Evaluation of MCM-41 Nanoparticles for Removal of Phenol Contents from Coke-Oven Wastewater
Publication: Journal of Hazardous, Toxic, and Radioactive Waste
Volume 22, Issue 2
Abstract
Coke oven wastewater containing high concentrations of phenol and chemical oxygen demand (COD) was collected from a local steel plant of Odisha. The treatment of coke oven wastewater was carried out by using Mobil Composition of Matter No. 41 (MCM-41) nanoadsorbent. The effect of various adsorption parameters, such as temperature (°C), initial pH, agitation speed (rpm), and MCM-41 dosage () on phenol adsorption was investigated using a two-level factorial experimental design. Enhancing MCM-41 dosage had a positive effect on the phenol adsorption performance, whereas with increasing pH, a negative effect on phenol removal was observed. The significant adsorption parameters obtained from the screening study were optimized by central composite design and response surface methodology (RSM). Results revealed that more than 96% phenol adsorption along with 90% COD removal was achieved at an optimum combination of pH 5, agitation speed 98 rpm, and of MCM-41 dosage. Among the various isotherms tested at the optimized conditions, Langmuir isotherm and Temkin isotherm were found to be very well fitted to the experimental data. Furthermore, values of the dimension separation factor and interaction parameter indicated that the adsorption of phenol onto MCM-41 was very favorable. The study revealed the potential of MCM-41 for the treatment of coke oven wastewater.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors acknowledge the financial support received from the Science and Engineering Research Board, Government of India, New Delhi for carrying out this research work.
References
Anbi, M., Hariri, S. A., and Ashrafizadeh, S. (2010). “Adsorptive removal of anionic dyes by modified nanoporous silica SBA-3.” Appl. Surf. Sci., 256(10), 3228–3233.
APHA (American Public Health Association). (1998). Standard methods for the examination of water and wastewater, 20th Ed., Washington, DC.
Beck, J. S., et al. (1992). “A new family of mesoporous molecular sieves prepared with liquid crystal templates.” J. Am. Chem. Soc., 114(27), 10834–10843.
Cao, J., Wu, Y., Jin, Y., Yilihan, P., and Huang, W. J. (2014). “Response surface methodology approach for optimization of the removal of chromium (VI) by -MCM-41.” Taiwan. Inst. Chem. Eng., 45(3), 860–868.
Das, N., Pattanaik, P., and Das, R. (2005). “Defluoridation of drinking water using activated titanium rich bauxite.” J. Colloid. Inter. Sci., 292(1), 1–10.
Dhorabe, P. T., Lataye, D. H., and Ingole, R. S. (2017). “Adsorptive removal of 4-nitrophenol from aqueous solution by activated carbon prepared from waste orange peels.” J. Hazard. Toxic Radioact. Waste, 04016015.
Eker, S., and Kargi, F. (2007). “Performance of a hybrid-loop bioreactor system in biological treatment of 2, 4, 6-tri-chlorophenol containing synthetic wastewater: Effects of hydraulic residence time.” J. Hazard. Mater., 144(1–2), 86–92.
El-Naggar, M. R., Aglan, R. F., and Sayed, M. S. (2013). “Direct incorporation method for the synthesis of molybdophosphate/MCM-41 silica composite: Adsorption study of heavy metals from aqueous solutions.” J. Environ. Chem. Eng., 1(3), 516–525.
Hu, Y., He, Y., Wang, X., and We, C. (2014). “Efficient adsorption of phenanthrene by simply synthesized hydrophobic MCM-41 molecular sieves.” Appl. Surf. Sci., 311(8), 825–830.
Ingole, R. S., and Lataye, D. H. (2015). “Adsorptive removal of phenol from aqueous solution using activated carbon prepared from babul sawdust.” J. Hazard. Toxic Radioact. Waste, 04015002.
Islam, N., and Patel, R. K. (2007). “Evaluation of removal efficiency of fluoride from aqueous solution using quick lime.” J. Hazard. Mater., 143(1–2), 303–310.
Jaya, R., Vivekanandan, S., and Lakshmi, S. (2001). “Adsorption behavior of N- haloarenesulphonamidetes on activated carbon at 303 K.” Ind. J. Chem., 40A(1), 115–118.
Kabuk, H. A., İlhan, F., Avsar, Y., Kurt, U., Apaydin, O., and Gonullu, M. T. (2014). “Investigation of leachate treatment with electrocoagulation and optimization by response surface methodology.” Clean Soil Air Water, 42(5), 571–577.
Kannan, K., and Sundaram, M. M. (2001). “Kinetics and mechanism of removal of methylene blue by adsorption on various carbons a comparative study.” Dyes Pig., 51(1), 25–40.
Khan, N. A., Hasan, Z., and Jhung, S. H. (2013). “Adsortive removal of hazardous materials using metal organic framework (MOFs): A review.” J. Hazard. Mater., 244(1), 444–456.
Kim, Y. M., Park, D., Lee, D. S., Jung, K. A., and Park, J. M. (2009). “Sudden failure of biological nitrogen and carbon removal in the full-scale pre-denitrification process treating cokes wastewater.” Biores. Technol., 100(19), 4340–4347.
Kim, Y. M., Park, D., Lee, D. S., and Park, J. M. (2008). “Inhibitory effects of toxic compounds on nitrification process for cokes wastewater treatment.” J. Hazard. Mater., 152(3), 915–921.
MINITAB version 15.1 [Computer software]. Minitab, Inc., State College, PA.
Murthy, M. S. R. C., Swaminathan, T., and Rakshit, K. Y. (2000). “Statistical optimization of lipase catalyzed hydrolysis of methyloleateby response surface methodology.” Bioproc. Eng., 22(1), 35–39.
Muto, S., and Imai, H. (2006). “Relationship between meso structures and pH conditions for the formation of silica-cationic surfactant complexes.” Micro. Meso. Mater., 95(1–3), 200–205.
Parida, K., Mishra, K. G., and Dash, S. K. (2012). “Adsorption of toxic metal ion Cr(VI) from aqueous state by -MCM-41: Equilibrium and kinetic studies.” J. Hazard. Mater., 241(11), 395–403.
Park, D., Lee, D. S., Kim, Y. M., and Park, J. M. (2008). “Bioaugmentation of cyanide-degrading microorganisms in a full-scale cokes wastewater treatment facility.” Biores. Technol., 99(6), 2092–2096.
Parvulescu, V., and Su, B. L. (2001). “Iron cobalt or nickel substituted MCM-41 molecular sieve for oxidation of hydrocarbon.” Catal. Today, 69(1–4), 315–322.
Pavia, D., Lampman, G. M., and Kriz, G. S. (2001). Introduction to spectroscopy, Harcourt College Publisher, San Diego.
Pérez-Quintanilla, D., Sánchez, A., Del Hierro, I., Fajard, M., and Sierra, I. (2007). “Preparation, characterization, and adsorption behavior of chemically modified MCM-41 with 5-mercapto-1-methyltetrazole.” J. Coll. Inter. Sci., 313(2), 551–562.
Qin, Q., and KeLiu, J. M. (2007). “Adsorption of nitrobenzene from aqueous solution by MCM-41.” J. Coll. Inter. Sci., 315(1), 80–86.
Sahoo, N. K., Pakshirajan, K., Ghosh, P. K., and Ghosh, A. (2011). “Biodegradation of 4-chlorophenol by Arthrobacter chlorophenolicus A6: Effect of culture conditions and degradation kinetics.” Biodegradation, 22(2), 275–286.
Shao, Y., Wang, X., Kang, Y., Shu, Y., Sun, Q., and Li, L. (2014). “Application of Mn/MCM-41 as an adsorbent to remove methyl blue from aqueous solution.” J. Col. Int. Sci., 429(7), 25–33.
Tanyildizim, M. S., Ozer, D., and Elibol, M. (2005). “Optimization of -amylase production by Bacillus sp. using response surface methodology.” Proc. Biochem., 40(7), 2291–2296.
Vilvanathan, S., and Shanthakumar, S. (2015). “Biosorption of Co(II) ions from aqueous solution using Chrysanthemumindicum: Kinetics, equilibrium and thermodynamics.” Proc. Saf. Environ. Prot., 96(7), 98–110.
Wu, Y., Jin, Y., Cao, J., Yilihan, P., Wen, Y., and Zhou, J. (2014). “Optimizing adsorption of arsenic (III) by using response surface methodology.” J. Ind. Eng. Chem., 20(5), 2792–2800.
Yang, S., Wu, Y., Wu, Y., and Zhu, L. (2015). “Optimizing decolorization of acid fuchsin and acid orange II solution by loaded MCM-41.” J. Taiwan Inst. Chem. Eng., 50(5), 205–214.
Zhang, M., Tay, J. H., Qian, Y., and Gu, X. S. (1998). “Coke plant wastewater treatment by fixed biofilm system for COD removal.” Water Res., 32(2), 519–527.
Zhao, D., Sheng, G., Hu, J., Chen, C., and Wang, X. (2011). “The adsorption of Pb(II) on layered double hydroxide.” Chem. Eng. J., 171(1), 167–174.
Information & Authors
Information
Published In
Copyright
©2018 American Society of Civil Engineers.
History
Received: Mar 21, 2017
Accepted: Aug 4, 2017
Published online: Jan 5, 2018
Published in print: Apr 1, 2018
Discussion open until: Jun 5, 2018
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.