Comprehensive and Quality-Controlled Bedload Transport Database
Publication: Journal of Hydraulic Engineering
Volume 143, Issue 2
Abstract
The processes involved in bed-load sediment transport are complex and difficult to quantify. Field measurements provide insight and a chance to improve predictive methods. A comprehensive database is described that contains more than 15,000 observations from nearly 500 data sets of bed-load sediment transport. Observations are compiled from published sources, author responses to queries, and personal visits to offices. Each entry has been checked twice for accuracy against the original data and converted to a common set of units. The database contains sections for sample descriptions, discharge and transport data, channel and bankfull characteristics, surface and subsurface grain size distributions, and, where possible, stream classification descriptors. Discharges range from far below to several times bankfull values. The database is freely available to the public and may be accessed via direct download and through WaterML based web services from the BYU World Water Data Sediment Transport Database portal at http://worldwater.byu.edu/app/index.php/sediment. The intent of this database is to provide useful data to researchers as they continue to investigate bed-load transport processes. Data can be added to the database by contacting the authors.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This research was jointly funded by the USDA Forest Service Rocky Mountain Research Station and the U.S. Fish and Wildlife Service. Thanks to the numerous researchers who contributed to this work. Appreciation is also expressed for the thoughtful insight and direction from an advisory committee consisting of John Buffington, Yantao Cui, Marwan Hassan, Gary Parker, and Tim Randle. Peter Wilcock’s advice and encouragement was also enormously helpful. Finally, the invitation by David Rosgen to his office to make his records available for inclusion in the database is acknowledged.
References
Barry, J. J. (2007). “Bed load transport in gravel-bed rivers.” Ph.D. thesis, Univ. of Idaho, Moscow, ID.
Barry, J. J., Buffington, J. M., Goodwin, P., King, J. G., and Emmett, W. W. (2008). “Performance of bed-load transport equations relative to geomorphic significance: Predicting effective discharge and its transport rate.” J. Hydraul. Eng., 601–615.
BYU (Brigham Young University) World Water Project. (2016). “Sediment transport database.” Dept. of Civil and Environmental Engineering, Brigham Young Univ., Provo, UT, 〈http://worldwater.byu.edu/app/index.php/sediment〉 (Aug. 26, 2016).
Conner, L. G., Ames, D. P., and Gill, R. A. (2013). “HydroServer Lite as an open source solution for archiving and sharing environmental data for independent university labs.” Ecol. Inform., 18, 171–177.
Creative Commons (2016). “Attribution 2.0 generic license.”〈http://creativecommons.org/licenses/by/2.0/〉 (Aug. 26, 2016).
Crowder, D. W., and Knapp, H. V. (2005). “Effective discharge recurrence intervals of Illinois streams.” Geomorphology, 64(3–4), 167–184.
Doyle, M. W., Shields, D., Boyd, K. F., Skidmore, P. B., and Dominick, D. W. (2007). “Channel-forming discharge selection in river restoration design.” J. Hydraul. Eng., 831–837.
Horsburgh, J. S., Tarboton, D. G., Maidment, D. R., and Zaslavsky, I. (2008). “A relational model for environmental and water resources data.” Water Resour. Res., 44(5), 1–12.
Kadlec, J., StClair, B., Ames, D. P., and Gill, R. A. (2015). “WaterML R package for managing ecological experiment data on a CUAHSI Hydroserver.” Ecol. Inform., 28, 19–28.
King, J. G., Emmett, W. W., Whiting, P. J., Kenworthy, R. P., and Barry, J. J. (2004). “Sediment transport data and related information for selected coarse-bed streams and rivers in Idaho.”, U.S. Dept. of Agriculture, Forest Service, Rocky Mountain Research Station, Fort Collins, CO.
Leopold, L. B., and Emmett, W. W. (1976). “Bedload measurements, East Fork River, Wyoming.” Proc. Natl. Acad. Sci., 73(4), 1000–1004.
Milhouse, R. T. (1973). “Sediment transport system in a gravel-bottomed stream.” Ph.D. thesis, Oregon State Univ., Corvalis, OR.
Montgomery, D. R., and Buffington, J. M. (1997). “Channel-reach morphology in mountain drainage basins.” Bull. Geol. Soc. Am., 109(5), 596–611.
Recking, A. (2010). “A comparison between flume and field bedload transport data and consequences for surface-based bedload transport prediction.” Water Resour. Res., 46(3), W03518.
Rosgen, D. L. (1996). Applied river morphology, Wildland Hydrology, Pagosa Springs, CO.
Rosgen, D. L., Silvey, H. L., and Frantila, D. (2006). “Watershed assessment of river stability and sediment supply (WARSSS).” Wildland Hydrology, Fort Collins, CO.
Simon, A., Dickerson, W., and Heins, A. (2004). “Suspended-sediment transport rates at the 1.5-year recurrence interval for ecoregions of the United States: Transport conditions at the bankfull and effective discharge?” Geomorphology, 58(1–4), 243–262.
Tarboton, D. G., et al. (2011). “Data interoperability in the hydrologic sciences.” Proc., Environmental Information Management Conf., National Center for Ecological Analysis and Synthesis, Santa Barbara, CA.
Wayback Machine. (2016). “http://bedloadresearch.org/” 〈https://goo.gl/QVzTFV〉 (Aug. 26, 2016).
Williams, G. P. (1978). “Bank-full discharge of rivers.” Water Resour. Res., 14(6), 1141–1154.
Information & Authors
Information
Published In
Journal of Hydraulic Engineering
Volume 143 • Issue 2 • February 2017
Copyright
© 2016 American Society of Civil Engineers.
History
Received: Feb 25, 2015
Accepted: Jun 13, 2016
Published online: Sep 28, 2016
Published in print: Feb 1, 2017
Discussion open until: Feb 28, 2017
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.