Dam-Break Wave Propagation in Alpine Valley with HEC-RAS 2D: Experimental Cancano Test Case
Publication: Journal of Hydraulic Engineering
Volume 146, Issue 6
Abstract
Flood modeling by numerical solution of the two-dimensional (2D) shallow-water equations is ordinary practice. HEC-RAS 2D was recently released along with a suite of test cases showing the very good performance of the code in many practical situations. However, validation test cases aimed at demonstrating the capability of the software to deal with dam-break floods on very steep and irregular bathymetries are very limited. This paper tests HEC-RAS 2D against the discharge hydrographs measured in a historical physical model built in Froude similitude to analyze the consequences of the hypothetical collapse of the Cancano I dam (northern Italy) and the propagation of the resulting dam-break wave along the 15-km reach of the downstream alpine valley. The experimental hydrographs and the measured extent of the flooded areas are well reproduced by the numerical simulations. Moreover, the results obtained with HEC-RAS 2D are in very good agreement with those obtained using TELEMAC 2D, which confirms the suitability of the HEC-RAS 2D software for dam-break flood studies in steep alpine valleys. The data of the test case are made available to the scientific community for validation purposes.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
The data of the Cancano test case used during the study are also available in an online repository of the Hydraulic Engineering Group Brescia (http://hydraulics.unibs.it/hydraulics/4558-2/), including a copy of the original Italian version of De Marchi (1945).
References
Afshari, S., A. A. Tavakoly, M. A. Rajib, X. Zheng, M. L. Follum, E. Omranian, and B. M. Fekete. 2018. “Comparison of new generation low-complexity flood inundation mapping tools with a hydrodynamic model.” J. Hydrol. 556 (Jan): 539–556. https://doi.org/10.1016/j.jhydrol.2017.11.036.
Alcrudo, F., and J. Mulet. 2007. “Description of the Tous dam-break case study (Spain).” Supplement, J. Hydraul. Res. 45 (S1): 45–57. https://doi.org/10.1080/00221686.2007.9521832.
Alho, P., and J. Aaltonen. 2008. “Comparing a 1D hydraulic model with a 2D hydraulic model for the simulation of extreme glacial outburst floods.” Hydrol. Processes 22 (10): 1537–1547. https://doi.org/10.1002/hyp.6692.
Aureli, F., A. Maranzoni, P. Mignosa, and C. Ziveri. 2008. “Dam-break flows: Acquisition of experimental data through an imaging technique and 2D numerical modeling.” J. Hydraul. Eng. 134 (8): 1089–1101. https://doi.org/10.1061/(ASCE)0733-9429(2008)134:8(1089).
Bates, P. D., and J. M. Hervouet. 1999. “A new method for moving-boundary hydrodynamic problems in shallow water.” Proc. R. Soc. London Ser. A Math. Phys. Eng. Sci. 455: 3107–3128. https://doi.org/10.1098/rspa.1999.0442.
Begnudelli, L., and B. F. Sanders. 2007. “Simulation of the St. Francis dam-break flood.” J. Eng. Mech. 133 (11): 1200–1212. https://doi.org/10.1061/(ASCE)0733-9399(2007)133:11(1200).
Bermudez, A., and E. Vazquez. 1994. “Upwind methods for hyperbolic conservation-laws with source terms.” Comput. Fluids 23 (8): 1049–1071. https://doi.org/10.1016/0045-7930(94)90004-3.
Bradford, S. F., and B. F. Sanders. 2002. “Finite-volume model for shallow-water flooding of arbitrary topography.” J. Hydraul. Eng. 128 (3): 289–298. https://doi.org/10.1061/(ASCE)0733-9429(2002)128:3(289).
Brufau, P., M. E. Vázquez-Cendón, and P. García-Navarro. 2002. “A numerical model for the flooding and drying of irregular domains.” Int. J. Numer. Methods Fluids 39 (3): 247–275. https://doi.org/10.1002/fld.285.
Brunner, G. W. 2016. HEC-RAS river analysis systems user’s manual. Version 5.0. Davis, CA: USACE.
Brunner, G. W. 2018a. Benchmarking of the HEC-RAS two-dimensional hydraulic modeling capabilities. Davis, CA: USACE.
Brunner, G. W. 2018b. Verification and validation tests. Davis, CA: USACE.
Caleffi, V., A. Valiani, and A. Zanni. 2003. “Finite volume method for simulating extreme flood events in natural channels.” J. Hydraul. Res. 41 (2): 167–177. https://doi.org/10.1080/00221680309499959.
Casulli, V., and G. S. Stelling. 2011. “Semi-implicit subgrid modelling of three-dimensional free-surface flows.” Int. J. Numer. Methods Fluids 67 (4): 441–449. https://doi.org/10.1002/fld.2361.
Chanson, H. 2004. The hydraulics of open channel flows: An introduction. 2nd ed. Oxford, UK: Elsevier.
Chaudhry, M. H. 2008. Open-channel flow. 2nd ed. New York: Springer.
Chaudhry, M. H., A. G. Mercer, and D. E. Cass. 1983. “Modeling of slide-generated waves.” J. Hydraul. Eng. 109 (11): 1505–1520. https://doi.org/10.1061/(ASCE)0733-9429(1983)109:11(1505).
Chow, V. T. 1959. Open-channel hydraulics. Tokyo: McGraw-Hill.
Costabile, P., C. Costanzo, and F. Macchione. 2012. “Comparative analysis of overland flow models using finite volume schemes.” J. Hydroinf. 14 (1): 122–135. https://doi.org/10.2166/hydro.2011.077.
Cunge, J. A., F. M. Holly Jr., and A. Verwey. 1980. Practical aspects of computational river hydraulics. London: Pitman Publishing.
Defina, A. 2000. “Two-dimensional shallow flow equations for partially dry areas.” Water Resour. Res. 36 (11): 3251–3264. https://doi.org/10.1029/2000WR900167.
Delestre, O., C. Lucas, P. A. Ksinant, F. Darboux, C. Laguerre, T. N. T. Vo, F. James, and S. Cordier. 2013. “SWASHES: A compilation of shallow water analytic solutions for hydraulic and environmental studies.” Int. J. Numer. Methods Fluids 72 (3): 269–300. https://doi.org/10.1002/fld.3741.
De Marchi, G. 1945. “Sull’onda di piena che seguirebbe al crollo della diga di Cancano. [On the dam-break wave resulting from the collapse of the Cancano dam].” [In Italian.] L’Energia Elettrica 22 (1): 319–340.
D’Oria, M., A. Maranzoni, and M. Mazzoleni. 2019. “Probabilistic assessment of flood hazard due to levee breaches using fragility functions.” Water Resour. Res. 55 (11): 8740–8764. https://doi.org/10.1029/2019WR025369.
El Kadi Abderrezzak, K., R. Ata, P. Tassi, D. Wang, J.-M. Hervouet, and A. Die Moran. 2014. “2-D and 3-D numerical modeling of dam break waves over moveable beds.” In Proc., 11th Int. Conf. on Hydroinformatics. New York: CUNY Academic Works.
Erpicum, S., P. Archambeau, B. Dewals, S. Detrembleur, C. Fraikin, and M. Pirotton. 2004. “Computation of the Malpasset dam break with a 2D conservative flow solver on a multiblock structured grid.” In Proc., 6th Int. Conf. on Hydroinformatics, edited by S. Y. Liong, K. K. Phoon, and V. Babovic, 277–284. New York: World Scientific Publishing Company. https://doi.org/10.1142/9789812702838_0034.
Fraccarollo, L., and E. F. Toro. 1995. “Experimental and numerical assessment of shallow water model for two-dimensional dam-break type problems.” J. Hydraul. Res. 33 (6): 843–864. https://doi.org/10.1080/00221689509498555.
Goutal, N. 1999. “The Malpasset dam failure. An overview and test case definition.” In Proc., of the 4th CADAM meeting. Zaragoza, Spain: Univ. of Zaragoza.
Henderson, F. M. 1966. Open channel flows. New York: Macmillan.
Hervouet, J. M., and A. Petitjean. 1999. “Malpasset dam-break revisited with two-dimensional computation.” J. Hydraul. Res. 37 (6): 777–788. https://doi.org/10.1080/00221689909498511.
Hervouet, J.-M., E. Razafindrakoto, and C. Villaret. 2011. “Dealing with dry zones in free surface flows: A new class of advection schemes.” In Proc., 34th IAHR World Congress: 33rd Hydrology and Water Resources Symp. and 10th Conf. on Hydraulics in Water Engineering: Balance and Uncertainty—Water in a Changing World. Brisbane, Australia: Engineers Australia.
Horritt, M. S., and P. D. Bates. 2002. “Evaluation of 1D and 2D numerical models for predicting river flood inundation.” J. Hydrol. 268 (1–4): 87–99. https://doi.org/10.1016/S0022-1694(02)00121-X.
Hou, J., Q. Liang, F. Simons, and R. Hinkelmann. 2013. “A 2D well-balanced shallow flow model for unstructured grids with novel slope source term treatment.” Adv. Water Resour. 52 (Feb): 107–131. https://doi.org/10.1016/j.advwatres.2012.08.003.
ICOLD (International Commission on Large Dams). 1998. Dam-break flood analysis—Review and recommendations. Paris: ICOLD.
Jarrett, R. D., and J. E. Costa. 1986. Hydrology, geomorphology, and dam-break modeling of the July 15, 1982, Lawn Lake Dam and Cascade Lake Dam failures, Larimer County, Colorado. Washington, DC: US Government Printing Office.
MacDonald, I., M. J. Baines, and N. K. Nichols. 1997. “Analytic benchmark solutions for open-channel flows.” J. Hydraul. Eng. 123 (11): 1041–1045. https://doi.org/10.1061/(ASCE)0733-9429(1997)123:11(1041).
Martínez-Aranda, S., J. Fernández-Pato, D. Caviedes-Voullième, I. García-Palacín, and P. García-Navarro. 2018. “Towards transient experimental water surfaces: A new benchmark dataset for 2D shallow water solvers.” Adv. Water Resour. 121 (Nov): 130–149. https://doi.org/10.1016/j.advwatres.2018.08.013.
Milanesi, L., and M. Pilotti. 2019. “A conceptual model of vehicles stability in flood flows.” J. Hydraul. Res. 1–8. https://doi.org/10.1080/00221686.2019.1647887.
Milanesi, L., M. Pilotti, and B. Bacchi. 2016. “Using web-based observations to identify thresholds of a person’s stability in a flow.” Water Resour. Res. 52 (10): 7793–7805. https://doi.org/10.1002/2016WR019182.
Milanesi, L., M. Pilotti, A. Belleri, A. Marini, and S. Fuchs. 2018. “Vulnerability to flash floods: A simplified structural model for masonry buildings.” Water Resour. Res. 54 (10): 7177–7197. https://doi.org/10.1029/2018WR022577.
Milanesi, L., M. Pilotti, and R. Ranzi. 2015. “A conceptual model of people’s vulnerability to floods.” Water Resour. Res. 51 (1): 182–197. https://doi.org/10.1002/2014WR016172.
Molinaro, P., and L. Natale. 1994. “Modelling of flood propagation over initially dry areas.” Proc., Specialty Conf. Reston, VA: ASCE.
Morris, M. 2000. CADAM concerted action on dambreak modelling. Wallingford, UK: HR Wallingford.
Morris, M. 2005. IMPACT–Investigation of extreme flood processes and uncertainty, final technical report. London: Royal Society.
Nash, J. E., and J. V. Sutcliffe. 1970. “River flow forecasting through conceptual models part I—A discussion of principles.” J. Hydrol. 10 (3): 282–290. https://doi.org/10.1016/0022-1694(70)90255-6.
Néelz, S., and G. Pender. 2013. Benchmarking the latest generation of 2D hydraulic modelling packages. London: DEFRA/Environment Agency.
Paquier, A., and N. Goutal. 2016. “Dam and levee failures: An overview of flood wave propagation modelling.” Houille Blanche 1: 5–12. https://doi.org/10.1051/lhb/2016001.
Petaccia, G., C. Lai, C. Milazzo, and L. Natale. 2016. “The collapse of Sella Zerbino gravity dam.” Eng. Geol. 211 (Aug): 39–49. https://doi.org/10.1016/j.enggeo.2016.06.024.
Pianese, D., and L. Barbiero. 2004. “Discussion of ‘Case study: Malpasset dam-break simulation using a two-dimensional finite volume method.’ by Alessandro Valiani, Valerio Caleffi, and Andrea Zanni” J. Hydraul. Eng. 130 (9): 941–944. https://doi.org/10.1061/(ASCE)0733-9429(2004)130:9(941).
Pilotti, M. 2016. “Extraction of cross sections from digital elevation model for one-dimensional dam-break wave propagation in mountain valleys.” Water Resour. Res. 52 (1): 52–68. https://doi.org/10.1002/2015WR017017.
Pilotti, M., A. Maranzoni, L. Milanesi, M. Tomirotti, and G. Valerio. 2014. “Dam-break modeling in alpine valleys.” J. Mt. Sci. 11 (6): 1429–1441. https://doi.org/10.1007/s11629-014-3042-0.
Pilotti, M., A. Maranzoni, M. Tomirotti, and G. Valerio. 2011. “1923 Gleno dam-break: Case study and numerical modelling.” J. Hydraul. Eng. 137 (4): 480–492. https://doi.org/10.1061/(ASCE)HY.1943-7900.0000327.
Pilotti, M., M. Tomirotti, G. Valerio, and B. Bacchi. 2010. “Simplified method for the characterization of the hydrograph following a sudden partial dam break.” J. Hydraul. Eng. 136 (10): 693–704. https://doi.org/10.1061/(ASCE)HY.1943-7900.0000231.
Quirogaa, V. M., S. Kurea, K. Udoa, and A. Manoa. 2016. “Application of 2D numerical simulation for the analysis of the February 2014 Bolivian Amazonia flood: Application of the new HEC-RAS version 5.” Ribagua 3 (1): 25–33. https://doi.org/10.1016/j.riba.2015.12.001.
Ritter, A. 1892. “Die fortpflanzung der wasserwellen.” Vereine Deutcher Ingenieure Zeitswchrift 36 (33): 947–954.
Robb, D., and J. Vasquez. 2015. “Numerical simulation of dam-break flows using depth-averaged hydrodynamic and three-dimensional CFD models.” In Proc., Canadian Society for Civil Engineering Hydrotechnical Conf. Montreal: Canadian Society for Civil Engineering.
Roe, P. L. 1987. Linear advection schemes on triangular meshes. Cranfield, UK: Cranfield Institute of Technology.
Savant, G., C. Berger, T. O. McAlpin, and J. N. Tate. 2011. “Efficient implicit finite-element hydrodynamic model for dam and levee breach.” J. Hydraul. Eng. 137 (9): 1005–1018. https://doi.org/10.1061/(ASCE)HY.1943-7900.0000372.
Shustikova, I., A. Domeneghetti, J. C. Neal, P. Bates, and A. Castellarin. 2019. “Comparing 2D capabilities of HEC-RAS and LISFLOOD-FP on complex topography.” Hydrol. Sci. J. 64 (14): 1769–1782. https://doi.org/10.1080/02626667.2019.1671982.
Soares Frazão, S., M. W. Morris, and Y. Zech. 2000. Concerted action on dambreak modelling: Objectives, project report, test cases, meeting proceedings. Louvain-la-Neuve, Belgium: Université Catholique de Louvain.
Soares Frazão, S., and G. Testa. 1999. “The Toce River test case: Numerical results analysis.” In Proc., 3rd CADAM Workshop. Brussels, Belgium: European Commission.
Soares Frazão, S., and Y. Zech. 2007. “Experimental study of dam-break flow against an isolated obstacle.” Supplement, J. Hydraul. Res. 45 (S1): 27–36. https://doi.org/10.1080/00221686.2007.9521830.
Soares Frazão, S., Y. Zech, and M. Morris. 2003. “IMPACT, Investigation of extreme flood processes and uncertainty.” In Proc., 3rd IMPACT project workshop. London: Royal Society.
Stoker, J. J. 1948. “The formation of breakers and bores: The theory of nonlinear wave propagation in shallow water and open channels.” Commun. Appl. Math. 1 (1): 1–87. https://doi.org/10.1002/cpa.3160010101.
Su, S. T., and H. Barnes. 1970. “Geometric and frictional effects on sudden releases.” J. Hydraul. Div. 96 (11): 2185–2200.
TELEMAC Modelling System. 2014. “TELEMAC-2D software, release 7.0 user manual.” Accessed March 10, 2020. http://www.opentelemac.org/index.php/manuals/summary/13-telemac-2d/1058-telemac-2d-user-manual-en-v7p0.
TELEMAC Modelling System. 2015. “TELEMAC-2D software, validation document.” Accessed March 10, 2020. http://www.opentelemac.org/index.php/component/jdownloads/summary/29-validation/1398-telemac2d-validation-v7p0?Itemid=57.
Teng, J., A. J. Jakeman, J. Vaze, B. F. Croke, D. Dutta, and S. Kim. 2017. “Flood inundation modelling: A review of methods, recent advances and uncertainty analysis.” Environ. Modell. Software 90 (Apr): 201–216. https://doi.org/10.1016/j.envsoft.2017.01.006.
Testa, G., D. Zuccalà, F. Alcrudo, J. Mulet, and S. Soares Frazao. 2007. “Flash flood flow experiment in a simplified urban district.” Supplement, J. Hydraul. Res. 45 (S1): 37–44. https://doi.org/10.1080/00221686.2007.9521831.
Thacker, W. C. 1981. “Some exact-solutions to the non-linear shallow-water wave-equations.” J. Fluid Mech. 107 (6): 499–508. https://doi.org/10.1017/S0022112081001882.
Toro, E. F. 2001. Shock-capturing methods for free-surface shallow flows. Chichester, UK: Wiley.
Toro, E. F., and P. Garcia-Navarro. 2007. “Godunov–type methods for free-surface shallow flows: A review.” J. Hydraul. Res. 45 (6): 736–751. https://doi.org/10.1080/00221686.2007.9521812.
Touma, R., and F. Kanbar. 2018. “Well-balanced central schemes for two-dimensional systems of shallow water equations with wet and dry states.” Appl. Math. Modell. 62 (Oct): 728–750. https://doi.org/10.1016/j.apm.2018.06.032.
Valiani, A., V. Caleffi, and A. Zanni. 2002. “Case study: Malpasset dam-break simulation using a two-dimensional finite volume method.” J. Hydraul. Eng. 128 (5): 460–472. https://doi.org/10.1061/(ASCE)0733-9429(2002)128:5(460).
Wang, Y., Q. Liang, G. Kesserwani, and J. W. Hall. 2011. “A 2D shallow flow model for practical dam-break simulations.” J. Hydraul. Res. 49 (3): 307–316. https://doi.org/10.1080/00221686.2011.566248.
Yalin, M. S. 1977. The mechanics of sediment transport. Oxford, UK: Pergamon Press.
Information & Authors
Information
Published In
Copyright
©2020 American Society of Civil Engineers.
History
Received: May 23, 2019
Accepted: Feb 11, 2020
Published online: Mar 18, 2020
Published in print: Jun 1, 2020
Discussion open until: Aug 18, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.