Technical Papers
Aug 30, 2022

Large Eddy Simulation of Inclined Negatively Buoyant Jets with Sloped Beds

Publication: Journal of Hydraulic Engineering
Volume 148, Issue 11

Abstract

The effluents produced by reverse osmosis desalination plants are usually disposed under the surface of the sea as inclined negatively buoyant jets (INBJ), to achieve the highest mixing rate. Bed slope in the local environment is one of the contributing factors in the behavior of INBJs. The aim of the present study is to utilize large eddy simulation (LES) to study the effects of the bed slope on the dilution and spreading of INBJs with 30°, 45°, and 60° nozzle angles. In this regard, five down slopes, 0°, 5°, 10°, 15°, and 20° were considered for the bed, and the mixing and geometrical properties of INBJs were studied in both jet plume and spreading layer regions. Present simulations show that the increase in the bed slope for all the three nozzle angles favorably increases the dilution of the INBJs at return point, concentration buildup point (CBP), impact point, and on the bed. For a 20° increase in the bed slope, the relative increase in the dilution at CBP of 30°, 45°, and 60° INBJs is calculated as 167.75%, 81.13%, and 107.43%, respectively. Also, the centerline dilution is the highest for the 60° nozzle angle at each bed inclination. The distribution of the mean concentration on the bed shows that an increase in the nozzle and bed inclination results in a significant decrease in the mean concentration and the area in which the effluent alters the ambient water quality. Present results suggest that the INBJs should be discharged into the ambient water in sloped environments, and the nozzle angle of 60° is preferred to 30° and 45° regardless of the bed inclination.

Get full access to this article

View all available purchase options and get full access to this article.

Data Availability Statement

All data, models, and code generated or used during the study appear in the published paper.

References

Abessi, O., and P. J. W. Roberts. 2015. “Effect of nozzle orientation on dense jets in stagnant environments.” J. Hydraul. Eng. 141 (8): 06015009. https://doi.org/10.1061/(ASCE)HY.1943-7900.0001032.
Abessi, O., and P. J. W. Roberts. 2017. “Multiport diffusers for dense discharge in flowing ambient water.” J. Hydraul. Eng. 143 (6): 04017003. https://doi.org/10.1061/(ASCE)HY.1943-7900.0001279.
Cavar, D., and K. E. Meyer. 2012. “LES of turbulent jet in cross-flow: Part 1—A numerical validation study.” Int. J. Heat Fluid Flow 36 (Aug): 18–34. https://doi.org/10.1016/j.ijheatfluidflow.2011.12.009.
Celik, I., M. Klein, and J. Janicka. 2009. “Assessment measures for engineering LES applications.” J. Fluids Eng. 131 (3): 031102. https://doi.org/10.1115/1.3059703.
Celik, I. B., Z. N. Cehreli, and I. Yavuz. 2005. “Index of resolution quality for large eddy simulations.” J. Fluids Eng. 127 (5): 949–958. https://doi.org/10.1115/1.1990201.
Christodoulou, G. C., I. G. Papakonstantis, and I. K. Nikiforakis. 2015. “Desalination brine disposal by means of negatively buoyant jets.” Desalin. Water Treat. 53 (12): 3208–3213. https://doi.org/10.1080/19443994.2014.933039.
Cintolesi, C., A. Petronio, and V. Armenio. 2019. “Turbulent structures of buoyant jet in cross-flow studied through large-eddy simulation.” Environ. Fluid Mech. 19 (2): 401–433. https://doi.org/10.1007/s10652-018-9629-1.
Daskiran, C., F. Cui, M. C. Boufadel, L. Zhao, S. A. Socolofsky, T. Ozgokmen, B. Robinson, and T. King. 2020. “Hydrodynamics and dilution of an oil jet in crossflow: The role of small-scale motions from laboratory experiment and large eddy simulations.” Int. J. Heat Fluid Flow 85 (Oct): 108634. https://doi.org/10.1016/j.ijheatfluidflow.2020.108634.
Dawoud, M. A. 2012. “Environmental impacts of seawater desalination: Arabian Gulf case study.” Int. J. Environ. Sustainability 1 (3): 22–37. https://doi.org/10.24102/ijes.v1i3.96.
Huq, P., and M. R. Dhanak. 1996. “The bifurcation of circular jets in crossflow.” Phys. Fluids 8 (3): 754–763. https://doi.org/10.1063/1.868859.
Jiang, B., A. Law, and J. Lee. 2014. “Mixing of 30° and 45° inclined dense jets in shallow coastal waters.” J. Hydraul. Eng. 140 (3): 241–253. https://doi.org/10.1061/(ASCE)HY.1943-7900.0000819.
Jiang, M., and A. W.-K. Law. 2018. “Mixing of swirling inclined dense jets—A numerical study.” J. Hydro-environ. Res. 21 (Oct): 118–130. https://doi.org/10.1016/j.jher.2018.09.004.
Jiang, M., A. W.-K. Law, and S. Zhang. 2018. “Mixing behavior of 45° inclined dense jets in currents.” J. Hydro-environ. Res. 18 (Feb): 37–48. https://doi.org/10.1016/j.jher.2017.10.008.
Jirka, G. H. 2008. “Improved discharge configurations for brine effluents from desalination plants.” J. Hydraul. Eng. 134 (1): 116–120. https://doi.org/10.1061/(ASCE)0733-9429(2008)134:1(116).
Kamotani, Y., and I. Greber. 1972. “Experiments on a turbulent jet in a cross flow.” AIAA J. 10 (11): 1425–1429. https://doi.org/10.2514/3.50386.
Kikkert, G. A., M. J. Davidson, and R. I. Nokes. 2007. “Inclined negatively buoyant discharges.” J. Hydraul. Eng. 133 (5): 545–554. https://doi.org/10.1061/(ASCE)0733-9429(2007)133:5(545).
Kim, W.-W., and S. Menon. 1995. “A new dynamic one-equation subgrid-scale model for large eddy simulations.” In Proc., 33rd Aerospace Sciences Meeting and Exhibit. Reno, NV: American Institute of Aeronautics and Astronautics.
Kremer, D. M., M. T. am Ende, J. G. Mustakis, and D. J. am Ende. 2007. “A numerical investigation of a jet in an oscillating crossflow.” Phys. Fluids 19 (9): 095103. https://doi.org/10.1063/1.2770523.
Lai, C. C. K., and J. H. W. Lee. 2012. “Mixing of inclined dense jets in stationary ambient.” J. Hydro-environ. Res. 6 (1): 9–28. https://doi.org/10.1016/j.jher.2011.08.003.
Law, A. W. K. 2006. “Velocity and concentration distributions of round and plane turbulent jets.” J. Eng. Math. 56 (1): 69–78. https://doi.org/10.1007/s10665-006-9037-2.
Mahdinia, M., B. Firoozabadi, M. Farshchi, A. G. Varnamkhasti, and H. Afshin. 2012. “Large eddy simulation of lock-exchange flow in a curved channel.” J. Hydraul. Eng. 138 (1): 57–70. https://doi.org/10.1061/(ASCE)HY.1943-7900.0000482.
Neuparth, T., F. O. Costa, and M. H. Costa. 2002. “Effects of temperature and salinity on life history of the marine amphipod gammarus locusta. implications for ecotoxicological testing.” Ecotoxicology 11 (1): 61–73. https://doi.org/10.1023/A:1013797130740.
Oliver, C. J., M. J. Davidson, and R. I. Nokes. 2008. “k-ε Predictions of the initial mixing of desalination discharges.” Environ. Fluid Mech. 8 (5): 617. https://doi.org/10.1007/s10652-008-9108-1.
Oliver, C. J., M. J. Davidson, and R. I. Nokes. 2013a. “Behavior of dense discharges beyond the return point.” J. Hydraul. Eng. 139 (12): 1304–1308. https://doi.org/10.1061/(ASCE)HY.1943-7900.0000781.
Oliver, C. J., M. J. Davidson, and R. I. Nokes. 2013b. “Predicting the near-field mixing of desalination discharges in a stationary environment.” Desalination 309 (Jan): 148–155. https://doi.org/10.1016/j.desal.2012.09.031.
Oliver, C. J., M. J. Davidson, and R. I. Nokes. 2013c. “Removing the boundary influence on negatively buoyant jets.” Environ. Fluid Mech. 13 (6): 625–648. https://doi.org/10.1007/s10652-013-9278-3.
Papakonstantis, I. G., and G. C. Christodoulou. 2010. “Spreading of round dense jets impinging on a horizontal bottom.” J. Hydro-environ. Res. 4 (4): 289–300. https://doi.org/10.1016/j.jher.2010.07.001.
Papakonstantis, I. G., G. C. Christodoulou, and P. N. Papanicolaou. 2011. “Inclined negatively buoyant jets 2: Concentration measurements.” J. Hydraul. Res. 49 (1): 13–22. https://doi.org/10.1080/00221686.2010.542617.
Pelmard, J., S. Norris, and H. Friedrich. 2018. “LES grid resolution requirements for the modelling of gravity currents.” Comput. Fluids 174 (Sep): 256–270. https://doi.org/10.1016/j.compfluid.2018.08.005.
Pincince, A. B., and E. J. List. 1973. “Disposal of brine into an estuary.” J. Water Pollut. Control Fed. 45 (11): 2335–2344.
Pope, S. B. 2000. Turbulent flows. Cambridge, UK: Cambridge University Press.
Roberts, P. J. W., A. Ferrier, and G. Daviero. 1997. “Mixing in inclined dense jets.” J. Hydraul. Eng. 123 (8): 693–699. https://doi.org/10.1061/(ASCE)0733-9429(1997)123:8(693).
Roberts, P. J. W., and G. Toms. 1987. “Inclined dense jets in flowing current.” J. Hydraul. Eng. 113 (3): 323–340. https://doi.org/10.1061/(ASCE)0733-9429(1987)113:3(323).
Roe, P. L. 1987. “Upwind differencing schemes for hyperbolic conservation laws with source terms.” In Nonlinear hyperbolic problems, lecture notes in mathematics, edited by C. Carasso, D. Serre, and P.-A. Raviart, 41–51. Berlin: Springer.
Shao, D., and A. W.-K. Law. 2010. “Mixing and boundary interactions of 30° and 45° inclined dense jets.” Environ. Fluid Mech. 10 (5): 521–553. https://doi.org/10.1007/s10652-010-9171-2.
Sweby, P. K. 1984. “High resolution schemes using flux limiters for hyperbolic conservation laws.” SIAM J. Numer. Anal. 21 (5): 995–1011. https://doi.org/10.1137/0721062.
Yimer, I., I. Campbell, and L.-Y. Jiang. 2011. “Estimation of the turbulent schmidt number from experimental profiles of axial velocity and concentration for high-Reynolds-number jet flows.” Can. Aeronaut. Space J. 48 (3): 195–200. https://doi.org/10.5589/q02-024.
Zeitoun, M. A., and W. F. McIlhenny. 1971. “Conceptual designs of outfall systems for desalination plants.” In Proc., Offshore Technology Conf.: OnePetro. Houston, TX: OnePetro. https://doi.org/10.4043/1370-MS.
Zhang, S., B. Jiang, A. W.-K. Law, and B. Zhao. 2016. “Large eddy simulations of 45° inclined dense jets.” Environ. Fluid Mech. 16 (1): 101–121. https://doi.org/10.1007/s10652-015-9415-2.
Zhang, S., A. W.-K. Law, and M. Jiang. 2017. “Large eddy simulations of 45° and 60° inclined dense jets with bottom impact.” J. Hydro-environ. Res. 15 (Jun): 54–66. https://doi.org/10.1016/j.jher.2017.02.001.

Information & Authors

Information

Published In

Go to Journal of Hydraulic Engineering
Journal of Hydraulic Engineering
Volume 148Issue 11November 2022

History

Received: Sep 1, 2021
Accepted: Jun 19, 2022
Published online: Aug 30, 2022
Published in print: Nov 1, 2022
Discussion open until: Jan 30, 2023

Permissions

Request permissions for this article.

Authors

Affiliations

Graduate Student, Dept. of Mechanical Engineering, Sharif Univ. of Technology, P.O. Box 11365-3567, Tehran 14588-89694, Iran. Email: [email protected]
Ph.D. Candidate, Dept. of Mechanical Engineering, Sharif Univ. of Technology, P.O. Box 11365-3567, Tehran 14588-89694, Iran. Email: [email protected]
B. Firoozabadi [email protected]
Professor, Dept. of Mechanical Engineering, Sharif Univ. of Technology, P.O. Box 11365-3567, Tehran 14588-89694, Iran (corresponding author). Email: [email protected]

Metrics & Citations

Metrics

Citations

Download citation

If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.

View Options

Get Access

Access content

Please select your options to get access

Log in/Register Log in via your institution (Shibboleth)
ASCE Members: Please log in to see member pricing

Purchase

Save for later Information on ASCE Library Cards
ASCE Library Cards let you download journal articles, proceedings papers, and available book chapters across the entire ASCE Library platform. ASCE Library Cards remain active for 24 months or until all downloads are used. Note: This content will be debited as one download at time of checkout.

Terms of Use: ASCE Library Cards are for individual, personal use only. Reselling, republishing, or forwarding the materials to libraries or reading rooms is prohibited.
ASCE Library Card (5 downloads)
$105.00
Add to cart
ASCE Library Card (20 downloads)
$280.00
Add to cart
Buy Single Article
$35.00
Add to cart

Get Access

Access content

Please select your options to get access

Log in/Register Log in via your institution (Shibboleth)
ASCE Members: Please log in to see member pricing

Purchase

Save for later Information on ASCE Library Cards
ASCE Library Cards let you download journal articles, proceedings papers, and available book chapters across the entire ASCE Library platform. ASCE Library Cards remain active for 24 months or until all downloads are used. Note: This content will be debited as one download at time of checkout.

Terms of Use: ASCE Library Cards are for individual, personal use only. Reselling, republishing, or forwarding the materials to libraries or reading rooms is prohibited.
ASCE Library Card (5 downloads)
$105.00
Add to cart
ASCE Library Card (20 downloads)
$280.00
Add to cart
Buy Single Article
$35.00
Add to cart

Media

Figures

Other

Tables

Share

Share

Copy the content Link

Share with email

Email a colleague

Share