Assessing the Effectiveness of the IJmuiden Salt Screen Design for Nonuniform Selective Withdrawal by Physical and Numerical Modeling
Publication: Journal of Hydraulic Engineering
Volume 148, Issue 2
Abstract
Salt water intrusion through the New Sea Lock of IJmuiden, Netherlands requires mitigation to ensure availability of enough fresh water further inland. For this purpose, a salt screen has been proposed for selective withdrawal of salt water from the Noordzeekanaal in the vicinity of the lock complex. Formulas to assess the withdrawal rate of selective withdrawal are based on idealized layouts and conditions. In the case of IJmuiden, the flow surrounding a salt screen has a strong nonuniform character, such that these formulas are not applicable to predict the correct withdrawal rate and the effectiveness of selective withdrawal accurately. In this case physical scale modeling or computational fluid dynamics (CFD) modeling can be applied. This article discusses the limitations of the formulas for a three-dimensional (3D) flow application near the locks of IJmuiden and presents the use of CFD and physical scale model research to assess the flow patterns around the salt screen and the effectiveness of selective withdrawal. The CFD model was validated against the physical scale model and represented the complex flow fields around the salt screen to within acceptable deviations for both steady and transient states. This gives confidence in applying these more advanced modeling tools for the design and positioning of salt screens in confined complex 3D flow areas.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code generated or used during the study are available in a repository online in accordance with funder data retention policies. The measurement data set can be obtained through the Deltares Data Portal (https://deltaresdata.openearth.eu/).
Acknowledgments
Rijkswaterstaat is acknowledged for their permission to publish this study and to make the measurement data and simulation results available. The authors are grateful to Wim Uijttewaal and Robert Jan Labeur of the TU Delft for the stimulating discussions during the execution of both the physical and numerical model tests.
References
Abraham, G., and P. van der Burgh. 1964. “Pneumatic reduction of salt intrusion through locks.” J. Hydraul. Div. 90 (1): 83–119. https://doi.org/10.1061/JYCEAJ.0001009.
Adrian, R. J., and J. Westerweel. 2011. Particle image velocimetry. New York: Cambridge University Press.
Boschetti, T., T. O’Mahoney, and A. C. Bijlsma. 2017. CFD modelling of the mitigation of salt intrusion by selective withdrawal. Eindhoven, Netherlands: Eindhoven Univ. Technology.
Delft Hydraulics Laboratory. 1958. Scaling rules for research on density currents. [In Dutch.]. Delft, Netherlands: Delft Hydraulics Laboratory.
Delft Hydraulics Laboratory. 1973. Discharge sluice Noordland in the Eastern Scheldt dam, Selective withdrawal, two-dimensional investigation. [In Dutch.]. Delft, Netherlands: Delft Hydraulics Laboratory.
Delft Hydraulics Laboratory. 1981. New accurate density formulations for pure water and saline solution: Density as a function of temperature and salt concentrations. [In Dutch.]. Delft, Netherlands: Delft Hydraulics Laboratory.
De Loor, A., R. E. Uittenbogaard, and A. C. Bijlsma. 2018. “Evaluation of RANS turbulence models for buoyancy driven flows using Star-CCM+.” In Proc., 5th IAHR Europe Congress Trento, 213–214. Paris: International Association for Hydro-Environment. https://doi.org/10.3850/978-981-11-2731-1_124-cd.
Duinmeijer, S. P., A. M. Moreno-Rodenas, M. Lepot, C. van Nieuwenhuizen, I. Meyer, and F. H. Clemens. 2019. “A simple measuring set-up for the experimental determination of the dynamics of a large particle in the 3D velocity field around a free surface vortex.” Flow Meas. Instrum. 65 (Mar): 52–64. https://doi.org/10.1016/j.flowmeasinst.2018.10.007.
Ettema R., M. Muste, J. Odgaard, P. Ryan, F. Locher, and S. Tu. 2005. “A continuously operable hydraulic model of selective withdrawal from a stratified reservoir.” In Proc., 31st IAHR World Congress, 1751–1758.
Fan, J. 2008. “Stratified flow through outlets.” J. Hydro-environ. Res. 2 (1): 3–18. https://doi.org/10.1016/j.jher.2008.04.001.
Farrow, D. E., and G. C. Hocking. 2006. “A numerical model for withdrawal from a two-layered fluid.” J. Fluid Mech. 549: 141–157. https://doi.org/10.1017/S0022112005007561.
Harleman, D. R. F., and R. A. Elder. 1965. “Withdrawal from two-layer stratified flows.” J. Hydraul. Div. 91 (4): 43–58. https://doi.org/10.1061/JYCEAJ.0001294.
Heikkila, J., and O. Silvén. 1997. “A four-step camera calibration procedure with implicit image correction.” In Proc., 1997 IEEE Computer Society Conf. on Computer Vision and Pattern Recognition, 1106–1112. New York: IEEE.
Hocking, G. C. 1991. “Withdrawal from two-layer fluid through line sink.” J. Hydraul. Eng. 117 (6): 800–805. https://doi.org/10.1061/(ASCE)0733-9429(1991)117:6(800).
Hocking, G. C. 1995. “Supercritical withdrawal from a two-layer fluid through a line sink.” J. Fluid Mech. 297: 37–47. https://doi.org/10.1017/S0022112095002990.
Imberger, J. 1980. Selective Withdrawal: A review. Trondheim, Norway: Norwegian Institute of Technology Trondheim Norway.
Islam, M. R., I. Wood, and D. Z. Zhu. 2018. “Selective withdrawal from an intake channel connected to a reservoir.” J. Eng. Math. 111 (1): 79–94. https://doi.org/10.1007/s10665-018-9955-9.
Jirka, G. H. 1979. “Supercritical withdrawal from two-layered fluid systems.” J. Hydraul. Res. 17 (1): 43–51. https://doi.org/10.1080/00221687909499599.
Jirka, G. H., and D. S. Katavola. 1979. “Supercritical withdrawal from two-layered fluid systems part 2: Three-dimensional flow into round intake.” J. Hydraul. Res. 17 (1): 53–62. https://doi.org/10.1080/00221687909499600.
Kerstma, J., P. A. Kolkman, H. J. Regeling, and W. A. Venis. 1994. Water quality control at ship locks: Prevention of salt- and fresh water exchange. Rotterdam, Netherlands: A.A. Balkema.
Kohlraush, F., and L. Holborn. 1916. Das Leitvermögen der Electrolyte—Insbesondere der wasserigen losungen. Leipzig und Berlin: B.G. Teubner.
Labrique, J. P. 1964. “Portable conductivity meters for low or medium salinity measurements.” J. Hydrol. Sci. 9 (4): 58–62. https://doi.org/10.1080/02626666409493688.
Mausshardt, S., and G. Singelton. 1995. “Mitigating salt-water intrusion though Hiram M. Chittenden locks.” J. Waterw. Port Coastal Ocean Eng. 121 (4): 224–227. https://doi.org/10.1061/(ASCE)0733-950X(1995)121:4(224).
Monish, B. M. 1938. “Discussion of the passage of turbid water through Lake Mead.” Transactions 103 (1): 751–755. https://doi.org/10.1061/TACEAT.0004929.
Nogueira, H. I., P. van der Ven, T. O’Mahoney, A. De Loor, A. van der Hout, and W. Kortlever. 2018. “Effect of density differences on the forces acting on a moored vessel while operating navigation locks.” J. Hydraul. Eng. 144 (6): 04018021. https://doi.org/10.1061/(ASCE)HY.1943-7900.0001445.
Shamaa, Y., and D. Z. Zhu. 2010. “Experimental study on selective withdrawal in a two layer reservoir using a temperature-control curtain.” J. Hydraul. Eng. 136 (4): 234–246. https://doi.org/10.1061/(ASCE)HY.1943-7900.0000165.
STAR-CCM+. 2019. “Simcenter STAR-CCM+.” Accessed December 5, 2019. https://www.plm.automation.siemens.com/global/en/products/simcenter/STAR-CCM.html.
Thendrup, A. 1980. “Selective withdrawal with multiple constrictions and non-linear density profiles.” In Proc., 2nd Symp. on Stratified Flows, 381–400. Trondheim, Norway: Norwegian Institute of Technology Trondheim Norway.
Uittenbogaard, R. E. 1989. “Measurement of turbulent fluxes in a steady, stratified, mixing layer.” In Proc., 3rd Int. Symp. Refined Flow Modelling and Turbulence Measurements, 863–871. Tokyo: Universal Academy Press.
Van den Brink, M., Y. Huismans, M. Blaas, and G. Zwolsman. 2019. “Climate change induced salinization of drinking water inlets along a tidal branch of the Rhine river: Impact assessment and an adaptive strategy for water resources management.” J. Clim. 7 (4): 49. https://doi.org/10.3390/cli7040049.
Van der Kuur, P. 1986. “Locks with devices to reduce salt intrusion.” J. Waterw. Port Coastal Ocean Eng. 111 (6): 1009–1021. https://doi.org/10.1061/(ASCE)0733-950X(1985)111:6(1009).
Wood, I. R. 2001. “Extensions to the theory of selective withdrawal.” J. Fluid Mech. 448: 315–333. https://doi.org/10.1017/S002211200100605X.
Wood, I. R., and K. K. Lai. 1972. “Selective withdrawal from two-layer fluid.” J. Hydraul. Res. 10 (4): 475–496. https://doi.org/10.1080/00221687209500036.
Yu, W. S., S. M. Hsu, and K. L. Fan. 2004. “Experiments on selective withdrawal of a codirectional two-layer flow through a line sink.” J. Hydraul. Eng. 130 (12): 1156–1166. https://doi.org/10.1061/(ASCE)0733-9429(2004)130:12(1156).
Information & Authors
Information
Published In
Copyright
© 2021 American Society of Civil Engineers.
History
Received: Oct 30, 2020
Accepted: Sep 13, 2021
Published online: Dec 15, 2021
Published in print: Feb 1, 2022
Discussion open until: May 15, 2022
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.