Energy Dissipation of a Type III Basin under Design and Adverse Conditions for Stepped and Smooth Spillways
This article has a reply.
VIEW THE REPLYThis article has a reply.
VIEW THE REPLYPublication: Journal of Hydraulic Engineering
Volume 144, Issue 7
Abstract
New information regarding the influence of a stepped chute on the hydraulic performance of the United States Bureau of Reclamation (Reclamation) Type III hydraulic jump stilling basin is presented for design (steady) and adverse (decreasing tailwater) conditions. Using published experimental data and computational fluid dynamics (CFD) models, this paper presents a detailed comparison between smooth-chute and stepped-chute configurations for chute slopes of 0.8H:1V and 4H:1V and Froude numbers () ranging from 3.1 to 9.5 for a Type III basin designed for = 8. For both stepped and smooth chutes, the relative role of each basin element was quantified, up to the most hydraulic extreme case of jump sweep-out. It was found that, relative to a smooth chute, the turbulence generated by a stepped chute causes a higher maximum velocity decay within the stilling basin, which represents an enhancement of the Type III basin’s performance but also a change in the relative role of the basin elements. Results provide insight into the ability of the CFD models [unsteady Reynolds-averaged Navier-Stokes (RANS) equations with renormalization group (RNG) turbulence model and volume-of-fluid (VOF) for free surface tracking] to predict the transient basin flow structure and velocity profiles. Type III basins can perform adequately with a stepped chute despite the effects steps have on the relative role of each basin element. It is concluded that the classic Type III basin design, based upon methodology by reclamation specific to smooth chutes, can be hydraulically improved for the case of stepped chutes for design and adverse flow conditions using the information presented herein.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors thank Dr. Amador for sharing his PIV data on stepped spillways, Dr. Castro-Orgaz for sharing historical data he gathered on smooth spillways, and Dr. Zhang and Prof. Chanson for sharing their velocity data on stepped spillways. The authors also thank Mr. Frizell and Mr. Burgi (retired, Reclamation) for their comments during the preparation of this work.
References
Amador, A., M. Sánchez-Juny, and J. Dolz. 2006. “Characterization of the nonaerated flow region in a stepped spillway by PIV.” J. Fluids Eng. 128 (6): 1266–1273. https://doi.org/10.1115/1.2354529.
Amador, A., M. Sánchez-Juny, and J. Dolz. 2009. “Developing flow region and pressure fluctuations on steeply sloping stepped spillways.” J. Hydraul. Eng. 135 (12): 1092–1100. https://doi.org/10.1061/(ASCE)HY.1943-7900.0000118.
Bauer, W. J. 1951. “The development of the turbulent boundary layer on steep slopes.” Ph.D. thesis, Univ. of Iowa.
Bayon, A., D. Valero, R. Garcia-Bartual, F. J. Valles-Moran, and P. A. Lopez-Jimenez. 2016. “Performance assessment of OpenFOAM and FLOW-3D in the numerical modeling of a low Reynolds number hydraulic jump.” Environ. Modell. Software 80: 322–335. https://doi.org/10.1016/j.envsoft.2016.02.018.
Belanger, J. 1841. Notes sur l’Hydraulique [Notes on Hydraulic Engineering], 223. [In French.] Paris: École Royale des Ponts et Chaussées.
Blaisdell, F. W. 1959. The SAF stilling basin: A structure to dissipate the destructive energy in high-velocity flow from spillways. Washington, DC: U.S. Dept. of Agriculture, Agricultural Research Service.
Bombardelli, F. A., I. Meireles, and J. Matos. 2011. “Laboratory measurements and multi-block numerical simulations of the mean flow and turbulence in the non-aerated skimming flow region of steep stepped spillways.” Environ. Fluid Mech. 11 (3): 263–288. https://doi.org/10.1007/s10652-010-9188-6.
Bormann, K. 1968. Der Sbfluss in Schussrinnen unter Berücksichtigung der Luftaufnahme. [In German.]. München, Germany: Versuchsanstalt für Wasserbau, Oskar von Miller Institut, Technische Hochschule.
Bradley, J. N., and A. J. Peterka. 1957. “The hydraulic design of stilling basins: Hydraulic jumps on a horizontal apron (basin I).” J. Hydraul. Div. 83 (5): 1–24.
Bradshaw, P., B. E. Launder, and J. L. Lumley. 1996. “Collaborative testing of turbulence models.” J. Fluids Eng. 118 (2): 243–247. https://doi.org/10.1115/1.2817369.
Bung, D. B. 2011. “Developing flow in skimming flow regime on embankment stepped spillways.” J. Hydraul. Res. 49 (5): 639–648. https://doi.org/10.1080/00221686.2011.584372.
Bung, D. B., Q. Sun, I. Meireles, T. Viseu, and J. Matos. 2012. “USBR type III stilling basin performance for steep stepped spillways.” In Proc., 4th IAHR Int. Symp. on Hydraulic Structures. Porto, Portugal.
Cain, P., and I. R. Wood. 1981. “Measurements of self-aerated flow on a spillway.” J. Hydraul. Div. 107 (11): 1425–1444.
Carvalho, R. F., C. M. Lemos, and C. M. Ramos. 2008. “Numerical computation of the flow in hydraulic jump stilling basins.” J. Hydraul. Res. 46 (6): 739–752. https://doi.org/10.1080/00221686.2008.9521919.
Castro-Orgaz, O. 2010. “Velocity profile and flow resistance models for developing chute flow.” J. Hydraul. Eng. 136 (7): 447–452. https://doi.org/10.1061/(ASCE)HY.1943-7900.0000190.
Celik, I. B., U. Ghia, and P. J. Roache. 2008. “Procedure for estimation and reporting of uncertainty due to discretization in CFD applications.” J. Fluids Eng. 130 (7): 1–4. https://doi.org/10.1115/1.2960953.
Chanson, H. 1994. Hydraulic design of stepped cascades, channels, weirs, and spillways. Oxford, UK: Pergamon Press.
Chanson, H. 2002. The hydraulics of stepped chutes and spillways. Lisse, Netherlands: A.A. Balkema.
Chanson, H., and T. Brattberg. 2000. “Experimental study of the air-water shear flow in a hydraulic jump.” Int. J. Multiphase Flow 26 (4): 583–607. https://doi.org/10.1016/S0301-9322(99)00016-6.
Chanson, H., D. B. Bung, and J. Matos. 2015. “Stepped spillways and cascades.” In Energy dissipation in hydraulic structures, edited by H. Chanson. Leiden, Netherlands: CRC Press.
Felder, S., and H. Chanson. 2013. “Aeration, flow instabilities, and residual energy on pooled stepped spillways of embankment dams.” J. Irrig. Drain. Eng. 139 (10): 880–887. https://doi.org/10.1061/(ASCE)IR.1943-4774.0000627.
Felder, S., and H. Chanson. 2015. “Simple design criterion for residual energy on embankment dam stepped spillways.” J. Hydraul. Eng. 142 (4): 04015062. https://doi.org/10.1061/(ASCE)HY.1943-7900.0001107.
Frizell, K. H. 1990a. Final model study results for Milltown Hill Dam spillway and stilling basin. Denver: United States Bureau of Reclamation.
Frizell, K. H. 1990b. Hydraulic model study of McClure Dam existing and proposed RCC stepped spillways. Denver: United States Bureau of Reclamation.
Frizell, K. W. 2009. Cavitation potential of the Folsom auxiliary spillway stilling basin baffle blocks: Laboratory studies. Denver: United States Bureau of Reclamation.
Frizell, K. W., J. P. Kubitschek, and J. Matos. 2009. “Stilling basin performance for stepped spillways of mild to steep slopes: Type III Basins.” In Proc., 33rd IAHR Congress: Water Engineering for a Sustainable Environment, 2301–2307. Madrid, Spain: IAHR.
Frizell, K. W., C. Svoboda, and J. Matos. 2016. “Performance of type III stilling basins for stepped spillways.” In Proc., Protections 2016: 2nd Int. Fort Collins, CO: Seminar on Dam Protection Against Overtopping.
Frizell, K. W., and C. D. Svoboda. 2012. “Performance of type III stilling basins: Stepped spillway studies. Do stepped spillways affect traditional design parameters?”, Denver: United States Bureau of Reclamation.
Hager, W. H. 1992. Energy dissipators and hydraulic jump. Dordrecht, Netherlands: Kluwer Academic Publishers.
Hirsch, C. 2007. Numerical computation of internal and external flows: The fundamentals of computational fluid dynamics. Oxford, UK: Butterworth-Heinemann.
Hirt, C. W., and B. D. Nichols. 1981. “Volume of fluid (VOF) method for the dynamics of free boundaries.” J. Comput. Phys. 39 (1): 201–225. https://doi.org/10.1016/0021-9991(81)90145-5.
Hirt, C. W., and J. M. Sicilian. 1985. “A porosity technique for the definition of obstacles in rectangular cell meshes.” In Proc., 4th Int. Conf. on Ship Hydro-dynamics, 1–19. Washington, DC: National Academy of Sciences.
Hunt, S. 2008. “Design of converging stepped spillways.” Ph.D. dissertation, Colorado State Univ.
Hunt, S. L., and K. C. Kadavy. 2010. “Energy dissipation on flat-sloped stepped spillways. 1: Upstream of the inception point.” Trans. ASABE 53 (1): 103–109. https://doi.org/10.13031/2013.29506.
Hunt, S. L., K. C. Kadavy, and B. M. Crookston. 2017. “Discussion of ‘Simple design criterion for residual energy on embankment dam stepped spillways’ by Stefan Felder and Hubert Chanson.” J. Hydraul. Eng. 143 (5): 07017001. https://doi.org/10.1061/(ASCE)HY.1943-7900.0001283.
Hunt, S. L., K. C. Kadavy, and G. J. Hanson. 2014. “Simplistic design methods for moderate-sloped stepped chutes.” J. Hydraul. Eng. 140 (12): 04014062. https://doi.org/10.1061/(ASCE)HY.1943-7900.0000938.
Katsuria, R. M. 2005. Hydraulic design of spillways and energy dissipators. New York: Marcel Dekker.
Kawagoshi, N., and W. H. Hager. 1990. “B-jump in sloping channel, II.” J. Hydraul. Res. 28 (4): 461–480. https://doi.org/10.1080/00221689009499060.
Kramer, K. 2004. “Development of aerated chute flow.” Ph.D. thesis, ETH Zürich.
Matos, J., and I. Meireles. 2014. “Hydraulics of stepped weirs and dam spillways: Engineering challenges, labyrinths of research.” In Proc., 5th IAHR Int. Symp. on Hydraulic Structures, edited by H. Chanson, and L. Toombes, 1–30. Brisbane, Australia.
Meireles, I., and J. Matos. 2009. “Skimming flow in the nonaerated region of stepped spillways over embankment dams.” J. Hydraul. Eng. 135 (8): 685–689. https://doi.org/10.1061/(ASCE)HY.1943-7900.0000047.
Minor, H. E., and W. H. Hager. 2000. Hydraulics of stepped spillways. Rotterdam, Netherlands: A.A. Balkema.
Novak, P., A. Moffat, C. Nalluri, and R. Narayanan. 2007. Hydraulic structures. 4th ed. Abingdon, Oxon: E&FN Spon.
Ohtsu, I., and Y. Yasuda. 1991. “Hydraulic jump in sloping channels.” J. Hydraul. Eng. 117 (7): 905–921. https://doi.org/10.1061/(ASCE)0733-9429(1991)117:7(905).
Peterka, A. J. 1978. Hydraulic design of spillways and energy dissipators. Engineering Monograph 25. Denver: United States Dept. of the Interior. Bureau of Reclamation.
Pope, S. B. 2000. Turbulent flows. Cambridge, UK: Cambridge University Press.
Prosperetti, A., and G. Tryggvason. 2007. Computational methods for multiphase flow. Cambridge, UK: Cambridge University Press.
Rajaratnam, N. 1962. “An experimental study of air entrainment characteristics of the hydraulic jump.” J. Inst. Eng. India 42 (7): 247–273.
Rajaratnam, N. 1976. Turbulent jets. New York: Elsevier.
Rouse, H., T. Siao, and S. Nagaratnam. 1958. “Turbulence characteristics of the hydraulic jump.” J. Hydraul. Div. 84 (HY1): 1–30.
Saad, Y. 2003. Iterative methods for sparse linear systems. Philadelphia, PA: Society for Industrial and Applied Mathematics.
Schwalt, M., and W. H. Hager. 1992. “Die Strahlbox (the jetbox).” [In German.] Schweizer Ingenieur und Architekt 110 (27–28): 547–549.
Shearin-Feimster, L. E., B. M. Crookston, and S. Felder. 2015. “Design approaches and numerical modeling of a stepped spillway under high tailwater conditions.” In Proc., 35th Annual USSD Conf. Louisville, KY.
Valero, D., D. Bung, B. M. Crookston, and J. Matos. 2016. “Numerical investigation of USBR type III stilling basin performance downstream of smooth and stepped spillways.” In Proc., 6th IAHR Int. Symp. on Hydraulic Structures and Water System Management, edited by B. Crookston and B. Tullis, 652–663. Portland, OR.
Valero, D., and D. B. Bung. 2015. “Hybrid investigations of air transport processes in moderately sloped stepped spillway flows.” In Proc., 36th IAHR World Congress. Hague, Netherlands.
Valero, D., and R. Garcia-Bartual. 2016. “Calibration of an air entrainment model for CFD spillway applications.” In Advances in hydroinformatics, 571–582. Singapore: Springer.
Valero, D., R. García-Bartual, and J. Marco. 2015. “Optimisation of stilling basin chute blocks using a calibrated multiphase RANS model.” In Proc., 5th Int. Junior Researcher and Engineer Workshop on Hydraulic Structures. Liege, Belgium: Univ. of Liege.
Wilcox, D. C. 2006. Turbulence modelling for CFD, 3rd ed. La Cañada, CA: DCW Industries.
Yakhot, V., and S. A. Orszag. 1986. “Renormalization group analysis of turbulence. I: Basic theory.” J. Sci. Comput. 1 (1): 3–51. https://doi.org/10.1007/BF01061452.
Yakhot, V., S. A. Orszag, S. Thangam, T. B. Gatski, and C. G. Speziale. 1992. “Development of turbulence models for shear flows by a double expansion technique.” Phys. Fluids A 4 (7): 1510–1520. https://doi.org/10.1063/1.858424.
Zhang, G., and H. Chanson. 2016a. “Hydraulics of the developing flow region of stepped spillways. I: Physical modeling and boundary layer development.” J. Hydraul. Eng. 142 (7): 04016015. https://doi.org/10.1061/(ASCE)HY.1943-7900.0001138.
Zhang, G., and H. Chanson. 2016b. “Hydraulics of the developing flow region of stepped spillways. II: Pressure and velocity fields.” J. Hydraul. Eng. 142 (7): 04016016. https://doi.org/10.1061/(ASCE)HY.1943-7900.0001136.
Information & Authors
Information
Published In
Copyright
©2018 American Society of Civil Engineers.
History
Received: May 17, 2017
Accepted: Jan 5, 2018
Published online: Apr 30, 2018
Published in print: Jul 1, 2018
Discussion open until: Sep 30, 2018
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.