Air Demand of Low-Level Outlets for Large Dams
Publication: Journal of Hydraulic Engineering
Volume 146, Issue 8
Abstract
Low-level outlets are key safety elements of reservoir dams, especially for structures with high heads. Their main purpose is the regulation and—if required—rapid drawdown of the reservoir water level in case of maintenance works or structural damage to the dam. A common outlet configuration for high-head structures uses a high-pressure vertical slide gate discharging into a free-flow tunnel. The high-speed water jet in the outlet tunnel leads to considerable air entrainment and transport, resulting in negative air pressures, which can aggravate problems with gate vibration, cavitation, and slug flow. Sufficient air supply via an air vent mitigates such problems. However, current methods for estimating the required air demand do not incorporate all factors affecting design of air vents for low-level outlets. Therefore, tests were conducted in a 20.6-m-long hydraulic scale model at heads up to 30 m, to improve the general understanding of aeration processes, to determine the governing parameters affecting air demand, and to formulate a new air demand design equation. The results show that air demand is mainly a function of the Froude number at the vena contracta. Furthermore, the new design equation enables quantifying the effects of the air vent loss coefficient, air vent size, tunnel slope, and tunnel length on air demand.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
The data that support the findings of this study are available from the first author upon reasonable request.
Acknowledgments
The first author was supported financially by the Swiss National Science Foundation (SNF), Grant 163415. The second author was supported by the Swiss Competence Center for Energy Research–Supply of Elecricity (SCCER-SoE), within the framework of which this study was conducted. The authors would like to thank Alexander Williams for his experimental work performed within the scope of his master thesis.
References
Bates, D. M., and D. G. Watts. 2008. Nonlinear regression analysis and its applications. Chichester, UK: Wiley. https://doi.org/10.1002/9780470316757.
Campbell, F. B., and B. Guyton. 1953. “Air demand in gated outlet works.” In Proc., 5th IAHR Congress. A Joint Meeting of Int. Association for Hydraulic Research and Hydraulics Div., 529–533. Reston, VA: ASCE.
Dettmers, D. 1953. Beitrag zur Frage der Belüftung von Tiefschützen (A Contribution to the Aeration of High-head Gates). [In German.] Hannover, Germany: Franzius-Institut Technische Hochschule Hannover.
Douma, H. 1955. “Hydraulic design criteria for reservoir outlets.” In Proc., 6th IAHR Congress, 1–20. Reston, VA: ASCE.
Edwini-Bonsu, S., and P. M. Steffler. 2006. “Dynamics of air flow in sewer conduit headspace.” J. Hydraul. Eng. 132 (8): 791–799. https://doi.org/10.1061/(ASCE)0733-9429(2006)132:8(791).
Falvey, H. T. 1980. Air-water hydraulic flow in structures. US Dept. of the Interior. Denver: Water and Power Resources Service.
Felder, S., and H. Chanson. 2009. “Turbulence, dynamic similarity and scale effects in high-velocity free-surface flows above a stepped chute.” Exp. Fluids 47 (1): 1–18. https://doi.org/10.1007/s00348-009-0628-3.
Felder, S., and H. Chanson. 2017. “Scale effects in microscopic air-water flow properties in high-velocity free-surface flows.” Exp. Thermal Fluid Sci. 83 (May): 19–36. https://doi.org/10.1016/j.expthermflusci.2016.12.009.
Fox, J. 2016. Applied regression analysis and generalized linear models. 3rd ed. Los Angeles: Sage.
Gardarsson, S. M., A. Gunnarsson, G. G. Tomasson, and M. Pfister. 2015. “Karahnjukar dam spillway: Comparison of operational data and results from hydraulic modelling.” In Proc. HYDRO 2015. Wallington: Aqua-Media International.
Ghetti, A., and G. Di Silvio. 1967. “Investigation on the running of deep gated outlet works from reservoirs.” In Proc., 9th ICOLD Congress, 837–852. Istanbul, Turkey: International Association for Hydraulic Research.
Guyton, B. 1958. “Field investigation of spillways and outlet works.” Trans. ASCE 124 (1): 491–506.
Heller, V. 2011. “Scale effects in physical hydraulic engineering models.” J. Hydraul. Res. 49 (3): 293–306. https://doi.org/10.1080/00221686.2011.578914.
Hohermuth, B. 2019. Aeration and two-phase flow characteristics of low-level outlets., edited by R. M. Boes. Zurich, Switzerland: ETH Zurich.
Kalinske, A. A., and J. M. Robertson. 1943. “Closed conduit flow.” Trans. ASCE 108 (1): 1435–1447.
Krzeczkowski, S. A. 1980. “Measurement of liquid droplet disintegration mechanisms.” Int. J. Multiphase Flow 6 (3): 227–239. https://doi.org/10.1016/0301-9322(80)90013-0.
Levin, L. 1965. Calcul hydraulique des conduits d’aération des vidanges de fond et dispositifs déversants (Hydraulic calculation of air vents for bottom outlets and diversion tunnels). [In French.]. Paris: Société Hydrotechnique de France.
Lier, P., and P. Volkart. 1994. “Prototype investigation on aeration and operation in the Cumera high head bottom outlet.” In Proc., 19th ICOLD Congress. Durban, South Africa.
Lynse, D. K., and O. Guttormsen. 1971. “Air demand in high head regulated outlet works.” In Vol. 5 of Proc., 14th IAHR Congress, 77–80. Paris: International Association for Hydraulic Research.
Montes, J. S. 1997. “Irrotational flow and real fluid effects under planar sluice gates.” J. Hydraul. Eng. 123 (3): 219–232. https://doi.org/10.1061/(ASCE)0733-9429(1997)123:3(219).
Mura, Y., S. Ijuin, and H. Nakagawa. 1959. “Air demand in conduits partly filled with flowing water.” In Proc., 8th Congress International Association for Hydraulic Research. Montréal: International Association for Hydraulic Research.
Ohnesorge, W. 1936. “Die Bildung von Tropfen an Düsen und die Auflösung flüssiger Strahlen (The formation of drops at valves and the disintegration of liquid jets).” [In German.] Zeitschrift für angewandte Mathematik und Mechanik 16 (6): 355–358. https://doi.org/10.1002/zamm.19360160611.
Pfister, M., and H. Chanson. 2012. “Discussion of ‘Scale effects in physical hydraulic engineering models’ by V. Heller.” J. Hydraul. Res. 50 (2): 244–246. https://doi.org/10.1080/00221686.2012.654671.
Qian, Y., D. Z. Zhu, W. M. Zhang, N. Rajaratnam, S. Edwini-Bonsu, and P. Steffler. 2017. “Air movement induced by water flow with a hydraulic jump in changing slope pipes.” J. Hydraul. Eng. 143 (4): 04016092. https://doi.org/10.1061/(ASCE)HY.1943-7900.0001252.
Rabben, S. L. 1984. Untersuchung der Belüftung an Tiefschützen unter besonderer Berücksichtigung von Massstabseffekten (Investigation of aeration of high-head gates under special consideration of scale effects). [In German.]. Aachen, Germany: Institut für Wasserbau und Wasserwirtschaft.
Rabben, S. L., and G. Rouve. 1984. “Air demand of high head gates-model-family studies to quantify scale effects.” In Proc., IAHR Symp. on Scale Effects in Modelling Hydraulic Structures, 4.9-1–4.9-3. Esslingen, Germany: International Association for Hydraulic Research.
Sakhuja, V. S., T. C. Paul, and S. Singh. 1984. “Air entrainment distortion in free surface flows.” In Proc., Int. Symp. on Scale Effects in Modelling Hydraulic Structures, 4.8.1–4.8.4. Esslingen, Germany: International Association for Hydro-Environment Engineering and Research.
Schilling, H. 1963. “Luftmengenmessungen in Grundablässen von Stauanlagen (Air Discharge Measurements in Bottom Outlets of Dams).” [In German.] Escher Wyss Mitteilungen 36 (2/3): 41–47.
Sharma, H. R. 1973. “Air demand for high head gated conduits.” Ph.D. thesis. River and Harbour Laboratory at the Technical Univ. of Norway.
Sharma, H. R. 1976. “Air-entrainment in high head gated conduits.” J. Hydraul. Div. 102 (11): 1629–1646.
Skripalle, J. 1994. Zwangsbelüftung von Hochgeschwindigkeitsströmungen an zurückspringenden Stufen im Wasserbau (Forced aeration of high-velocity jets at backward facing steps in hydaulic constructions). [In German.]. Berlin: Institut für Wasserbau und Wasserwirtschaft der TU Berlin.
Speerli, J. 1999. Strömungsprozesse in Grundablassstollen (Hydraulics of bottom outlets). [In German.], edited by H.-E. Minor. Zurich, Switzerland: ETH Zurich.
Speerli, J., and W. H. Hager. 2000. “Air-water flow in bottom outlets.” Can. J. Civ. Eng. 27 (3): 454–462. https://doi.org/10.1139/l99-087.
Tullis, B., and J. Larchar. 2011. “Determining air demand for small- to medium-sized embankment dam low-level outlet works.” J. Irrig. Drain. Eng. 137 (12): 793–800. https://doi.org/10.1061/(ASCE)IR.1943-4774.0000345.
USACE. 1954a. Slide gate tests, Norfork dam North Fork River, Arkansas. Washington, DC: USACE.
USACE. 1954b. Tainter gate tests, Norfork dam, North Fork River, Arkansas. Washington, DC: USACE.
USACE. 1964. Air demand—Regulated outlet works. Washington, DC: USACE.
USACE. 1980. Hydraulic design of reservoir outlet works. Washington, DC: USACE.
Vischer, D., and W. H. Hager. 1998. Dam hydraulics. Chichester, UK: Wiley.
Volkart, P. 1980. “The mechanism of air bubble entrainment in self-aerated flow.” Int. J. Multiphase Flow 6 (5): 411–423. https://doi.org/10.1016/0301-9322(80)90003-8.
Volkart, P., and J. Speerli. 1994. “Prototype investigation of the high velocity flow in the high head tunnel outlet of the Panix dam.” In Proc., 19th ICOLD Congress, 55–78. Paris: International Commission on Large Dams.
Wisner, P. 1967. “Hydraulic design for flood control by high head gated outlets.” In Proc., 9th ICOLD Congress, 495–507. Paris: International Commission on Large Dams.
Wright, N. W., and B. P. Tullis. 2014. “Prototype and laboratory low-level outlet air demand comparison for small to medium-sized embankment dams.” J. Irrig. Drain. Eng. 140 (6): 04014013. https://doi.org/10.1061/(ASCE)IR.1943-4774.0000712.
Wunderlich, W. 1963. “Die Grundablässe an Talsperren, Teil 2 (Bottom outlets of dams, Part 2).” [In German.] Wasserwirtschaft 53 (4): 106–114.
Information & Authors
Information
Published In
Journal of Hydraulic Engineering
Volume 146 • Issue 8 • August 2020
Copyright
©2020 American Society of Civil Engineers.
History
Received: Dec 5, 2018
Accepted: Feb 5, 2020
Published online: May 31, 2020
Published in print: Aug 1, 2020
Discussion open until: Oct 31, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.