Use of Local Soil and Vegetation Classifications to Improve Regional Downstream Hydraulic Geometry Relations
Publication: Journal of Hydraulic Engineering
Volume 141, Issue 5
Abstract
Regional downstream hydraulic geometry equations are developed using flow with a 1.5-year recurrence interval, and corresponding widths, depths, and velocities. The study includes 634 gauge stations located across Canada and are grouped by characteristics that affect or are correlated with bank and bed stability. Jack-knife analysis was done to test the predictive capabilities of each grouping. For width prediction, grouping the data by geology and vegetative characteristics improved predictions in 14 of the 15 categories, with drainage characteristics and mode of deposition groupings showing the best results. Grouping the data by vegetative characteristics showed the best improvement among noncontiguous categories when considering all of the hydraulic geometry variables (width, depth, and velocity). These groupings are investigated further. The study demonstrates that classifying downstream hydraulic geometry equations by local geology and vegetation improves the predictive capabilities of the equations. It also shows that though regionalization does not need to occur in a contiguous region, regionalization still provides better results due to the limited resolution of nationally available GIS datasets. As demonstrated in previous studies, it is also shown that downstream hydraulic equations can be applied to semialluvial rivers. Finally, multiple regression was tested with width prediction as a function of flow and up to three grouping variables. The interaction of the grouping variables showed no improvement in the results.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors wish to thank the anonymous reviewers and the editors for their helpful comments that improved the paper.
References
Anderson, R. J., Bledsoe, B. P., and Hession, W. C. (2004). “Width of streams and rivers in response to vegetation, bank material, and other factors.” J. Am. Water Resour. Assoc., 40(5), 1159–1172.
Camilli, G., and Hopkins, K. D. (1978). “Applicability of chi-square to contingency tables with small expected cell frequencies.” Psychol. Bull., 85(1), 163–167.
Copeland, R. R., Biedenharn, D. S., and Fischenich, J. C. (2000). “Channel-forming discharge.” U.S. Army Corps of Engineers Technical Note, Engineer Research and Development Center Coastal and Hydraulics Lab (ERDC/CHL CHETN-VIII-5, 1-11), Vicksburg, MS.
Copeland, R., Soar, P., and Thorne, C. (2005). “Channel-forming discharge and hydraulic geometry width predictors in meandering sandbed rivers.” Proc., 2005 World Water and Environmental Resources Congress: Impacts of Global Change, ASCE, Reston, VA.
Davies, T., and Sutherland, A. (1980). “Resistance to flow past deformable boundaries.” Earth Surf. Processes, 5(2), 175–179.
Davies-Colley, R. J. (1997). “Stream channels are narrower in pasture than in forest.” N. Z. J. Mar. Freshwater Res., 31(5), 599–608.
Dury, G. (1976). “Discharge prediction, present and former, from channel dimensions.” J. Hydrol., 30(3), 219–245.
Eaton, B., and Church, M. (2007). “Predicting downstream hydraulic geometry: A test of rational regime theory.” J. Geophys. Res. Earth Surf., 112(F3), in press.
Ebisa Fola, M., and Rennie, C. D. (2010). “Downstream hydraulic geometry of clay-dominated cohesive bed rivers.” J. Hydraul. Eng., 136(8), 524–527.
GeoBase. (2009). Land cover, circa 2000-vector, Centre for Topographic Information Earth Sciences Sector, Sherbrook, QC, Canada.
Harman, W., et al. (1999). “Bankfull hydraulic geometry relationships for North Carolina streams.” Proc., American Water Resources Association Specialty Conf., Wildland Hydrology, 401–408.
Hey, R., and Thorne, C. (1986). “Stable channels with mobile gravel beds.” J. Hydraul. Eng., 112(8), 671–689.
Huang, H., and Nanson, G. (1998). “The influence of bank strength on channel geometry: An integrated analysis of some observations.” Earth Surf. Processes Landforms, 23(10), 865–876.
Jenkinson, R. W., and Bomhof, J. (2012). “Assessment of Canada’s hydrokinetic power potential—Phase II methodology validation.” Technical Rep., National Research Council—Ocean Coastal and River Engineering, Ottawa, ON, Canada.
Knighton, D. (1974). “Variation in width-discharge relation and some implications for hydraulic geometry.” Geol. Soc. Am. Bull., 85(7), 1069–1076.
Knighton, D. (1998). Fluvial forms and processes: A new perspective, Wiley, New York.
Lacey, G. (1930). “Stable channels in alluvium.” Inst. Civil Eng. Proc., 229, 259–384.
Lawler, D. M. (1992). “Process dominance in bank erosion.” Lowland floodplain rivers: Geomorphological perspectives, Wiley, Chichester, England, 117–143.
Lawlor, S. M. (2004). “Determination of channel-morphology characteristics, bankfull discharge, and various design-peak discharges in western Montana.” U.S. Geological Survey Scientific Investigations Rep. 2004-5263, Reston, VA, 19.
Lefebvre, G., Rohan, K., and Douville, S. (1985). “Erosivity of natural intact structured clay: Evaluation.” Can. Geotech. J., 22.4(252), 508–517.
Leopold, L. B., and Maddock, T. (1953). “The hydraulic geometry of stream channels and some physiographic implications.” U.S. Geological Survey Professional Paper No. 252, U.S. Government Printing Office, Washington, DC, 57.
McCandless, T. (2003). “Maryland stream survey: Bankfull discharge and channel characteristics of streams in the Allegheny Plateau and the valley and ridge hydrologic regions.”, U.S. Fish and Wildlife Service, Annapolis, MD.
Millar, R. (2005). “Theoretical regime equations for mobile gravel-bed rivers with stable banks.” Geomorphology, 64(3), 207–220.
Molnar, P., and Ramirez, J. A. (2002). “On downstream hydraulic geometry and optimal energy expenditure: Case study of the Ashley and Taieri rivers.” J. Hydrol., 259(1), 105–115.
Montgomery, D., and Gran, K. (2001). “Downstream variations in the width of bedrock channels.” Water Resour. Res., 37(6), 1841–1846.
Moriasi, D., Arnold, J., Van Liew, M., Bingner, R., Harmel, R., and Veith, T. (2007). “Model evaluation guidelines for systematic quantification of accuracy in watershed simulations.” Trans. ASABE, 50(3), 885–900.
Murgatroyd, A., and Ternan, J. (1983). “The impact of afforestation on stream bank erosion and channel form.” Earth Surf. Processes Landforms, 8(4), 357–369.
Nixon, M. (1959). “A study of the bank-full discharges of rivers in England and Wales.” ICE Proc., Vol. 12, 157–174.
Osterkamp, W. (1982). “Perennial-streamflow characteristics related to channel geometry and sediment in Missouri River basin.” U.S. Geological Survey Professional Paper, Alexandria, VA, 37.
Ouarda, T. B. M. J., Girard, C., Cavadias, G. S., and Bobée, B. (2001). “Regional flood frequency estimation with canonical correlation analysis.” J. Hydrol., 254(1–4), 157–173.
Park, C. C. (1977). “World-wide variations in hydraulic geometry exponents of stream channels: An analysis and some observations.” J. Hydrol., 33(1), 133–146.
Ponton, J. R. (1972). “Hydraulic geometry in the Green and Birkenhead basins, British Columbia.” Mountain geomorphology: Geomorphological processes in the Canadian Cordillera, H. O. Slaymaker and H. J. McPherson, eds., Tantalus Research, Vancouver, Canada, 151–160.
Rhodes, D. (1977). “The bfm diagram: Graphical representation and interpretation of at-a-station hydraulic geometry.” Am. J. Sci., 277, 73–95.
Sharpe, D., Russell, H., Grasby, S., and Wozniak, P. (2008). “Hydrogeological regions of Canada: Data release. Geological survey of Canada (GSC).”, Sherbrook, QC, Canada, 20.
SLC (Soil Landscapes of Canada). (1996). Soil landscapes of Canada (SLC), Centre for Land and Biological Resources Research, Ottawa, ON, Canada.
Sutarto, T., Papanicolaou, A. N., Wilson, C. G., and Langendoen, E. J. (2014). “Stability analysis of semicohesive streambanks with concepts: Coupling field and laboratory investigations to quantify the onset of fluvial erosion and mass failure.” J. Hydraul. Eng., 140(9), 04014041.
Thorne, C. R., and Tovey, N. K. (1981). “Stability of composite river banks.” Earth Surf. Processes Landforms, 6(5), 469–484.
USACE (U.S. Army Corps of Engineers). (1994). Channel stability assessment for flood control projects, Washington, DC.
Vachtman, D., and Laronne, J. B. (2013). “Hydraulic geometry of cohesive channels undergoing base level drop.” Geomorphology, 197, 76–84.
Williams, G. P. (1978). “Bank-full discharge of rivers.” Water Resour. Res., 14(6), 1141–1154.
Wohl, E. (2004). “Limits of downstream hydraulic geometry.” Geology, 32(10), 897–900.
Wohl, E., and David, G. (2008). “Consistency of scaling relations among bedrock and alluvial channels.” J. Geophys. Res., 113(F4), F04013.
Information & Authors
Information
Published In
Journal of Hydraulic Engineering
Volume 141 • Issue 5 • May 2015
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Nov 14, 2013
Accepted: Oct 23, 2014
Published online: Dec 9, 2014
Published in print: May 1, 2015
Discussion open until: May 9, 2015
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.