Blocks Stability in Plunge Pools under Turbulent Rectangular Jets
Publication: Journal of Hydraulic Engineering
Volume 145, Issue 4
Abstract
Energy dissipation through a rectangular jet discharging into a plunge pool is a common approach in dams engineering. This paper presents the results of a new experimental study on the pressure field generated by a rectangular nonaerated jet impinging on the bottom of a plunge pool, with reference to plunge pools confined by the presence of a drop structure at the upstream boundary. The mean dynamic pressure and fluctuating pressure components at the bottom of a plunge pool were measured and analyzed to define the features that are required in the evaluation of the stability of rock blocks in the plunge pool. The forces acting on blocks in the impingement region were computed, and from this, it was found that the effect of the mean dynamic pressure can be neglected compared with the effect of pressure fluctuations. Because the block stability depends only on the fluctuating pressure coefficient in the jet impingement region, this allows the use of experimental data reported in the literature to extend the range of applicability of this experimental study. This finding can be applied to any block shape. To highlight the application of the results, a design example is presented in this paper where the scale effect due to aeration is taken into account.
Get full access to this article
View all available purchase options and get full access to this article.
References
Asadollahi, P., F. Tonon, M. Federspiel, and A. Schleiss. 2011. “Prediction of rock block stability and scour depth in plunge pools.” J. Hydraul. Res. 49 (6): 750–756.https://doi.org/10.1080/00221686.2011.618055.
Barjastehmaleki, S. 2016. “Spillway stilling basins and plunge pools lining design.” Ph.D. thesis, Dept. of Engineering and Architecture, Univ. of Trieste.
Barjastehmaleki, S., and V. Fiorotto. n.d. “Scour due to a falling plane jet: A comprehensive approach.” J. Hydraul. Eng., inpress. https://doi.org/10.1061/(ASCE)HY.1943-7900.0001564.
Barjastehmaleki, S., V. Fiorotto, and E. Caroni. 2015. “Stochastic analysis of pressure field in hydraulic jump region via Taylor hypothesis.” In Proc., 36th IAHR World Congress, 1–12. Madrid, Spain: International Association for Hydro-Environment Engineering and Research.
Barjastehmaleki, S., V. Fiorotto, and E. Caroni. 2016a. “Design of stilling basin linings with sealed and unsealed joints.” J. Hydraul. Eng. 142 (12): 04016064. https://doi.org/10.1061/(ASCE)HY.1943-7900.0001218.
Barjastehmaleki, S., V. Fiorotto, and E. Caroni. 2016b. “Spillway stilling basins lining design via Taylor hypothesis.” J. Hydraul. Eng. 142 (6): 04016010. https://doi.org/10.1061/(ASCE)HY.1943-7900.0001133.
Beltaos, S., and N. Rajaratnam. 1973. “Plain turbulent impinging jet.” J. Hydraul. Res. 11 (1): 29–59. https://doi.org/10.1080/00221687309499789.
Bollaert, E. 2002. “Transient water pressures in joints and formation of rock scour due to high—Velocity jet impact.” In Communication No. 13 of the Laboratory of Hydraulic Construction, edited by A. Schleiss. Lausanne, Switzerland: École polytechnique fédérale de Lausanne.
Bollaert, E., R. Duarte, M. Pfister, and D. Mazvidza. 2012. “Physical and numerical model study investigating plunge pool scour at Kariba Dam.” In Proc., 24th Congress of CIGB—International Commission on Large Dams, 241–248. Kyoto, Japan.
Bollaert, E., and A. Schleiss. 2003. “Scour of rock due to the impact of plunging high velocity jets. Part II: Experimental results of dynamic pressures at pool bottoms and in one- and two-dimensional closed-end rock joints.” J. Hydraul. Res. 41 (5): 451–464. https://doi.org/10.1080/00221680309499992.
Bollaert, E., and A. Schleiss. 2005. “Physically based model for evaluation of rock scour due to high velocity jet impact.” J. Hydraul. Eng. 131 (3): 153–165. https://doi.org/10.1061/(ASCE)0733-9429(2005)131:3(153).
Capuozzo, L., G. Flores, O. Jiménez, and D. Bacchiega. 2015. “Model studies of the Chucás hydroelectric project.” In Proc., Hydropower 15, Stavanger. Paris: International Commission on Large Dams.
Castillo, L. G., and J. M. Carrillo. 2016. “Scour, velocities and pressures evaluations produced by Spillway and outlets of dam.” Water 8 (3): 68. https://doi.org/10.3390/w8030068.
Castillo, L. G., J. M. Carrillo, and A. Blazquez. 2014. “Plunge pool dynamic pressures: a temporal analysis in the nappe flow case.” J. Hydraul. Res. 53 (1): 101–118. https://doi.org/10.1080/00221686.2014.968226.
Chanson, H. 1997. Air bubble entrainment in free-surface turbulent shear flows. London: Academic Press.
Cola, R. 1965. “Energy dissipation of a high-velocity vertical jet entering.” In Proc., 11th International Association for Hydro-Environment Engineering and Research Congress. Madrid, Spain: International Association for Hydro-Environment Engineering and Research.
Duarte, R., A. Pinheiro, and A. J. Schleiss. 2016. “Dynamic response of an embedded block impacted by aerated high-velocity jets.” J. Hydraul. Res. 54 (4): 399–409. https://doi.org/10.1080/00221686.2016.1168491.
Duarte, R., A. J. Schleiss, and A. Pinheiro. 2015. “Influence of jet aeration on pressures around a block embedded in a plunge pool bottom.” Environ. Fluid Mech. 15 (3): 673–693. https://doi.org/10.1007/s10652-014-9392-x.
Ervine, D. A., and H. T. Falvey. 1987. “Behaviour of turbulent water jets in the atmosphere and in plunge pools.” Proc. Inst. Civ. Eng. Part 2 83 (1): 295–314. https://doi.org/10.1680/iicep.1987.353.
Ervine, D. A., H. T. Falvey, and W. Withers. 1997. “Pressure fluctuations on plunge pool floors.” J. Hydraul. Res. 35 (2): 257–279. https://doi.org/10.1080/00221689709498430.
Fiorotto, V., S. Barjastehmaleki, and E. Caroni. 2016. “Stability analysis of plunge pool linings.” J. Hydraul. Eng. 142 (11): 04016044. https://doi.org/10.1061/(ASCE)HY.1943-7900.0001175.
Fiorotto, V., and E. Caroni. 2014. “Unsteady seepage applied to lining design in stilling basins.” J. Hydraul. Eng. 140 (7): 04014025. https://doi.org/10.1061/(ASCE)HY.1943-7900.0000867.
Fiorotto, V., and A. Rinaldo. 1992a. “Fluctuating uplift and lining design in spillway stilling basins.” J. Hydraul. Eng. 118 (4): 578–596. https://doi.org/10.1061/(ASCE)0733-9429(1992)118:4(578).
Fiorotto, V., and A. Rinaldo. 1992b. “Turbulent pressure fluctuations under hydraulic jump.” J. Hydraul. Res. 30 (4): 499–520. https://doi.org/10.1080/00221689209498897.
Heller, V. 2011. “Scale effects in physical hydraulic engineering models.” J. Hydraul. Res. 49 (3): 293–306. https://doi.org/10.1080/00221686.2011.578914.
Kotsovinos, N. E. 1976. “A note on the spreading rate and virtual origin of a plane turbulent jet.” J. Fluid Mech. 77 (2): 305–311. https://doi.org/10.1017/S0022112076002127.
Kotsovinos, N. E. 1978. “A note on the conservation of the axial momentum of a turbulent jet.” J. Fluid Mech. 87 (1): 55–63. https://doi.org/10.1017/S002211207800292X.
Kotsovinos, N. E., and P. B. Angelidis. 1991. “The momentum flux in turbulent submerged jets.” J. Fluid Mech. 229 (-1): 453–470. https://doi.org/10.1017/S0022112091003105.
Li, A., and P. Liu. 2010. “Mechanism of rock-bed scour due to impinging jet.” J. Hydraul. Res 48 (1): 14–22. https://doi.org/10.1080/00221680903565879.
Liu, P. Q., J. R. Dong, and C. Yu. 1998. “Experimental investigation of fluctuation uplift on rock blocks at the bottom of the scour pool downstream of Three-Gorges spillway.” J. Hydraul. Res. 36 (1): 55–68. https://doi.org/10.1080/00221689809498377.
Liu, P. Q., and A. Li. 2007. “Model discussion of pressure fluctuations propagation within lining slab joints in stilling basins.” J. Hydraul. Eng. 133 (6): 618–624. https://doi.org/10.1061/(ASCE)0733-9429(2007)133:6(618).
Lopardo, R. A., and R. E. Henning. 1985. “Experimental advances on pressure fluctuation beneath hydraulic jumps.” In Vol. 3 of Proc., 21st Congress on International Association for Hydro-Environment Engineering and Research. Melbourne, Australia: International Association of Hydraulic Research.
Maleki, S., J. Apostolidis, T. Ewing, and V. Fiorotto. 2017. “CFD simulation of pressure fluctuations in plunge pools: In search of a new method.” In Proc., Australian National Committee of Large Dams. Hobrat, Australia.
Manso, P., E. Bollaert, and A. Schleiss. 2009. “Influence of plunge pool geometry on high-velocity jet impact pressures and pressure propagation inside fissured rock media.” J. Hydraul. Eng. 135 (10): 783–792. https://doi.org/10.1061/(ASCE)HY.1943-7900.0000090.
Martins, R. 1973. “Contribution to the knowledge on the scour action of free jets on rocky river-beds.” In Proc., 11th International Commission on Large Dams Congress, 799–814. Paris: International Commission on Large Dams.
Marson, C., V. Fiorotto, and E. Caroni. 2007. “Lining design in spillway stilling basins.” In Proc., 5th Int. Conf. on Dam Engineering, 299–306. Lisbon, Portugal.
Melo, J. F., A. N. Pinheiro, and C. M. Ramos. 2006. “Forces on plunge pool slabs: Influence of joints location and width.” J. Hydraul. Eng. 132 (1): 49–60. https://doi.org/10.1061/(ASCE)0733-9429(2006)132:1(49).
Pfister, M., W. H. Hager, and R. M. Boes. 2014. “Trajectories and air flow features of ski jump-generated jets.” J. Hydraul. Res. 52 (3): 336–346. https://doi.org/10.1080/00221686.2013.875072.
Pinheiro, A. N., and J. F. Melo. 2008. “Effect of jet aeration on hydrodynamic forces on plunge pool floors.” Can. J. Civ. Eng. 35 (5): 521–530. https://doi.org/10.1139/l07-138.
Puertas, J. 1994. “Criterios hidráulicos para el diseño de cuencos de disipación de energía en presas bóveda con vertido libre por coronación.” [In Spanish.] Ph.D. thesis, Departamento de Ingeniería Hidráulica, Marítima y Ambiental, Universidad Politécnica de Cataluña.
Rubel, A. 1980. “Computations of jet impingement on a flat surface.” AIAA J. 18 (2): 168–175. https://doi.org/10.2514/3.50746.
Toso, J. W., and C. E. Bowers. 1988. “Extreme pressures in hydraulic jump stilling basins.” J. Hydraul. Eng. 114 (8): 829–843. https://doi.org/10.1061/(ASCE)0733-9429(1988)114:8(829).
Tu, C. V., and D. H. Wood. 1996. “Wall pressure and shear stress measurement beneath an impinging jet.” Exp. Therm. Fluid Sci. 13 (4): 364–373. https://doi.org/10.1016/S0894-1777(96)00093-3.
Ursino, N., P. Salandin, and L. Da Deppo. 2003. “Fluctuating pressures at the bottom of a plunge pool.” In Proc., 30th International Association for Hydro-Environment Engineering and Research Congress, 1–8. Thessaloniki, Greece.
Information & Authors
Information
Published In
Copyright
©2019 American Society of Civil Engineers.
History
Received: Jan 30, 2018
Accepted: Sep 10, 2018
Published online: Jan 28, 2019
Published in print: Apr 1, 2019
Discussion open until: Jun 28, 2019
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.