Sensitivity Analysis and Statistical Convergence of a Saltating Particle Model
Publication: Journal of Hydraulic Engineering
Volume 141, Issue 5
Abstract
Saltation models provide considerable insight into near-bed sediment transport. This paper outlines a simple, efficient numerical model of stochastic saltation, which is validated against previously published experimental data on saltation in a channel of nearly horizontal bed. Convergence tests are systematically applied to ensure the model is free from statistical errors emanating from the number of particle hops considered. Two criteria for statistical convergence are derived; according to the first criterion, at least hops appear to be necessary for convergent results, whereas saltations seem to be the minimum required in order to achieve statistical convergence in accordance with the second criterion. Two empirical formulas for lift force are considered: one dependent on the slip (relative) velocity of the particle multiplied by the vertical gradient of the horizontal flow velocity component; the other dependent on the difference between the squares of the slip velocity components at the top and bottom of the particle. The former is found to give more stable results. A parameter study indicates that the saltation length has a minimum value with increasing particle diameter (at ) for a given transport stage. Variations in the friction coefficient and collision line level have a negligible effect on the saltation statistics within the ranges considered. Regression equations are obtained for each of the saltation characteristics. Finally, the model is used to evaluate the bed-load transport rate, which is in satisfactory agreement with common formulas based on flume data, especially when compared against other saltation-derived expressions.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The first author is supported by the Mexican National Council for Science and Technology (CONACYT) through Scholarship No. 310043. The authors would also like to thank University College Cork, Ireland, where they were based previously and where much of the work reported herein was undertaken.
References
Anderson, R. S., and Hallet, B. (1986). “Sediment transport by wind: Toward a general model.” Geol. Soc. Am. Bull., 97(5), 523–535.
Bagnold, R. A. (1973). “The nature of saltation and of ‘bed-load’ transport in water.” Proc. R. Soc. London. Ser. A, 332(1591), 473–504.
Diplas, P., Dancey, C. L., Celik, A. O., Valyrakis, M., Greer, K., and Akar, T. (2008). “The role of impulse on the initiation of particle movement under turbulent flow conditions.” Science, 322(5902), 717–720.
Fernandez Luque, R., and Van Beek, R. (1976). “Erosion and transport of bed-load sediment.” J. Hydraul. Res., 14(2), 127–144.
Francis, J. R. D. (1973). “Experiments on the motion of solitary grains along the bed of a water-stream.” Proc. R. Soc. London, Ser. A, 332(1591), 443–471.
Lee, H., Chen, Y., You, J., and Lin, Y. (2000). “Investigations of continuous bed load saltating process.” J. Hydraul. Eng., 691–700.
Lee, H., and Hsu, I. (1994). “Investigation of saltating particle motions.” J. Hydraul. Eng., 831–845.
Meyer-Peter, E., and Müller, R. (1948). “Formulas for bed-load transport.” Int. Association for Hydraulic Structures Research, 2nd meeting, IAHR, Stockholm, Sweden.
Niño, Y., and García, M. (1994). “Gravel saltation. 2. Modeling.” Water Resour. Res., 30(6), 1915–1924.
Niño, Y., and García, M. (1998a). “Experiments on saltation of sand in water.” J. Hydraul. Eng., 1014–1025.
Niño, Y., and García, M. (1998b). “Using Lagrangian particle saltation observations for bedload sediment transport modelling.” Hydrol. Processes, 12(8), 1197–1218.
Saffman, P. G. (1965). “The lift on a small sphere in a slow shear flow.” J. Fluid Mechan., 22(02), 385–400.
Sekine, M., and Kikkawa, H. (1992). “Mechanics of saltating grains. II.” J. Hydraul. Eng., 536–558.
Soulsby, R. (1997). Dynamics of marine sands: A manual for practical applications, Thomas Telford, Great Britain.
Spinewine, B. (2005). “Two-layer flow behaviour and the effects of granular dilatancy in dam-break induced sheet-flow.” Ph.D. thesis, Université Catholique de Louvain, Louvain-la-Neuve, Belgium.
Swamee, P., and Ojha, C. (1991). “Drag coefficient and fall velocity of nonspherical particles.” J. Hydraul. Eng., 660–667.
van Rijn, L. (1984). “Sediment transport. Part I: Bed load transport.” J. Hydraul. Eng., 1431–1456.
Yan, K. (2010). “Coastal flood inundation and morphodynamic change.” Ph.D. thesis, Univ. of Oxford, Oxford, U.K.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Dec 11, 2013
Accepted: Nov 9, 2014
Published online: Dec 15, 2014
Published in print: May 1, 2015
Discussion open until: May 15, 2015
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.