62Z3191) of the People’s Republic of China. The writers would like to thank Mr. Zhao Yanfeng for his suggestions on this study. They are also grateful to Mr. Lv Hongxing for his previous work on normal depth calculation of horseshoe cross sections.
References
Babaeyan-Koopaei, K. (2001). “Dimensionless curves for normal-depth calculations in canal sections.” J. Irrig. Drain. Eng., 127(6), 386–389.
Chengdu University of Science and Technology. (1979). Hydraulics, Hydraulic Research Div., ed., Vol. 2, The People’s Education Publishing Company, Beijing.
Chow, V. T. (1959). Open channel hydraulics, McGraw-Hill, New York.
Fan, H. H., Chen, N. X., Yang, L., and Huang, J. B. (2006). “Numerical simulation and experimental verification of transient mixed free-surface-pressure flow.” Engineering Mechanics (Chinese), 23(6), 16–20.
Hu, W. W. (1973). “Hydraulic elements for USBR standard horseshoe tunnel.” Transp. Engrg. J., 99(4), 973–980.
Lv, H. X., Xin, Q. C., and Hua, L. F. (2001). “Calculation on normal depth of horseshoe cross section by iterative method.” Journal of Yangtze River Scientific Research Institute, 18(3), 7–10.
MathWorks. (2004). Genetic algorithm and direct search toolbox user’s guide, The MathWorks, Inc., Natick, Mass.
Merkley, G. P. (2005). “Standard horseshoe cross section geometry.” Agric. Water Manage., 71(1), 61–70.
Ozis, U. (1996). “Historical water schemes in Turkey.” Int. J. Water Resour. Dev., 12(3), 347–384.
Swamee, P. K. (1994). “Normal-depth equations for irrigation canals.” J. Irrig. Drain. Eng., 120(5), 942–948.
Swamee, P. K., and Rathie, P. N. (2004). “Exact solutions for normal depth problem.” J. Hydraul. Res., 42(5), 541–547.
Tsinghua University. (1980). Hydraulics, Hydraulic Research Div., ed., Vol. 2, The Higher Education Publishing Company, Beijing.
Wang, Z. Z., Song, S. B., and Wang, S. M. (1999). “A direct formula calculating normal depth for open trapezoidal channel with spherical bed.” Journal of Yangtze River Scientific Research Institute, 16(4), 31–34.
Wang, Z. Z., Xi, G. Z., and Song, S. B. (1998). “A direct calculation formula for normal depth in open trapezoidal channel.” Journal of Yangtze River Scientific Research Institute, 15(6), 1–3.
Zhang, K. D., Lv, H. X., and Zhao, Y. F. (2009). “Direct calculation for normal depth and critical depth of circular section tunnel under free flow.” Transactions of the CSAE (Chinese Society of Agricultural Engineering), 25(3), 1–5.
Zhao, Y. F., Lu, Q., and Zhang, K. D. (2008). “An approximate formula for calculating water depth of uniform flow in circular cross section.” Journal of Northwest A &F University (Nat. Sci. Ed.), 36(5), 225–228.
Zheng, J. Z., and Liu, Z. H. (2001). Numerical method, 2nd Ed., Publishing House of Xian Communication University, Xian, People’s Republic of China.
Information & Authors
Information
Published In
Copyright
© 2010 ASCE.
History
Received: Aug 10, 2009
Accepted: Apr 2, 2010
Published online: Apr 19, 2010
Published in print: Nov 2010
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.