Drawdown due to Pumping a Partially Penetrating Large-Diameter Well Using MODFLOW
Publication: Journal of Irrigation and Drainage Engineering
Volume 135, Issue 3
Abstract
The approach by the author for modeling the large-diameter wells using MODFLOW is extended to the partially penetrating large-diameter wells. The temporal variation of drawdown due to a steady pumping is presented in the form of diagnostic curves for different penetration. These diagnostic curves can also be used to estimate the aquifer parameters from the observed drawdowns in a partially penetrating large-diameter well.
Get full access to this article
View all available purchase options and get full access to this article.
References
Boulton, N. S., and Streltsova, T. D. (1976). “The drawdown near an abstraction well of large-diameter under non-steady conditions in an unconfined aquifer.” J. Hydrol., 30, 29–46.
Harbaugh, A. W., and McDonald, M. G. (1996). “Programmer’s documentation for MODFLOW-96, an update to the U.S. Geological Survey modular finite-difference ground-water flow model.” U.S. Geological Survey Open-File Report No. 96-486, U.S. Geological Survey, Washington, D.C.
Lakshminarayana, V. L., and Rajgopalan, S. P. (1978). “Digital model studies of unsteady-state radial flow to partially penetrating wells in unconfined anisotropic aquifers.” J. Hydrol., 38(3), 249–262.
McDonald, M. G., and Harbaugh, A. W. (1988). “A modular three-dimensional finite difference groundwater flow model.” Techniques of water-resources investigations, Book 6, Chap. A1, U.S. Geological Survey, Denver.
Papadopulos, I. S., and Cooper, H. H., Jr. (1967). “Drawdown in a well of large diameter.” Water Resour. Res., 3(1), 241–244.
Rushton, K. R., and Holt, S. M. (1981). “Estimating aquifer parameters for large diameter well.” Ground Water, 21, 670–679.
Rushton, K. R., and Redshaw, S. C. (1979). Seepage and groundwater flow, numerical analysis by analog and digital methods, Wiley, Chichester, 237–249.
Singh, S. K. (1990). “Analysis of flow to a dug-well in hard rock area in an unconfined aquifer by cell theory.” Technical Rep. No. TR-87, National Institute of Hydrology, Roorkee, India, 78.
Singh, S. K. (1997). “Modelling of flow to a large diameter well using MODFLOW.” Proc., Int. Symp. Emerging Trends in Hydrology (ISETH), Dept. of Hydrology, Univ. of Roorkee (now, I.I.T. Roorkee), India, 287–292.
Singh, S. K. (2007a). “Semianalytical model for drawdown due to pumping a partially penetrating large-diameter well.” J. Irrig. Drain. Eng., 133(2), 155–161.
Singh, S. K. (2007b). “Simple equations for drawdowns in large-diameter wells.” J. Irrig. Drain. Eng., 133(3), 279–281.
Singh, S. K. (2007c). “Optimizing aquifer parameters from drawdowns in large-diameter wells.” J. Irrig. Drain. Eng., 133(4), 411–413.
Singh, S. K. (2008a). “Simulating the well function for large-diameter wells using MODFLOW.” J. Irrig. Drain. Eng., 134(3), 414–416.
Singh, S. K. (2008b). “Estimating aquifer parameters from early drawdowns in large-diameter wells.” J. Irrig. Drain. Eng., 134(3), 409–413.
Singh, S. K. (2008c). “Aquifer parameters from drawdowns in large-diameter wells: Unsteady pumping.” J. Hydrol. Eng., 13(7), 636–640.
Theis, C. V. (1935). “Relation between the lowering of piezometric surface and the rate and duration of discharge of a well using groundwater storage.” Trans., Am. Geophys. Union, 16, 519–524.
Information & Authors
Information
Published In
Copyright
© 2009 ASCE.
History
Received: Nov 2, 2007
Accepted: Jun 14, 2008
Published online: May 15, 2009
Published in print: Jun 2009
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.